Refine
Year of Publication
Document Type
- Conference Object (123) (remove)
Language
- English (123) (remove)
Division
- Energie-, Verkehrs- und Klimapolitik (123) (remove)
The German contribution to limiting global warming to two degrees has to be - as in other developed countries, too - a reduction of 80 to 95 percent of CO2 emissions by 2050 compared to 1990. The project "Low Carbon City Wuppertal 2050" has analysed how such a drastic reduction of CO2 could be achieved on a municipal level in the transportation and residential sector by also working on the land use and material flows dimension. The focus of this paper lies on the space heating in the residential sector.
Wuppertal is a city with about 350,000 inhabitants in the West of Germany. According to the CO2 balance (2007) of the city that was adjusted to the year 2010, the emissions that were caused by space heating in the residential sector remained almost the same since 1990. They decreased slightly from 693,000 tons CO2 in 1990 to 691,000 tons in 2010, although final energy use for space heating increased by about 15 percent. But the shift of energy sources especially from coal to gas avoided an increase of emissions. However, the reduction target of 95 percent means that CO2 emissions have to be reduced to 35,000 tons per year until 2050.
A reference scenario shows that the city could achieve about 30 percent of the reduction required with the current trend of renewable energy development and energy efficiency measures such as retrofitting the building stock. But looking at the difficult financial conditions of the municipality as well as at the socio-economic situation of the inhabitants it becomes clear that the remaining 65 percent of the target to a 95 percent reduction will be difficult to reach and that innovative measures of energy efficiency and sufficiency1 need to be developed.
But which social-ecological effects does the implementation of comprehensive climate protection measures have on the inhabitants of a city? How do people live in a "Low Carbon City"? In this paper qualitative and quantitative scenarios will be developed since the combination of both is promising to show both effects: what share could renewable energies, energy efficiency and sufficiency measures have in reaching the target of 95 percent, and how could life look like in an almost CO2 free city in Germany in 2050.
The efficiency strategy to exploit the potential for energy savings in buildings still is applied rather slowly in most countries. In addition, there are indications that energy savings are partly compensated particularly by wealth but also rebound effects, the "empty nest" (persistence of elderly people and couples in family homes), and cohort effects (e.g. vintages of people or buildings). In Germany, as in other European countries, the existing trend in housing is a continuously growing floor space per capita. Over the last decades it expanded from about 20 m2 in 1960 to currently 45 m2 per person. Forecasts expect a further increase to more than 50 m2 per person. Obviously, more floor space needs more energy for space heating and cooling, ventilation, and lighting, but it also allows the household to operate more and or bigger appliances, all of which increase energy consumption.
On the other hand, housing projects emerge offering relatively small private living spaces in combination with various shared spaces to use. Many of them are based on private initiatives. But what is the motivation behind it? And is there a higher need for new living concepts in the future?
The proposed paper presents main drivers of increasing floor space per capita in Germany and discusses the question if more space is necessary for higher comfort. It presents different examples of housing concepts that strive to achieve good living with less space and suggests a "building typology of sufficiency".
Finally, the paper discusses qualitatively to which extent these housing concepts can lead to less energy use and emissions. In this way sufficiency could be best friend with efficiency and tackle wealth, rebound, and other effects that counter-act efficiency progress. But therefore, as the paper concludes, politics and policies should recognise sufficiency as a field of action instead of referring to individual decisions and lifestyles.
Estimating the sufficiency potential in buildings : the space between underdimensioned and oversized
(2019)
The emission reduction potential of energy efficiency and energy supply in buildings is estimated in various energy and climate action plans, scenarios, and potential analyses. But the third pillar of sustainability - sufficiency - is neglected in most studies.The increasing demand of space per person in the residential sector is a trend in most European countries. Its implication on energy use, demand for resources like land, building material, equipment, and waste production is enormous. Next to the ecological impact, the distribution of space has social and societal effects. Thus, sufficiency policies in the building sector complementing efficiency and energy policy are needed for a sustainable development of the European building stock.
But how can a sufficiency potential in the building sector be estimated? How much space and equipment is needed for a decent living and how much is too much? The paper proposes four areas of sufficiency in buildings: space, design and construction, equipment, and use. It presents a set of indicators, a quantitative estimate of energy savings from reduced per capita floor area, and visualises the sufficiency potential in European countries in an experimental approach. The final discussion focuses on the question: What does this mean for policy making?
A case study in the rural area of South Westphalia, Germany, showed the importance of independent intermediaries to support the development and implementation of sustainable energy and efficiency projects. The idea behind the project "Dorf ist Energie(klug)" (Village is Energy(smart)) was to foster, accompany, and support energy and efficiency projects in villages from the first idea to final implementation. Therefore, the South Westphalia Agency as independent intermediary initiated an application process in which villages could apply with their innovative energy and efficiency project ideas. During the following process the chosen "coaching villages" benefitted from the consultation of teams of thematic experts. Villages with less developed projects were supported through idea workshops with experts and study visits.
The accompanying scientific study evaluated the overall process focussing on the transferability, the sustainability and the quality of the process. Furthermore, a self evaluation tool for (energy) projects in villages was developed and tested in two of the participating coaching villages.
The paper gives a short insight into the project "Dorf ist Energie(klug)". It presents the methodology of the accompanying study and the results with a special focus on the role of the South Westphalia Agency as independent intermediary. Finally, it discusses the transferability and sustainability of the project.
The Chinese national government has put energy efficiency and pollution control at the heart of its 11th five-year plan (2005-2010). However, implementation of national policies at the local level is notoriously poor in China. In order to tackle this problem, voluntary agreements were signed between local Environmental Protection Bureaus and 14 mostly state-owned companies from different energy-intensive sectors in Nanjing, Xi'an and Kelamayi in the context of an ongoing EU-funded pilot project. In Nanjing, for instance, agreed targets are in the range of a 3-5% reduction in energy intensity by 2009 over a 2007 baseline. The pilot agreements are informed by Dutch experiences with long-term agreements on energy efficiency (LTA/1989-1999) as European best practice, but have been significantly adjusted to Chinese circumstances. Much emphasis was put on process management applying a cooperative approach throughout. Each enterprise put together a so-called Energy Action Team for voluntary agreement development and implementation. This helped to create a sense of ownership in the companies and assigned clear responsibilities. Energy Action Teams conducted Energy Potential Scans in cooperation with a Dutch expert to identify energy saving potentials and possible measures to realize them. On this basis, achievable targets were agreed and a detailed action plan was developed. A first evaluation is scheduled for April 2009. By lifting industry on a more equal power level with government authorities, voluntary agreements showed to be an effective policy instrument to overcome traditional institutional constraints to environmental policy implementation at the local level in China.
Innovation and diffusion of car-sharing for sustainable consumption and production of urban mobility
(2008)
Energy efficiency of a range of domestic appliances covered by the labelling and ecodesign directives has improved significantly over the last 15 years. However, the power consumption of the German residential sector has remained relatively constant over this period. Besides other factors, such as decreasing average household size, the main reasons for this development were the increases of the types, features, size, equipment stock and usage times of appliances and devices in private households.
The project "Energy Sufficiency - strategies and instruments for a technical, systemic and cultural transformation towards sustainable restriction of energy demand in the field of construction and everyday life" investigates how the complementation of energy efficiency with energy sufficiency could lead to more user adequate domestic products and product-service systems and thereby result in an absolute reduction of power consumption.
In this project, energy sufficiency is defined as a strategy to reduce energy consumption by three approaches:
1. Quantitative reduction of sizes, features, usage times of devices etc.
2. Substitution of technical equipment in households by e.g.urban services.
3. Adjustment of technical services delivered by appliances toutility needed and desired by users.
The energy saving effects of an application of these approaches were modelled for different types of households and the energy saving potentials of energy sufficiency quantified. Innovative approaches for user adequate products and services were developed in open innovation workshops by the Design Thinking method. The paper summarizes some of the intermediate results of theoretical and transdisciplinary investigations of the project that runs until May 31, 2016. Furthermore, a first set of design criteria for user adequate appliances enabling energy sufficiency are developed based on these results. The paper concludes with suggestions for the future development of energy labelling and ecodesign derived from the design criteria and supplemented by examples of existing requirements according to the voluntary environmental label "Blauer Engel".