Refine
Has Fulltext
- yes (43) (remove)
Year of Publication
Document Type
- Peer-Reviewed Article (43) (remove)
Division
- Stoffströme und Ressourcenmanagement (43) (remove)
This article proposes a policy framework for analysing corporate governance toward sustainable development. The aim is to set up a framework for analysing market evolution toward sustainability. In the first section, the paper briefly refers to recent theories about both market and government failures that express scepticism about the way that framework conditions for market actors are set. For this reason, multi-layered governance structures seem advantageous if new solutions are to be developed in policy areas concerned with long-term change and stepwise internalisation of externalities. The paper introduces the principle of regulated self-regulation. With regard to corporate actors| interests, it presents recent insights from theories about the knowledge-based firm, where the creation of new knowledge is based on the absorption of societal views. The result is greater scope for the endogenous internalisation of externalities, which leads to a variety of new and different corporate strategies. Because governance has to set incentives for quite a diverse set of actors in their daily operations, the paper finally discusses innovation-inducing regulation. In both areas, regulated self-regulation and innovation-inducing regulation, corporate and political governance co-evolve. The paper concludes that these co-evolutionary mechanisms may assume some of the stabilising and orientating functions previously exercised by framing activities of the state. In such a view, the government's main function is to facilitate learning processes, thus departing from the state's function as known from welfare economics.
The paper aims to shed light on the methodological challenges of GHG monitoring at local level and to give an overview on current practices. Questions addressed are as follows: How do the methodologies which underlie different GHG inventory tools differ? What are the critical variables explaining differences between inventories? Can different GHG inventory tools be compatible - and/or interoperable - and under which conditions? The first section discusses methodological challenges related to the formation of local GHG inventories. Rather than giving a comprehensive overview on methodological problems, this section mainly highlights some of the central methodological challenges posed by local GHG inventories. This overview identifies critical variables and clarifies concepts that are necessary for the understanding of the subsequent analysis. In section two, some of the most advanced GHG inventory tools are analysed and the most important differences between these tools are highlighted. The paper concludes that the methodologies are not consistent. Local GHG inventories can thus hardly be compared. The paper gives research and policy recommendations towards greater comparability and sketches the requirements of an international protocol on urban GHG inventories.
This paper undertakes a step to explaining the international economics of resource productivity. It argues that natural resources are back on the agenda for four reasons: the demand on world markets continues to increase, the environmental constraints to using resources are relevant throughout their whole life cycle, the access to critical metals could become a barrier to the low carbon economy, and uneven patterns of use will probably become a source of resource conflicts. Thus, the issue is also of relevance for the transition to a low carbon economy. "Material Flow Analysis" is introduced as a tool to measure the use of natural resources within economies and internationally; such measurement methodology now is being harmonized under OECD auspices. For these reasons, the paper argues that resource productivity - that is the efficiency of using natural resources to produce goods and services in the economy - will become one of the key determinants of economic success and human well-being. An empirical chapter gives evidence on time series of resource productivity increases across a number of economies. Introducing the notion of "material flow innovation", the paper also discusses the innovation dynamics and issues of competitiveness. However, as the paper concludes, market barriers make a case for effective resource policies that should provide incentives for knowledge generation and get the prices right.
The physical dimension of international trade. Part 1: Direct global flows between 1962 and 2005
(2010)
The physical dimension of international trade is attaining increased importance. This article describes a method to calculate complete physical trade flows for all countries which report their trade to the UN. The method is based on the UN Comtrade database and it was used to calculate world-wide physical trade flows for all reporting countries in nine selected years between 1962 and 2005. The results show increasing global trade with global direct material trade flows reaching about 10 billion tonnes in 2005, corresponding to a physical trade volume of about 20 billion tonnes (adding both total imports and total exports). The share from European countries is declining, mainly in favour of Asian countries. The dominant traded commodity in physical units was fossil fuels, mainly oil. Physical trade balances were used to identify the dominant resource suppliers and demanders. Australia was the principal resource supplier over the period with a diverse material export structure. It was followed by mainly oil-exporting countries with varying volumes. As regards to regions, Latin America, south-east Asian islands and central Asia were big resource exporters, mostly with increasing absolute amounts of net exports. The largest net importers were Japan, the United States and single European countries. Emerging countries like the "Asian Tigers" with major industrial productive sectors are growing net importers, some of them to an even higher degree than European countries. Altogether, with the major exception of Australia and Canada, industrialized countries are net importers and developing countries and transition countries are net exporters, but there are important differences within these groups.
Die globalen Rohstoffmärkte weisen Defizite mit erheblichem Konfliktpotenzial auf. Die Bewältigung von Umweltbelastungen, Ressourcenkonflikten, illegalem Handel und Preissprüngen bedürfen einer institutionellen Ordnung. Eine global nachhaltige Ressourcennutzung erfordert verbesserte und neue Governance-Mechanismen, die sowohl privatwirtschaftliche als auch staatliche Akteure einbeziehen. Mögliche neue Governance-Ansätze wären die Gründung einer International Resource Management Agency, die Schaffung eines internationalen Metall-Covenants und eines Abkommens zum nachhaltigen Ressourcenmanagement.
As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.
This paper analyses drivers for resource use and material productivity acrosscountries. This is not only relevant in light of soaring raw material prices but also because EU policies, such as the "Thematic Strategy on the Sustainable Use of Natural Resources" (COM [2005] 670), the EU Raw Materials Initiative (COM [2008] 699) and various similar policies internationally, seek to better manage materials along their life-cycle and across economies. In order to better understand the system dynamics of material use, our paper applies methodologies of material flow analysis and regression analysis to identify the major drivers for resource use and decoupling from GDP. Drivers are understood as those factors that exert influence on human activities to use resources. A panel data set is taken for the European Union for the years 1980–2000 (EU-15) and 1992–2000 (EU-25). The main drivers of resource use were found to be energy efficiency, new dwellings and roads construction activities. Shortcomings of the methodology are also discussed.
Towards a resource policy : unleashing productivity dynamics and balancing international distortions
(2012)
The paper outlines guidelines and pillars of a resource policy. Two reasons favour the formulation of such policy: a demand to increase sluggish resource productivity growth as well as environmental damages occurring along material flows at an international scale. Thus, it is both the innovation and environmental perspective that legitimate policies. The paper surveys recent empirical trends. Referring to research on innovation and transition management, it develops guidelines for a resource policy, namely, market order, provision function, learning processes, market development, and orientation. It furthermore describes four instruments as potential pillars of a future policy mix: a tax on construction minerals, an ecologically differentiated VAT tax, and an international covenant for metals and an international convention for sustainable resource management. The paper finally reflects these guidelines and pillars against weaknesses and ongoing discussions of climate policy. It concludes that despite all uncertainties and complexities, a well-designed resource policy is on the verge of becoming essential for unleashing eco-innovation dynamics.
This paper focuses on market incentives by the introduction of a construction minerals tax as an example of a resource tax. Currently, various European countries levy taxes or duties on primary construction materials, but a harmonisation of the taxation is not planned. Provided the tax rate has a perceptible price effect, the taxation of a resource can foster a demand management or the reduction of the raw material consumption and the governance of side and secondary effects. A construction minerals tax can target the stimulation of demand for secondary raw materials and recycled products, and - because the reuse of construction and demolition waste has technical limits - a stronger emphasis on the conservation of buildings and infrastructures. This has positive effects on the environment and the innovation efforts and it helps to internalise externalities. Germany, used as a case study in this paper, does not raise any taxes on other raw materials than energy sources at the federal level. For this reason, potential impacts of the introduction of a construction minerals tax will be explored and the results of a simulation will be provided.
This paper addresses future perspectives for the management of resources on an international level. Failures of international open markets result in significant material leakage. Here, taking the example of material used vehicles, we develop elements of an international metal covenant that should allow for a more sustainable management of global material flows in that area. Our proposal is based on two principles: any regulation should actively seek industry participation, taking advantage of business interest in supplying a sufficient quantity of materials while lowering materials costs; and it should also address public issues such as sustainability of recycling and waste. In this paper we first analyse contracts as a tool for bridging gaps in knowledge when multiple actors are involved. We then give empirical evidence for material leakage in the case of used vehicles from Germany, before outlining the elements of a proposed international metals covenant. Finally, we analyse potential impacts and discuss legal and institutional issues.
Concerns over climate change and the security of industrial feedstock supplies have been opening a growing market for biobased materials. This development, however, also presents a challenge to scientists, policy makers, and industry because the production of biobased materials requires land and is typically associated with adverse environmental effects. This article addresses the environmental impacts of biobased materials in a meta-analysis of 44 life cycle assessment (LCA) studies. The reviewed literature suggests that one metric ton (t) of biobased materials saves, relative to conventional materials, 55 ± 34 gigajoules of primary energy and 3 ± 1 t carbon dioxide equivalents of greenhouse gases. However, biobased materials may increase eutrophication by 5 ± 7 kilograms (kg) phosphate equivalents/t and stratospheric ozone depletion by 1.9 ± 1.8 kg nitrous oxide equivalents/t. Our findings are inconclusive with regard to acidification (savings of 2 ± 20 kg sulfur dioxide equivalents/t) and photochemical ozone formation (savings of 0.3 ± 2.4 kg ethene equivalents/t). The variability in the results of life cycle assessment studies highlights the difficulties in drawing general conclusions. Still, common to most biobased materials are impacts caused by the application of fertilizers and pesticides during industrial biomass cultivation. Additional land use impacts, such as the potential loss of biodiversity, soil carbon depletion, soil erosion, deforestation, as well as greenhouse gas emissions from indirect land use change are not quantified in this review. Clearly these impacts should be considered when evaluating the environmental performance of biobased materials.
Consumption of natural resources should not exceed sustainable levels. The increasing use of biofuels and to some extent biomaterials, on top of rising food and feed demands, is causing countries to use a growing amount of global land, which may lead to land use conflicts and the expansion of cropland and intensive cultivation at the expense of natural ecosystems. Selective product certification cannot control the land use change triggered by growing overall biomass consumption. We propose a comprehensive approach to account for the global land use of countries for their domestic consumption, and assess this level with regard to globally acceptable levels of resource use, based on the concept of safe operating space. It is shown that the European Union currently uses one-third more cropland than globally available on a per capita basis and that with constant consumption levels it would exceed its fair share of acceptable resource use in 2030. As the use of global forests to meet renewable energy targets is becoming a concern, an approach to account for sustainable levels of timber flows is also proposed, based on the use of net annual increment, exemplified with preliminary data for Switzerland. Altogether, our approach would integrate the concept of sustainable consumption into national resource management plans; offering a conceptual basis and concrete reference values for informed policy making and urging countries to monitor and adjust their levels of resource consumption in a comprehensive way, respectful of the limits of sustainable supply.
The exploitation of coltan in Central Africa can be considered a case of conflict minerals due to its nature. Many international organizations and bodies, national governments and private sector organizations seek to address this conflict, in particular via transparency, certification and accountability along the material supply chain. This paper analyses the international trade dimension of coltan and gives evidence on the dimension of illicit trade of coltan. The authors start from the hypothesis that illicit trade of coltan sooner or later will enter the market and will be reflected in the statistics. The paper is structured in the following manner: first, a short section gives a profile of coltan production and markets; second, an overview of the mining situation in the Democratic Republic of Congo (DRC) and related actors. The third section addresses mechanisms, actors and measurement issues involved in the international trade of coltan. The final part draws lessons for certification and conflict analysis and offers some guidance for future research.
The paper identifies two main possible gateways to trace illegal trade in coltan: the neighboring countries, especially Rwanda, and the importing countries for downstream production, in particular China. Our estimation is that the value of such illicit trade comes close to $ 27 million annually (2009), roughly one-fifth of the world market volume for tantalum production. With regard to any certification the paper concludes that this will become challenging for business and policy: (a) Central Africa currently is the largest supplier of coltan on the world market, many actors profit from the current situation and possess abilities to hide responsibility; (b) China will need to accept more responsibility, a first step would be the acceptance of the OECD guidelines on due diligence; (c) better regional governance in Central Africa comprises of resource taxation, a resource fund and fiscal coordination. An international task force may provide more robust data, however more research will also be needed.
In the past few decades, geochemically scarce metals have
become increasingly relevant for emerging technologies in
domains such as energy supply and storage, information and
communication, lighting or transportation, which are regarded as
cornerstones in the transition towards a sustainable post-fossil
society. Accordingly, the supply risks of scarce metals and possible
interventions towards their more sustainable use have been
subject to an intense debate in recent studies. In this article, we
integrate proposed intervention options into a generic life cycle
framework, taking into account issues related to knowledge
provision and to the institutional setting. As a result, we obtain
a landscape of intervention fields that will have to be further
specified to more specific intervention profiles for scarce metals
or metals families. The envisioned profiles are expected to have
the potential to reduce action contingency and to contribute to
meeting the sustainability claims often associated with emerging
technol ogies.
Global trade is increasingly being challenged by observations of growing burden shifting, in particular of environmental problems. This paper presents the first worldwide calculations of shifted burden based on material flow indicators, in particular direct and indirect physical trade balances. This study covers the period between 1962 and 2005 and includes between 82 and 173 countries per year. The results show that indirect trade flow volumes have increased to around 41 billion tonnes in 2005. The traded resources with the highest share of associated indirect flows are iron, hard coal, copper, tin and increasingly palm oil. Regarding the burden balance between regions, Europe is the biggest shifter whereas Australia and Latin America are the largest takers of environmental burden due to resource extraction. To evaluate the findings from a global perspective, the results are analysed in terms of resource flow induced environmental pressure related to a country's land area in terms of total and per capita area. Resource endowment and population density seem to be more relevant in determining the physical trade balance, including indirect flows, than income level.
Defining the prevention of waste as top priority of the waste hierarchy - as confirmed by the revised Waste Framework Directive (WFD) - is much more than a simple amendment of ways to deal with waste, but means nothing less than a fundamental change of the socio-technical system of waste infrastructures and requires a transition from end-of-pipe technologies towards an integrated management of resources. The WFD therefore obligates member states to develop national waste prevention programs as a new policy instrument with the development of waste prevention indicators as one of the core elements. The article discusses the limitations of waste-based key figures and shows the need for more process-oriented indicators. As part of the development of national waste prevention programs such indicators reveal the relevance of different barriers that have to be overcome in order to make prevention an effective top priority in the waste hierarchy. With regard to path dependencies caused by sunk costs in end-of-pipe waste infrastructures the absolute amount of integrated environmental investments, as well as their share of the total waste-related investments, can be seen as indicators for the level of innovation activities aimed at waste prevention. Sector-specific indicators for the production phase could be used as benchmarks and to highlight differences in the need for policy interventions.
Multinational mining companies operating in Latin America increasingly publish sustainability reports which outline their contributions to sustainable development. Companies argue that reports help communities better understand the importance of the benefits created by mining. However, we argue that sustainabilityreporting can only play a role in improving a company's performance and reputation if the quality of the reported data is good enough to answer community-raised contentious issues and if such are tackled through a stakeholder engagement process which includes "anti-mining" groups. The paper examines a miningconflict in Argentina's Bajo de la Alumbrera open pit mine. The assessment is based on a content analysis of Alumbrera's Sustainability Report (SR), primarily from 2009, complemented with insights from the 2010 and 2011 reports. The study reveals that environmental and economic indicators are the most contentious and least reported. The reports examined only briefly acknowledge these issues, and fail to detail the procedures followed to identify and engage stakeholders.
Als einer der weltweit führenden Industriestandorte ist Deutschland abhängig von der Versorgung mit Rohstoffen. Aber nur noch wenige Bau- und Massenrohstoffe wie Kies, Sand oder Kalkstein können aus heimischen Lagerstätten gewonnen werden; Industriemineralien, Energierohstoffe und vor allem metallische Rohstoffe müssen in großem Umfang aus dem Ausland eingeführt werden. Strategische Ansätze wie die Ressourcenstrategie der EU oder die Ressourceneffizienzstrategie des BMU setzen daher in zunehmendem Maße auf die Senkung des Primärrohstoffverbrauchs durch den Einsatz von Sekundärrohstoffen und die Erhöhung der Anteile recycelter Abfälle in Produkten - mit massiven Konsequenzen für die Planung abfallwirtschaftlicher Infrastrukturen.
The Low Carbon Future Cities (LCFC) project aims at facing a three dimensional challenge by developing an integrated city roadmap balancing: low carbon development, gains in resource efficiency and adaptation to climate change. The paper gives an overview of the first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi - the Chinese pilot city for the LCFC project. As a first step, a detailed emission inventory following the IPCC guidelines for Wuxi has been carried out. In a second step, the future development of energy demand and related CO2 emissions in 2050 were simulated in a current policy scenario (CPS). In parallel, selected aspects of material and water flows for the energy and the building sector were analyzed and modeled. In addition, recent and future climate impacts and vulnerability were investigated. Based on these findings, nine key sectors with high relevance to the three dimensions could be identified. Although Wuxi's government has started a path to implement a low carbon plan, the first results show that, for the shift towards a sustainable low carbon development, more ambitious steps need to be taken in order to overcome the challenges faced.