Biofuels and electrification are potential ways to reduce CO2 emissions from the transport sector, although not without limitations or associated problems. This paper describes a life-cycle analysis (LCA) of the Brazilian urban passenger transport system. The LCA considers various scenarios of a wholesale conversion of car and urban bus fleets to 100% electric or biofuel (bioethanol and biodiesel) use by 2050 compared to a business as usual (BAU) scenario. The LCA includes the following phases of vehicles and their life: fuel use and manufacturing (including electricity generation and land-use emissions), vehicle and battery manufacturing and end of life. The results are presented in terms of CO2, nitrous oxides (NOx) and particulate matter (PM) emissions, electricity consumption and the land required to grow the requisite biofuel feedstocks. Biofuels result in similar or higher CO2 and air pollutant emissions than BAU, while electrification resulted in significantly lower emissions of all types. Possible limitations found include the amount of electricity consumed by electric vehicles in the electrification scenarios.
Creating statistics for China's building energy consumption using an adapted energy balance sheet
(2019)
China's regular energy statistics does not include the building sector, and data on building energy demand is included in other types of energy consumption in the Energy Balance Sheet (EBS). Therefore data on building energy demand is not collected based on statistics, but rather calculated or estimated by various approaches in China. This study aims at developing and testing China's building energy statistics by applying an adapted EBS. The advantage of the adapted EBS is that statistical data is from the regular statistical system and no additional statistical efforts are needed. The research result shows that the adapted EBS can be included in China regular energy statistical system and can be standardized in a transparent way. Testing of the adapted EBS shows that China's building energy demand has shown an annual increase of 7.6% since 2001, and a lower contribution to the total energy demand as compared to the developed world. There is also a close link to lifestyle and living standard while industrial energy demand is mainly driven by economy and decoupling of building energy demand with increasing of building floor area, this is due to a considerable improvement of building energy efficiency. The adapted EBS creates a method for China conducting statistics of building energy consumption at the sector level in a uniform way and serves as the basis for any sound building energy efficiency policy decisions.
Climate researchers agree that anthropogenic greenhouse gas emissions significantly contribute to climate change, and that radical measures to reduce greenhouse gas emissions and to adapt to the impacts of no longer avoidable climate change are needed. The German Federal Government with its Climate Protection Plan 2050 reinforced its target to reduce Germany's greenhouse gas emissions by 80 to 95 percent compared with 1990. The achievement of these targets requires nothing less than a fundamental transformation of spatial planning.
In the paper a methodology to scientifically assess the likely impacts of possible combinations of policies or strategies to achieve the energy transition, i.e. to reduce the greenhouse gas emissions of urban mobility and transport is proposed and demonstrated, using the Ruhr Area, the largest conurbation in Germany, as an example.
The results of the policies examined so far can be summarised as follows: Push measures as high energy prices, speed limits or reduction of the number of lanes of main roads are more effective in reducing greenhouse gas emissions than pull measures as the promotion of cycling, walking, electric cars or public transport. Between policies or policy packages there can be positive or negative synergies, i.e. the impacts of measures can reinforce or weaken each other. The results show that even with ambitious policies the greenhouse gas emission targets of the national and state governments will not be achieved and that more radical policies are needed.
Addressing the prevailing mode of high-carbon lifestyles is crucial for the transition towards a net-zero carbon society. Existing studies fail to fully investigate the underlining factors of unsustainable lifestyles beyond individual determinants nor consider the gaps between current footprints and reduction targets. This study examines latent lifestyle factors related to carbon footprints and analyzes gaps between decarbonization targets and current lifestyles of major consumer segments through exploratory factor analysis and cluster analysis. As a case study on Japanese households, it estimates carbon footprints of over 47,000 households using expenditure survey microdata, and identifies high-carbon lifestyle factors and consumer segments by multivariate regression analysis, factor analysis, and cluster analysis. Income, savings, family composition, house size and type, ownership of durables and automobiles, and work style were confirmed as determinants of high-footprint Japanese households, with eight lifestyles factors, including long-distance leisure, materialistic consumption, and meat-rich diets, identified as the main contributory factors. The study revealed a five-fold difference between lowest and highest footprint segments, with all segments overshooting the 2030 and 2050 decarbonization targets. The findings imply the urgent need for policies tailored to diverse consumer segments and to address the underlying causes of high-carbon lifestyles especially of high-carbon segments.
Reflecting trends in the academic landscape of sustainable energy using probabilistic topic modeling
(2019)
Background: Facing planetary boundaries, we need a sustainable energy system providing its life support function for society in the long-term within environmental limits. Since science plays an important role in decision-making, this study examines the thematic landscape of research on sustainable energy, which may contribute to a sustainability transformation. Understanding the structure of the research field allows for critical reflections and the identification of blind spots for advancing this field.
Methods: The study applies a text mining approach on 26533 Scopus-indexed abstracts published from 1990 to 2016 based on a latent Dirichlet allocation topic model. Models with up 1100 topics were created. Based on coherence scores and manual inspection, the model with 300 topics was selected. These statistical methods served for highlighting timely topic trends, differing thematic fields, and emerging communities in the topic network. The study critically reflects the quantitative results from a sustainability perspective.
Results: The study identifies a focus on establishing and optimizing the energy infrastructure towards 100% renewable energies through key modern technology areas: materials science, (biological) process engineering, and (digital) monitoring and control systems. Energy storage, photonic materials, nanomaterials, or biofuels belong to the topics with the strongest trends. The study identifies decreasing trends for general aspects regarding sustainable development and related economic, environmental, and political issues.
Conclusions: The discourse is latently adopting a technology-oriented paradigm focusing on renewable energy generation and is moving away from the multi-faceted concept of sustainability. The field has the potential to contribute to climate change mitigation by optimizing renewable energy systems. However, given the complexity of these systems, horizontal integration of the various valuable vertical research strands is required. Furthermore, the holistic ecological perspective considering the global scale that has originally motivated research on sustainable energy might be re-strengthened, e.g., by an integrated energy and materials perspective. Beyond considering the physical dimensions of energy systems, existing links from the currently technology-oriented discourse to the social sciences might be strengthened. For establishing sustainable energy systems, future research will not only have to target the technical energy infrastructure but put a stronger focus on issues perceivable from a holistic second-order perspective.
Der Eon/RWE-Deal : Marktbeherrschung und Shareholder Value-Politik mit behördlicher Zustimmung
(2019)
Am 17. September 2019 hat die EU-Wettbewerbs-Kommissarin Margrethe Vestager dem Stromkonzern Eon die Übernahme und Zerschlagung der RWE-Tochter Innogy unter leichten Auflagen erlaubt. Damit geht eine vollständige Geschäftsfeldaufteilung zwischen den beiden mächtigsten nationalen Energiekonzernen Eon und RWE einher. Während sich Eon auf die Bereiche Vertrieb und Verteilnetzbetrieb konzentrieren wird, übernimmt RWE die konventionellen Kraftwerke des bisherigen Konkurrenten sowie alle Anlagen der erneuerbaren Stromerzeugung. Auch alle vor rund zwei Jahren zunächst an Innogy abgegebenen Anlagen zur Stromerzeugung werden von RWE wieder zurückgeholt. Zudem erhält RWE eine 16,7-prozentige Beteiligung an Eon. Dazu gab das Bundeskartellamt (BKartA) bereits am 26.02.2019 bekannt, dass es diese Beteiligung für unbedenklich hält.
Die Freigabe der EU-Kommission vom September 2019 ist eine "Entscheidung von enormer Tragweite" die den "gesamten Sektor grundlegend verändern" wird. Denn durch diesen Mega-Deal entstehen im deutschen Energiesektor zwei monolithische Giganten mit bisher nie dagewesener Marktmacht.
Digitalization is a transformation process which has already affected many parts of industry and society and is expected to yet increase its transformative speed and impact. In the energy sector, many digital applications have already been implemented. However, a more drastic change is expected during the next decades. Good understanding of which digital applications are possible and what are the associated benefits as well as risks from the different perspectives of the impacted stakeholders is of high importance. On the one hand, it is the basis for a broad societal and political discussion about general targets and guidelines of digitalization. On the other hand, it is an important piece of information for companies in order to develop and sustainably implement digital applications. This article provides a structured overview of potential digital applications in the German energy (electricity) sector, including the associated benefits and the impacted stakeholders on the basis of a literature review. Furthermore, as an outlook, a methodology to holistically analyze digital applications is suggested. The intended purpose of the suggested methodology is to provide a complexity-reduced fact base as input for societal and political discussions and for the development of new digital products, services, or business models. While the methodology is outlined in this article, in a follow-up article the application of the methodology will be presented and the use of the approach reflected.
Als Direct Air Capture (DAC) werden Technologien zur Abscheidung von Kohlendioxid aus der Atmosphäre bezeichnet. Diese könnten zunehmend zum Einsatz kommen, um CO2 für Power-to-X-Prozesse (PtX) oder zur Erzielung "negativer Emissionen" bereitzustellen. Die Ergebnisse einer multidimensionalen Bewertung im Rahmen der BMWi-Studie "Technologien für die Energiewende" (et 09/2018) zeigen, dass noch große Unsicherheiten bestehen und die Entwicklung überwiegend an Deutschland vorbeigeht.
The need for sustainable energy management at the municipal level is growing, in order to meet EU climate goals. Multiple initiatives have been launched to support municipalities in energy planning and strategy development process. Despite available support, research shows mixed results about implementation of plans and strategies. This research paper analyses what targets municipalities set, how they monitor implementation of their sustainable energy action plans (SEAPs) and searches for the most important factors that have enabled or hindered the implementation of local SEAPs at Latvia. The article shows that, in some cases, there is evidence that SEAP development is a project-based activity, supported by external experts. From municipal personnel point of view, it is a project that ends with approved SEAP, but not a part of their future daily routine. Eventually implementation of the plan is difficult, because municipalities lack experience in daily management of energy data, distribution of responsibilities and implementation of procedures. Municipalities also tend to exclude important stakeholders in their SEAPs, like, private sector, household sector and transport sector, which lead to lower targets and lower achievements in GHG reduction.
Theoretical advances suggest that international governance in general and the Paris Agreement in particular provide a strong signal guiding sociotechnical systems toward decarbonization. We assess this signal and its effects empirically, by examining the struggle of competing narratives as present in the communications of leading US fossil fuel industry associations and companies. The results are then discussed in the context of the national and international climate and energy policy debates in a study period from late 2014 until the announcement of withdrawal from the Paris Agreement in June 2017. We find that the Paris Agreement has institutionalized a narrative paradigm that is surprisingly resilient. While the election of Donald Trump and his climate and energy policy led to a narrative shift in the coal industry, the oil and gas industry remained conspicuously silent in its immediate response and maintained its narrative strategies despite its alignment with the Paris Agreement.
Diesen Technologien wird für das Energiesystem, bei einem zunehmenden Ausbau der fluktuierenden regenerativen Leitenergieträger Wind und Sonneneinstrahlung als zentrale Flexibilitätsoption sowie zur Dekarbonisierung der Industrie - Bereitstellung von Wasserstoff und Kohlenwasserstoffen -, eine Schlüsselrolle zukommen. Wie die bisherigen Erfahrungen mit anderen Energieinfrastrukturen, z. B. Freileitungen oder Windkraftanlagen, zeigen, stellt eine breite gesellschaftliche Akzeptanz einen wesentlichen Erfolgsfaktor für die großflächige Diffusion und Transformation dar. Entsprechend ist die gesellschaftliche Einbettung auch bei der Planung von PtX-Strategien frühzeitig zu beachten.
Unter den Stichworten "Sektorenkopplung" und "Power-to-X" werden derzeit viele Möglichkeiten der direkten und indirekten Elektrifizierung großer Teile der Endenergienachfrage intensiv diskutiert. In diesem Zusammenhang hat die Diskussion um Wasserstoff als Endenergieträger sowie als Feedstock für die Herstellung von synthetischen Kraftstoffen und chemischen Grundstoffen zuletzt stark an Bedeutung gewonnen. Insbesondere der klimaneutrale Umbau der Grundstoffindustrien und hier vor allem der Grundstoffchemie und der Stahlindustrie würde bedeutende Mengen an grünem Wasserstoff benötigen, die räumlich stark auf die großen Industriekerne fokussiert wären. Ein zeitnaher Einstieg in die Schaffung entsprechender Erzeugungskapazitäten und Infrastrukturen könnte dazu führen, dass Wasserstoff - neben erneuerbaren Energien und Energieeffizienz - zum dritten Standbein der Energiewende avanciert.
In vielen deutschen Städten sinken die verkehrsbedingten CO2-Emissionen kaum und vor allem die Belastungen durch Luftschadstoffe aus dem Straßenverkehr sind weiterhin sehr hoch. Deshalb beklagt die Deutsche Umwelthilfe inzwischen über 30 Städte in Deutschland, um durch Fahrverbote für Dieselfahrzeuge das Recht der Menschen auf saubere Atemluft durchzusetzen. Daher suchen die Kommunen zunehmend Wege, die verkehrsbedingten Emissionen zu senken. Dabei kommt kommunalen Flottenbetreibern eine besondere Rolle zu. Sie stehen besonders unter Handlungsdruck, weil durch ein Fahrverbot für Dieselfahrzeuge diese nur noch sehr eingeschränkt eingesetzt werden könnten.
A significant reduction in greenhouse gas emissions will be necessary in the coming decades to enable the global community to avoid the most dangerous consequences of man-made global warming. This fact is reflected in Germany's 7th Federal Energy Research Program (EFP), which was adopted in 2018. Direct Air Capture (DAC) technologies used to absorb carbon dioxide (CO2) from the atmosphere comprise one way to achieve these reductions in greenhouse gases. DAC has been identified as a technology (group) for which there are still major technology gaps. The intention of this article is to explore the potential role of DAC for the EFP by using a multi-dimensional analysis showing the technology's possible contributions to the German government's energy and climate policy goals and to German industry's global reputation in the field of modern energy technologies, as well as the possibilities of integrating DAC into the existing energy system. The results show that the future role of DAC is affected by a variety of uncertainty factors. The technology is still in an early stage of development and has yet to prove its large-scale technical feasibility, as well as its economic viability. The results of the multi-dimensional evaluation, as well as the need for further technological development, integrated assessment, and systems-level analyses, justify the inclusion of DAC technology in national energy research programs like the EFP.
This paper offers a comparative analysis of small wind electrification programmes targeted at remote sheep farming households in two of the windiest regions of the world, Argentine Patagonia and the Falkland Islands/Islas Malvinas. Despite comparable environmental conditions and local livelihoods, their impact was vastly different. Insights from socio-technical systems and strategic niche management approaches offered a deeper understanding of the local context and development dynamics, facilitating the identification of the critical success factors that contributed to these two distinct outcomes and finally highlighting those that can inform the design of future such initiatives. The research is based upon a series of semi-structured interviews with key stakeholders, observational field visits and review of archival sources. The critical factors identified by this case study research include strong and consistent institutional support, investment in robust equipment creation of effective feedback loops from the field and hybridisation. Additionally, a user centred approach that assesses whether small wind is really the right option for each individual household and if so, matches an appropriate energy system to their unique and evolving needs. Finally, empowering users to take on as much responsibility for maintenance as possible by integrating maintenance practices with local culture and ensuring the support of an effective decentralised maintenance network.
Responsible consumption and production is one of the Sustainable Development Goals of the United Nations. To achieve this goal the currently high extraction rates of natural resources, that our economy is based on, needs a transformation of the consumption and production system considering technological as well as social change. One of the promising transition approaches is seen in collaborative consumption with its many facets of socio-cultural innovations and fast growing number of participants and businesses. With a decreasing production of goods, due to a utilisation of underutilised assets, these offers might support an absolute reduction of the global resource use. However, a positive environmental effect depends on the setting and the social practices of such sharing offers and is not sustainable or resource efficient generally. Also, resource efficient practices with a low diffusion potential that stick in a niche offer no leverage to achieve sustainable consumption patterns. Thus, this paper describes a mixed method approach to analyse the resource efficiency and diffusion potential of 20 sharing offers in the area of mobility, housing & travel and everyday objects in Germany. Results show that the overall positive environmental connotation of sharing offers cannot be confirmed. We identified five clusters of offers that are all treated to be differently when it comes to deploying the positive potential and avoid unnecessary societal effort to achieve the mentioned Sustainable Development Goal.
In recent years, most countries in the Middle East and North Africa (MENA), including Jordan, Morocco and Tunisia, have rolled out national policies with the goal of decarbonising their economies. Energy policy goals in these countries have been characterised by expanding the deployment of renewable energy technologies in the electricity mix in the medium term (i.e., until 2030). This tacitly signals a transformation of socio-technical systems by 2030 and beyond. Nevertheless, how these policy objectives actually translate into future scenarios that can also take into account a long-term perspective up to 2050 and correspond to local preferences remains largely understudied. This paper aims to fill this gap by identifying the most widely preferred long-term electricity scenarios for Jordan, Morocco and Tunisia. During a series of two-day workshops (one in each country), the research team, along with local stakeholders, adopted a participatory approach to develop multiple 2050 electricity scenarios, which enabled electricity pathways to be modelled using Renewable Energy Pathway Simulation System GIS (renpassG!S). We subsequently used the Analytical Hierarchy Process (AHP) within a Multi-Criteria Analysis (MCA) to capture local preferences. The empirical findings show that local stakeholders in all three countries preferred electricity scenarios mainly or even exclusively based on renewables. The findings demonstrate a clear preference for renewable energies and show that useful insights can be generated using participatory approaches to energy planning.
Nowadays, the main impetus to apply additive manufacturing (AM) of metals is the high geometric flexibility of the processes and its ability to produce pilot or small batch series. In contrast, resource and energy intensities are often not considered as constraints, even though the turnout of additive manufacturing is high, at least compared to chip removing processes.
The study at hand analyses the material characteristics and environmental impacts of a hose nozzle as an example of a commercial product of simple geometry. The production routes turning (conventional manufacturing) and laser beam melting (additive manufacturing) are compared to each other in terms of natural resource use, climate change potential and primary energy demand. It is found, that the product shows a lower demand for natural resources when produced via AM, but higher carbon emissions and energy demand when using a steel, that is mainly (80%) produced from high-alloyed steel scrap. However, different case studies during the sensitivity analyses showed that a number of factors highly influence the results: the steel source as well as the source of electricity play a major role in determining the environmental performance of the production routes. The authors also found that other production processes (here cold forging of tubes) might be an eco-friendly alternative to both routes, if feasible from an economic point of view.
In regard to the material characteristics, experimental testing revealed that the material advantages of AM produced hose nozzles (in particular higher yield strength) are reduced after a solution heat treatment is applied to the as-produced material, in order to increase corrosion resistance. However, products that do not require this production step might benefit from the higher yield strength, as a lower wall thickness could be realised.
Urban energy systems have been commonly considered to be socio-technical systems within the boundaries of an urban area. However, recent literature challenges this notion in that it urges researchers to look at the wider interactions and influences of urban energy systems wherein the socio-technical sphere is expanded to political, environmental and economic realms as well. In addition to the inter-sectoral linkages, the diverse agents and multilevel governance trends of energy sustainability in the dynamic environment of cities make the urban energy landscape a complex one. There is a strong case then for establishing a new conceptualisation of urban energy systems that builds upon these contemporary understandings of such systems. We argue that the complex systems approach can be suitable for this. In this paper, we propose a pilot framework for understanding urban energy systems using complex systems theory as an integrating plane. We review the multiple streams of urban energy literature to identify the contemporary discussions and construct this framework that can serve as a common ontological understanding for the different scholarships studying urban energy systems. We conclude the paper by highlighting the ways in which the framework can serve some of the relevant communities.
To contribute to a better understanding of consumer food leftovers and to facilitate their reduction in out-of-home settings, our study analyzes the effects of two common intervention strategies for reducing leftovers in a holistic behavioral model. Based on a quasi-experimental baseline-intervention design, we analyzed how the display of information posters and the reduction of portion sizes take an effect on personal, social and environmental determinants in a structural equation model. Applying data from online surveys and observations among 880 guests (503 baseline, 377 intervention) during two weeks in a university canteen, the suggested model allows to assign effects from the two interventions on plate leftovers to specific changes in behavioral determinants. Portion size reductions for target dishes are found to relate to lower levels of plate waste based on conscious perception, represented in smaller portion size ratings. Effects from seeing information posters are found to base on changed personal attitudes, subjective norms and perceived behavioral control. However, depending on how an individual reacts to the information (by only making an effort to finish all food or by making an effort and additionally choosing a different dish in the canteen) there are opposite effects on these determinants and consequently also on plate leftovers. Overall, the differentiated results on intervention effects strongly support the benefits of more holistic and in-depth analyses of interventions to reduce plate leftovers and therefore to contribute to more sustainable food consumption in out-of-home settings.