Refine
Year of Publication
- 2019 (23) (remove)
Document Type
- Report (9)
- Contribution to Periodical (6)
- Peer-Reviewed Article (5)
- Working Paper (2)
- Doctoral Thesis (1)
Division
- Kreislaufwirtschaft (23) (remove)
This report provides an overview of the main findings from the different research tasks in the CIRCTER project and delivers selected policy messages with European coverage. The report provides: (Sec. 2) a territorial definition of the circular economy; (Sec. 3) insights into the available statistics on material and waste patterns and flows and their interpretation, alongside new territorial evidence on both aspects; (Sec. 4) a sectoral characterisation of the circular economy at regional level (NUTS-2), including data on turnover and jobs; (Sec. 5) key findings from the CIRCTER case studies; (Sec. 6) a systemic interpretation of the circular economy that works as a knowledge-integration mechanism for the entire report; (Sec. 7 and 8) an analysis of the most relevant circular economy policies and strategies at various territorial levels; (Sec. 8) a subset of policy recommendations focusing in particular on territorial and cohesion policies, and; (Sec. 9) suggestions for further research.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
Digitalisation is in full swing and it is changing and influencing the world of the 21st century as no other dynamics of change has done before. Dealing with its impacts and at the same time shaping digitalisation itself is therefore a core task for achieving a globally sustainable transformation (German Advisory Council on Global Change - WGBU, 2019). But which direction should digitalisation take to ensure that it makes e ective contributions to globally sustainable development? And what is the specific approach needed to steer digitalisation in the right direction?
Because prevention is closely linked to complex consumption patterns, even cultural changes, such as increasing environmental awareness, changes in the average size of households or changes in the industrial structure of an economy, are relevant factors for the interpretation of changes in the generation of waste - it is more or less impossible to isolate the effect of specific waste prevention measures in this complex system. This must be considered, in particular, in international comparisons of policies and their potential transferability. The guidelines of the European Commission on waste prevention also point to the particular problem of data availability in the area of prevention: as waste statistics focus mainly on the treatment and fate of wastes, they are often of limited value for prevention of waste because they don't give sufficient information about their origins or reasons for their generation.
Against this background, this report has the following objectives:
Chapter 2 discusses strengths and weaknesses of typical waste-based prevention indicators; Chapter 3 analyses possible indicators that consider an upstream perspective and take into account the ecological rucksacks of products and components that have become waste; Chapter 4 focuses on specific product groups that could be targeted by waste prevention indicators.
In general, the report describes the complexity of measuring waste prevention and outlines pros and cons of possible approaches. The final chapter aims to draw rather pragmatic conclusions on possibly most preferable options for future policy-making.
Das Kreislaufwirtschaftsgesetz (KrWG) verlangt mit Bezug auf das Abfallvermeidungsprogramm (AVP) die Benennung zweckmäßiger Maßstäbe für Abfallvermeidungsmaßnahmen (AVM), anhand derer die Fortschritte bei der Entkopplung der mit der Abfallerzeugung verbundenen Auswirkungen auf Mensch und Umwelt vom Wirtschaftswachstum erfasst werden können. Das AVP benennt mögliche Indikatoren, allerdings ist unklar, inwieweit diese das Entstehen von Abfällen darstellen oder die Effekte von AVM abbilden können. Mögliche Bewertungsmaßstäbe für die Messung des Abfallvermeidungserfolges wurden analysiert, auf ihre Eignung geprüft und ein Set an Indikatoren erarbeitet, um eine kontinuierliche Messung des Erfolges von AVM zu ermöglichen.
Die Autoren verdeutlichen in diesem Papier, dass der Megatrend Digitalisierung nicht zwingend unkontrollierbar über die Wirtschaft und die Gesellschaft hereinbricht. Seine Wirkung hängt vom menschlichen Verhalten, von der Gestaltung neuer Prozessen in Organisationen, aber auch Anpassungen der gesetzlichen Rahmenbedingungen ab. Dieses sozio-kulturelle, organisatorische und institutionelle Umfeld der digitalen Innovationen könne und müsse im Sinne ökologischer Nachhaltigkeit beeinflusst werden. Politik sei hier aufgefordert auf der Basis fundierter Analysen flankierend tätig zu werden. Die Autoren fordern daher, für die Digitalwirtschaft eine eigene sektorspezifische Politik zu entwickeln, wie sie für andere umweltrelevante Sektoren - etwa die Energiewirtschaft, Chemieindustrie oder Autoindustrie - bereits etabliert ist.
Abfallwirtschaftliche Produktverantwortung unter Ressourcenschutzaspekten (RePro) : Abschlussbericht
(2019)
Elektro- und Elektronikaltgeräte enthalten eine Vielzahl von umwelt- und ressourcenrelevanten Metallen wie Gold und Neodym, welche derzeit noch nicht optimal recycelt werden. Im vorliegenden Projekt wurden die Mengenpotenziale von 10 dieser Metalle in 30 ressourcenrelevanten Elektrogerätearten quantifiziert und die bestehenden Verluste bei der Elektroaltgeräte-Entsorgung von der Sammlung über die Behandlung bis zur Metallrückgewinnung über Mengenstrombilanzen ermittelt, teilweise unterstützt durch Sortieranalysen und Behandlungsversuche. Die Studie leitet daraus Maßnahmenempfehlungen zur Optimierung der Erfassungsstrukturen sowie der Behandlungs- und Verwertungssysteme für Elektroaltgeräte aus privaten Haushalten zur Rückgewinnung der betrachteten Metalle ab.
Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
Eine sich vorrangig auf technologische Innovationen und Entlastungsgewinne stützende Wirtschafts- und Umweltpolitik wird für die dauerhafte Senkung der Ressourcennutzung nicht ausreichen. Es bedarf auch kultureller Veränderungen im Umgang mit Ressourcen und ambitionierter und wegweisender politischer Maßnahmen.
Each year, approximately one-third of the food produced for human consumption is lost or wasted worldwide. The waste of resources used for this food has significant environmental impacts in terms of land and water use as well as greenhouse gas emissions. Consequently, one of the targets of the UN sustainable development goals is to halve per capita global food waste at the retail and consumer levels and reduce food losses along production and supply chains by 2030. However, sufficient knowledge about the suitability of instruments for food waste prevention is still lacking. The purpose of this paper is therefore threefold: first, it outlines the generation and causes of food losses and waste. Second, it discusses good practices from different countries, such as laws to reduce food waste, voluntary agreements, awareness campaigns and results from behavioural economics. Finally, based on these findings, this paper identifies barriers to as well as requirements for the implementation of effective and efficient instruments.
Der Anlass für die Evaluation des Deutschen Ressourceneffizienzprogramms ProgRess ist seine Fortschreibung im Jahr 2020. In zahlreichen Interviews identifizieren die Autorinnen und Autoren Stärken und Schwächen und zeigen Wege für eine institutionelle und strategische Weiterentwicklung auf. Die Bedeutung des Programms wird als überwiegend positiv, die bisherigen Ressourceneffizienzwirkungen hingegen als durchwachsen bewertet. Den Umsetzungsstand konnten die Befragten wenig beurteilen, da Indikatoren bislang nur für einen Teil der Maßnahmen vorhanden sind. Eine Priorisierung der Aktivitäten, verbindlichere Instrumente und Zielvorgaben sowie eine bessere Mittelausstattung gehören zu den Empfehlungen.