Refine
Year of Publication
Document Type
- Report (72)
- Peer-Reviewed Article (71)
- Part of a Book (47)
- Conference Object (25)
- Working Paper (20)
- Book (8)
- Contribution to Periodical (8)
- Doctoral Thesis (3)
- Periodical Part (3)
Language
- English (257) (remove)
Division
- Stoffströme und Ressourcenmanagement (257) (remove)
This paper reviews the current EU policy framework in view of its impact on hydrogen and fuel cell development. It screens EU energy policies, EU regulatory policies and EU spending policies. Key questions addressed are as follows: to what extent is the current policy framework conducive to hydrogen and fuel cell development? What barriers and inconsistencies can be identified? How can policies potentially promote hydrogen and fuel cells in Europe, taking into account the complex evolution of such a potentially disruptive technology? How should the EU policy framework be reformed in view of a strengthened and more coherent approach towards full deployment, taking into account recent technology-support activities? This paper concludes that the current EU policy framework does not hinder hydrogen development. Yet it does not constitute a strong push factor either. EU energy policies have the strongest impact on hydrogen and fuel cell development even though their potential is still underexploited. Regulatory policies have a weak but positive impact on hydrogen. EU spending policies show some inconsistencies. However, the large-scale market development of hydrogen and fuel cells will require a new policy approach which comprises technology-specific support as well as a supportive policy framework with a special regional dimension.
A model of the use of the platinum group metals (PGMs) platinum, palladium, and rhodium in Europe has been developed and combined with a model of the environmental pressures related to PGM production. Compared to the base case presented in Part I of this pair of articles, potential changes in PGM production and use are quantified with regard to cumulative and yearly environmental impacts and PGM resource use, for the period 2005–2020. Reducing sulfur dioxide (SO2) emissions of PGM producer Norilsk Nickel could cut the cumulative SO2 emissions associated with the use of PGMs in Europe by 35%. Cleaner electricity generation in South Africa could reduce cumulative SO2 emissions by another 9%. Increasing the recycling rate of end-of-life catalytic converters to 70% in 2020 could save 15% of the cumulative primary PGM input into car catalysts and 10% of the SO2 emissions associated with PGM production. In 2020, PGM requirements and SO2 emissions would be, respectively, 40% and 22% lower than the base case. Substituting palladium for part of the platinum in diesel catalysts, coupled with a probable palladium price increase, could imply 15% more cumulative SO2 emissions if recycling rates do not increase. A future large-scale introduction of fuel cell vehicles would require technological improvements to significantly reduce the PGM content of the fuel cell stack. The basic design of such vehicles greatly influences the vehicle power, a key parameter in determining the total PGM requirement.
In this article, we analyze flows of the platinum group metals (PGMs) platinum, palladium, and rhodium and the environmental impacts associated with their supply in Europe. A model of the use of PGMs in Europe has been developed, and this is combined with a model of environmental pressures related to PGM production. Seven industrial sectors and product groups form the main users of PGMs in Europe, comprising the chemical, petroleum, and glass industries; jewelry, dentistry, electronic equipment, and car catalysts. Most relevant environmental impacts of secondary production in Europe and primary PGM production in South Africa, Russia, and Canada are taken into account, including emissions of sulphur dioxide and carbon dioxide and total material requirement. The article quantifies the PGM flows to, from, and within Europe in 2004. The automotive industry is the single largest user of primary PGMs, and catalytic converters represent the major PGM end use. The chemical and glass industries also require large amounts of PGM but rely mostly on secondary metals. The environmental impacts of primary production exceed those of secondary production by far. An analysis of the use of car catalytic converters shows that as a result of efforts to reduce air pollutant emissions in Europe, other negative environmental impacts, such as point-source pollution and mining waste, are occurring elsewhere - for example, at extraction and refining sites in Siberia and South Africa.
Life Cycle Assessment (LCA) has matured over the past decades and become part of the broader field of sustainability assessment. To strengthen LCA as a tool and eventually increase its usefulness for sustainability decision-making, it is argued that there is a need to expand the ISO LCA framework by integration and connection with other concepts and methods. This paper explores the potential options for deepening and broadening the LCA methodologies beyond the current ISO framework for improved sustainability analysis. By investigating several environmental, economic and social assessment methods, the paper suggests some options for incorporating (parts of) other methods or combining with other methods for broadening and deepening the LCA.
The Low Carbon Future Cities (LCFC) project aims at facing a three dimensional challenge by developing an integrated city roadmap balancing: low carbon development, gains in resource efficiency and adaptation to climate change. The paper gives an overview of the first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi - the Chinese pilot city for the LCFC project. As a first step, a detailed emission inventory following the IPCC guidelines for Wuxi has been carried out. In a second step, the future development of energy demand and related CO2 emissions in 2050 were simulated in a current policy scenario (CPS). In parallel, selected aspects of material and water flows for the energy and the building sector were analyzed and modeled. In addition, recent and future climate impacts and vulnerability were investigated. Based on these findings, nine key sectors with high relevance to the three dimensions could be identified. Although Wuxi's government has started a path to implement a low carbon plan, the first results show that, for the shift towards a sustainable low carbon development, more ambitious steps need to be taken in order to overcome the challenges faced.
Increasing urbanisation and climate change belong to the greatest challenges of the 21st century. A high share of global greenhouse gas emissions are estimated to originate in urban areas (40 % to 78 % according to UN Habitat 2010). Therefore, low carbon city strategies and concepts implicate large greenhouse gas (GHG) mitigation potentials. At the same time, with high population and infrastructure densities as well as concentrated economic activities, cities are particularly vulnerable to the impacts of climate change and need to adapt. Scarce natural resources further constrain the leeway for long-term, sustainable urban development. The Low Carbon Future Cities (LCFC) project aims at tapping this three-dimensional challenge and will develop an integrated strategy / roadmap, balancing low carbon development, gains in resource efficiency and adaptation to climate change. The study focuses on two pilot regions - one in China (Wuxi) and one in Germany (Düsseldorf+) - and is conducted by a German-Chinese research team supported by the German Stiftung Mercator. The paper gives an overview of first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi. The project developed an emission inventory for Wuxi to identify key sectors for further analysis and low carbon scenarios. The future development of energy demand and related CO2 emissions in 2030 were simulated in the current policy scenario (CPS), using five different sub-models. Selected aspects of Wuxi's current material and water flows were analysed and modelled for energy transformation and the building sector. Current and future climate impacts and vulnerability were investigated. Recent climatic changes and resulting damages were analysed, expected changes in temperature and precipitation in the coming four decades were projected using ensembles of three General Circulation Models. Although Wuxi's government started a path to implement a low carbon plan, the first results show that more ambitious efforts are needed to overcome the challenges faced.
The paper reflects the hypothesis that those technological and institutional innovations survive which extend the safe operating range (SOR) of the Humans-Technologies-Institutions (HTI) system (e.g. companies, cities, regions and countries). The multidimensional SOR of a country comprises in particular safe livelihood, quality of life, security, monetary stability, supply security and quality of the environment. A "mechanism of progress" is described involving the search for higher safety and independence of constraints. With innovation and learning in a key role, the mechanism leads to a relative decoupling of resource use and economic value added and a growing share of knowledge generation in the economy. Competition of HTI systems for scarce resources may lead to independence strategies such as enhanced resource efficiency. It may also lead to cooperation of competing HTI systems facilitated by new institutions thus forming an HTI system at higher level of complexity. While the consortium could coordinate their resource consumption within the boundaries of safe operating space, the partner HTI systems would further expand their SOR. Data is provided that net resource importing countries have developed higher material productivity thus increasing their independence from resource supply, and countries with such capability have gained higher innovation capacity.
Defining the prevention of waste as top priority of the waste hierarchy - as confirmed by the revised Waste Framework Directive (WFD) - is much more than a simple amendment of ways to deal with waste, but means nothing less than a fundamental change of the socio-technical system of waste infrastructures and requires a transition from end-of-pipe technologies towards an integrated management of resources. The WFD therefore obligates member states to develop national waste prevention programs as a new policy instrument with the development of waste prevention indicators as one of the core elements. The article discusses the limitations of waste-based key figures and shows the need for more process-oriented indicators. As part of the development of national waste prevention programs such indicators reveal the relevance of different barriers that have to be overcome in order to make prevention an effective top priority in the waste hierarchy. With regard to path dependencies caused by sunk costs in end-of-pipe waste infrastructures the absolute amount of integrated environmental investments, as well as their share of the total waste-related investments, can be seen as indicators for the level of innovation activities aimed at waste prevention. Sector-specific indicators for the production phase could be used as benchmarks and to highlight differences in the need for policy interventions.
National policies for resource efficiency and waste management : structures, impacts, and deficits
(2015)
This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.
The paper aims to shed light on the methodological challenges of GHG monitoring at local level and to give an overview on current practices. Questions addressed are as follows: How do the methodologies which underlie different GHG inventory tools differ? What are the critical variables explaining differences between inventories? Can different GHG inventory tools be compatible - and/or interoperable - and under which conditions? The first section discusses methodological challenges related to the formation of local GHG inventories. Rather than giving a comprehensive overview on methodological problems, this section mainly highlights some of the central methodological challenges posed by local GHG inventories. This overview identifies critical variables and clarifies concepts that are necessary for the understanding of the subsequent analysis. In section two, some of the most advanced GHG inventory tools are analysed and the most important differences between these tools are highlighted. The paper concludes that the methodologies are not consistent. Local GHG inventories can thus hardly be compared. The paper gives research and policy recommendations towards greater comparability and sketches the requirements of an international protocol on urban GHG inventories.
Policies for Sustainable Use and economy-wide Management of natural Resources (SUMR) throughout the production and consumption system are faced with environmental and socio-economic requirements and regulatory constraints. Based on empirical findings of ongoing trends of resource use, decoupling from economic growth, and transregional problem shifting, the paper outlines a potentially sustainable biophysical basis for production and consumption in the EU. It discusses the main challenges for the major resource groups, describing the specific and the common tasks with regard to biomass, fossil fuels, metals, non-metallic minerals. Adopting a medical metaphor, it suggests that policies for SUMR should follow a dual approach reflecting the long-term need for a main cure of the socio-industrial metabolism in form of a "conditioning" towards a more mature, resource efficient, and renewables based constitution on the one hand, and a fine tuning of selected material flows (e.g. for optimized recycling and control of hazardous compounds) on the other hand. Both strategies are deemed complementary and necessary to reduce environmental impacts and increase the utility of material use. Action required is exemplified with regard to the three pillars of SUMR, i.e. improved orientation, information and incentives.
Improving material efficiency in the manufacturing industry is a sustainability imperative for companies due to economic and environmental advantages such as the reduction of material costs and resource use. Innovative solutions in terms of material efficiency measures are diverse and widespread. As a systematic assessment of efficiency approaches and their effects are likely to support dissemination and deployment, this paper aims to develop an approach that helps to classify material efficiency measures. The classification approach presents different dimensions and properties of material efficiency measures based on a literature analysis regarding existing classification approaches as well as on work that has been conducted for the Eco-Innovation Observatory. The classification has been designed as basis for an empirical impact assessment of material efficiency measures based on a data sample that stems from the German Material Efficiency Agency.
World primary copper production is expected to increase due to growing demand. Reflecting the geographical divergence of copper deposits and demanding industries, copper is produced by various production paths, differing in regional and technological aspects and related environmental pressures. For the mitigation of environmental pressures related to global material flows and a more sustainable resource management, policy makers, producers and buyers require information on regional resource efficiencies and effects of the key processes within the global production chain. This study quantifies material flows of refined copper production and environmental pressures along the pyro‐ and hydrometallurgical paths for Chile and Germany. Inventories for involved unit processes are distinguished by region and most commonly applied technologies, including electric power supply. Different production paths are compared by environmental pressure indicators (primary energy requirements, total material requirements, water consumption, GHG emissions, solid waste disposal, sulphur dioxide and arsenic emissions). Alternative options for improvement of technologies and supply patterns in Chile and Germany are compared.
A desirable future critically depends on our ability to ensure the supply of key resources while simultaneously respecting planetary boundaries. This paper looks at the potential implications of living within the "safe operating space" for people, business and the economy. It develops a positive vision of the future based on three pillars: a safe and fair use of global resources, a sustainable society, and a transformed economy. We review and build on recent sustainability visions to develop a holistic reflection on what life in 2050 could look like, and explore the key changes in the economy needed to get there. In particular we show that resource efficiency requires a systemic shift in values, innovation, governance and management regimes. We present a bold vision for Europe underlined by indicators and targets, explore transition challenges to getting there and conclude with a list of key policies needed for overcoming challenges and reaching the vision.
Leasing society : study
(2012)
Natural resources are back on the agenda. After the rise of new economic powers such as China, India, and Brazil, global competition has perceptibly increased strategic concerns as regards high commodity prices and possible supply shortages. Germany, the EU, the United States, and many others have formulated raw material strategies that put concern over access and supply at center stage - but the environmental and the socio-political dimensions are widely neglected in these strategies. This paper underlines a new dimension of international relations and pleads for new approaches, called international resource politics, which can be used for ongoing debates concerning green economy and transition strategies.
This paper undertakes a step to explaining the international economics of resource productivity. It argues that natural resources are back on the agenda for four reasons: the demand on world markets continues to increase, the environmental constraints to using resources are relevant throughout their whole life cycle, the access to critical metals could become a barrier to the low carbon economy, and uneven patterns of use will probably become a source of resource conflicts. Thus, the issue is also of relevance for the transition to a low carbon economy. "Material Flow Analysis" is introduced as a tool to measure the use of natural resources within economies and internationally; such measurement methodology now is being harmonized under OECD auspices. For these reasons, the paper argues that resource productivity - that is the efficiency of using natural resources to produce goods and services in the economy - will become one of the key determinants of economic success and human well-being. An empirical chapter gives evidence on time series of resource productivity increases across a number of economies. Introducing the notion of "material flow innovation", the paper also discusses the innovation dynamics and issues of competitiveness. However, as the paper concludes, market barriers make a case for effective resource policies that should provide incentives for knowledge generation and get the prices right.
Human societies face a threatening future of resource scarcity and environmental damages. This book addresses the challenge of turning these risks into opportunities and policies. It is a collection of high level contributions from experts of sustainable growth and sustainable resource management. Focussing on economics, sustainability, technology and policy, the book highlights system innovation, leapfrogging strategies of emerging economies, possible rebound effects and international market development. It puts natural resources centre stage and will make an important contribution to achieving the goal of a 21st century Green Economy.
Resource flows constitute the materials basis of the economy. At the same time, they carry and induce an environmental burden associated with resource extraction and the subsequent material flows and stocks, which finally end up as waste and emissions. A reduction of this material throughput and the related impacts would require a reduction of resource inputs. And breaking the link between resource consumption and economicgrowth would require an increase in resource productivity. Material flow analysis (MFA) can be used to quantify resource flows and indicate resource productivity. In this article, we study the available empirical evidence on the actual (de-)linkage of material resource use and economic growth. We compare resource use with respect to total material requirement (TMR) and direct material input (DMI) for 11 and 26 countries, respectively, and the European Union (EU-15). The dynamics of TMR, as well as of the main components are analysed in relation to economic growth in order to show whether there is a decoupling (relative or absolute) from GDP and a change of the metabolic structure in the course of economicdevelopment. DMI/cap so far only decoupled from GDP/cap in relative terms; that is, in most countries, it reached a rather constant level but - with the exception of Czech Republic - showed no absolute decline yet. TMR/cap was reduced in two high-income countries and one low-income country due to political influence. Changes in TMR were more influenced by hidden flows (HF) than by DMI. We analyse the dynamics of the structure and composition of TMR in the course of economic development. In general, the economic development of industrial countries was accompanied by a shift from domestic to foreign resource extraction. Different relations can be discovered for the share of biomass, fossil fuel resources, construction resources and metals and industrial minerals.
Integrated systems analysis
(2007)
This article addresses informational barriers to energy efficiency. It is a widely acknowledged result that an energy efficiency gap exists implying that the level of energy efficiency is at an inefficiently low level. Several barriers to energy efficiency create this gap and the presence of asymmetric information is likely to be one such barrier. The article finds that problems of moral hazard and adverse selection indeed can help explain the seemingly low levels of energy efficiency. The theory reveals two implications to policies on energy efficiency. First, the development of measures to enable contractual parties to base remuneration on energy performance must be enhanced, and second, the information on technologies and the education of consumers and installers on energy efficiency must be increased. Finally, it is found that the preferred EU policy instrument on energy efficiency, so far, seems to be the use of minimum requirements. Less used in EU legislation is the use of measuring and verification as well as the use of certifications. Therefore, it is concluded that the EU should consider an increased use of these instruments.
In early September 2014, about 4.000 scientists, activists and artists at the 4th International Conference on Degrowth sent out two messages.
1. Industrialized societies will change, either by disaster or by design. Accelerated resource exploitation and climate change can force societies into a transition. Or they swiftly develop new forms of economic, political and social organization which respect the planetary boundaries.
2. "Degrowth" has become a new social movement which translates scientific insights into cultural change, political change and social practice. Hence, the conference itself was an experiment on the potentials and limits of share economy, commoning and sufficiency.
A team of young scholars and activists from different German research institutes and non-govern- mental organisations prepared the conference. The team of the Wuppertal Institute was partly involved in the preperation of the conference. Scientists from all research groups took part in the conference, presenting and discussing project results.
The publication is a collection of contributions of the Wuppertal Institute to the conference and covers pivotal issues of the degrowth-debate: indicator development (Freyling & Schepelmann), working time reduction (Buhl), feminist theory (Biesecker & Winterfeld), and urban transition (Best).
This article proposes a policy framework for analysing corporate governance toward sustainable development. The aim is to set up a framework for analysing market evolution toward sustainability. In the first section, the paper briefly refers to recent theories about both market and government failures that express scepticism about the way that framework conditions for market actors are set. For this reason, multi-layered governance structures seem advantageous if new solutions are to be developed in policy areas concerned with long-term change and stepwise internalisation of externalities. The paper introduces the principle of regulated self-regulation. With regard to corporate actors| interests, it presents recent insights from theories about the knowledge-based firm, where the creation of new knowledge is based on the absorption of societal views. The result is greater scope for the endogenous internalisation of externalities, which leads to a variety of new and different corporate strategies. Because governance has to set incentives for quite a diverse set of actors in their daily operations, the paper finally discusses innovation-inducing regulation. In both areas, regulated self-regulation and innovation-inducing regulation, corporate and political governance co-evolve. The paper concludes that these co-evolutionary mechanisms may assume some of the stabilising and orientating functions previously exercised by framing activities of the state. In such a view, the government's main function is to facilitate learning processes, thus departing from the state's function as known from welfare economics.
This paper examines the connection between globalisation, with its growth in world trade links, and certain ecological effects especially concerning "North-South" relations. Although world trade in the mid-nineties was significantly uncoupled from growth trends in the world economy, so that since then it has increased nearly three times faster than the global GDP, certain indicators of energy use and CO2 emissions have not developed proportionately to world trade; globalisation evidently does not lead to a situation where pressures on the environment are increasing to the same extent worldwide. This de-linking may, however, result in the kind of shifts that we examine here with reference to the material trade flows of the European Union. It will be shown that, in the course of globalisation, the countries of the EU have increasingly shifted environmental burdens on to the countries of the South, especially in the form of ecological rucksacks of imported raw materials, while at the same time reducing the pressure on their own domestic environment by extracting fewer material resources. Furthermore, goods whose production places intensive pressure on the environment (industrial emissions into the atmosphere and water, heavy metal emissions, etc.) have been increasingly imported from newly industrializing or developing countries. The greater covering of material requirements from foreign resources has served not so much the EU's internal consumption as its own production of export goods; this shows that the EU has an increasing share in the resource requirement of other economies. The paper concludes that it is absolutely necessary to consider the international dimension in any strategy for more productive use of resources in industrial countries. In the long term, the EU's resource use should also be reduced in absolute terms. This will also be necessary in order to reduce the pressure on the environment due to imports and exports.
Measuring progress towards sustainable development requires appropriate frameworks and databases. The System of Environmental-Economic Accounts (SEEA) is undergoing continuous refinement with these objectives in mind. In SEEA, there is a need for databases to encompass the global dimension of societal metabolism. In this paper, we focus on the latest effort to construct a global multi-regional input-output database (EXIOBASE) with a focus on environmentally relevant activities. The database and its broader analytical framework allows for the as yet most detailed insight into the production-related impacts and "footprints" of our consumption. We explore the methods used to arrive at the database, and some key relationships extracted from the database.
Global resource management : conflict potential and characteristics of a global governance regime
(2007)
The global land area required to meet the German consumption of agricultural products for food and non-food use was quantified, and the related greenhouse gas (GHG) emissions, particularly those induced by land-use changes in tropical countries, were estimated. Two comprehensive business-as-usual scenarios describe the development corridor of biomass for non-food use in terms of energetic and non-energetic purposes. In terms of land use, Germany was already a net importer of agricultural land in 2004, and the net additional land required by 2030 is estimated to comprise 2.5–3.4 Mha. This is mainly due to biofuel demand driven by current policy targets. Meeting the required biodiesel import demand would result in an additional GWP of 23–37 Tg of CO2 equivalents through direct and indirect land-use changes. Alternative scenario elements outline the potential options for reducing Germany's land requirement, which reflect future global per capita availability.
This article introduces elements of a global governance regime for sustainable resource management. It argues that such an approach is needed to combat the negative impacts arising from resource extraction and use as well as to overcome the co‐ordination problems of decentralized action. A first section summarizes main conflicts arising from limited access to natural resources and security of supply, environmental impacts and the performance of resource‐rich developing countries. A second section analyses existing initiatives for sustainable resource management such as resource funds, efforts to increase transparency, programmes in development co‐operation, standards and certification, material efficiency and resource productivity as well as efforts to limit the consumption of natural resources. Though these initiative have their merits, the article concludes that more systematic institutional mechanisms are needed. The third section introduces those institutional mechanisms: it describes the International Panel for Sustainable Resource Management (launched in November 2007), outlines elements of an international convention on sustainable resource management, develops the agenda for an international agency on the issue and discusses the interaction with existing international bodies such as the World Trade Organization. Written as a policy paper, the paper formulates proposals for various actors, from small‐scale miners to large‐scale global companies and governments. Its intention is to stimulate the debate and to broaden the horizon on the global dimension of using minerals.
Biodiversity loss is widely recognized as a serious global environmental change process. While large-scale metal mining activities do not belong to the top drivers of such change, these operations exert or may intensify pressures on biodiversity by adversely changing habitats, directly and indirectly, at local and regional scales. So far, analyses of global spatial dynamics of mining and its burden on biodiversity focused on the overlap between mines and protected areas or areas of high value for conservation. However, it is less clear how operating metal mines are globally exerting pressure on zones of different biodiversity richness; a similar gap exists for unmined but known mineral deposits. By using vascular plants' diversity as a proxy to quantify overall biodiversity, this study provides a first examination of the global spatial distribution of mines and deposits for five key metals across different biodiversity zones. The results indicate that mines and deposits are not randomly distributed, but concentrated within intermediate and high diversity zones, especially bauxite and silver. In contrast, iron, gold, and copper mines and deposits are closer to a more proportional distribution while showing a high concentration in the intermediate biodiversity zone. Considering the five metals together, 63% and 61% of available mines and deposits, respectively, are located in intermediate diversity zones, comprising 52% of the global land terrestrial surface. 23% of mines and 20% of ore deposits are located in areas of high plant diversity, covering 17% of the land. 13% of mines and 19% of deposits are in areas of low plant diversity, comprising 31% of the land surface. Thus, there seems to be potential for opening new mines in areas of low biodiversity in the future.
The rising global demand for metals in a context of declining ore grades is driving the opening of new mines and the expansion of existing ones, disturbing substantial land areas (especially by open pits). However, how much land is currently disturbed globally? How much land could be disturbed by metal mining in 2050? This study investigates the global area disturbed by mining of iron, bauxite, copper, gold, and silver for the first time. The first part consists of the calculation of the specific land requirements, i.e. the area newly disturbed caused by the ore extraction at the mine site. The second part addresses the global area disturbed in the year 2011 whereas the third presents scenarios of how such area might evolve until 2050. The last part addresses the current and future pressures on global biodiversity by metal mines and shows possibilities for the future opening of new mines in low biodiversity areas, alleviating pressures in high biodiversity ones. This study presents the findings of the author´s dissertation hoping they are used as a frame to develop policies and incentives to reduce the amount of area directly disturbed by mines and their pressures on biodiversity.
Fossil independence and substantial reductions in CO2 emissions seem to be possible with 2nd generation biofuels. New technologies allow a full carbon-to-fuel conversion of non-edible plant parts such as straw or wood, and the cultivation of algae or salt-resistant plants uncouples bioenergy from food production. Nevertheless, impacts on biodiversity, global land and water use are widely unclear and their competitiveness with 1st generation biofuels and electric mobility is an open question. An interdisciplinary team of Empa, University of Zurich and the Wuppertal Institute of Climate, Environment and Energy evaluated the most sustainable production techniques and assessed their potential for our future mobility.
Northrhine-Westphalia (NRW) is the largest land of the Federal Republic of Germany. Until the 1970ies the Ruhr-area with a population of about 12 million people and a strong coal, steel and chemical industry had been plagued with severe pollution. In the 1970ies environmental protection had emerged on the international and national policy agendas. The federal and regional government launched massive legislative and economic public interventions for cleaning-up rivers, soils and air. As a result, a highly competitive eco-industry emerged. The article outlines main features of ecoindustries, the structural change of the Ruhr area and regional economic cluster policies in support of eco-industries in NRW. It draws conclusions for eco-industry policy developing from end-of-pipe towards integrated preventive approaches.
EXIOPOL (A New Environmental Accounting Framework Using Externality Data and Input–Output Tools for Policy Analysis) was a European Union (EU)-funded project creating a detailed, global, multiregional environmentally extended Supply and Use table (MR EE SUT) of 43 countries, 129 sectors, 80 resources, and 40 emissions. We sourced primary SUT and input–output tables from Eurostat and non-EU statistical offices. We harmonized and detailed them using auxiliary national accounts data and co-efficient matrices. Imports were allocated to countries of exports using United Nations Commodity Trade Statistics Database trade shares. Optimization procedures removed imbalances in these detailing and trade linking steps. Environmental extensions were added from various sources. We calculated the EU footprint of final consumption with resulting MR EE SUT. EU policies focus mainly on energy and carbon footprints. We show that the EU land, water, and material footprint abroad is much more relevant, and should be prioritized in the EU's environmental product and trade policies.
A lack of proper treatment infrastructure and sufficient capacity for municipal solid waste (MSW) treatment is a crucial barrier for the environmentally sound management of waste. However, overcapacities, especially for waste incineration, also have to be taken into account regarding their potential impacts on recycling markets and waste treatment prices. This paper provides a comprehensive overview of existing MSW incineration plants and their capacities within Europe. In combination with the analysis of imports and exports of MSW for incineration, it provides an indication of over- and undercapacities for incineration plants. Among other things, the results show that in six of the 32 countries analysed in this study, capacities exceed more than 50% of the annual waste generation, while in two countries the total amount of waste generated annually is not enough to fill all the incineration plants.
Europe in transition : paving the way to a green economy through eco-innovation ; annual report 2012
(2013)
This chapter is an excerpt from a study commissioned by the European Parliament, which examines EU subsidies for agriculture, fisheries, transport, energy and regional development. Based on proven methodologies for the identification and assessment of environmentally harmful subsidies, the study assesses the sustainability level of the sectoral policies and makes recommendations for a reform that would contribute to the alignment of the EU budget towards a more sustainable growth. The following sections provide the main findings of one of the largest fields of expenditure within the EU budget, the structural and cohesion policy.
In a German case study, environmental input-output analyses (eIOA) combined with NAMEA-type tables were conducted for eleven selected environmental pressure variables. (NAMEA is an acronym for national accounts matrix including environmental accounts.) The analyses were conducted to derive the production-cycle-wide resource use and environmental impact potentials of final-demand product groups. The methodology permits identification and preliminary ranking of 10 product chains along which about two-thirds of German production-born environmental pressures arise. The most relevant product groups are construction work, food, motor vehicles, basic metals, and electricity. The ten product groups are characterized by both high resource requirements and high residual outputs (air emissions, wastes). The EU policy areas of integrated product policy and sustainable use of natural resources may address these product chains as a priority in order to identify and explore the possibility of reducing the environmental impacts from products throughout their life cycles and to decouple environmental impacts from resource use.
Carbon recycling, in which organic waste is recycled into chemical feedstock for material production, may provide benefits in resource efficiency and a more cyclical economy - but may also create "trade-offs" in increased impacts elsewhere. We investigate the system-wide environmental burdens and cost associated with carbon recycling routes capable of converting municipal solid waste (MSW) by gasification and Fischer-Tropsch synthesis into ethylene. Results are compared to business-as-usual (BAU) cases in which ethylene is derived from fossil resources and waste is either landfilled with methane and energy recovery (BAU#1) or incinerated (BAU#2) with energy recovery. Monte Carlo and sensitivity analysis is used to assess uncertainties of the results. Results indicate that carbon recycling may lead to a reduction in cumulative energy demand (CED), total material requirement (TMR), and acidification, when compared to BAU#1. Global warming potential is found to be similar or slightly lower than BAU#1 and BAU#2. In comparison to BAU#2, carbon recycling results in higher CED, TMR, acidification, and smog potential, mainly as a result of larger (fossil-based) energy offsets from energy recovery. However, if a renewable power mix (envisioned for the future) is assumed to be offset, BAU#2 impacts may be similar or higher than carbon recycling routes. Production cost per kilogram (kg) MSW-derived ethylene range between US$1.85 and US$2.06 (Jan 2011 US$). This compares to US$1.17 per kg for fossil-based ethylene. Waste-derived ethylene breaks even with its fossil-based counterpart at a tipping fee of roughly US$42 per metric ton of waste feedstock.
The book contains the proceedings of INFER annual conference 2004, organized at the Wuppertal Institute in Germany. Within the area of environmental economics, methodological issues now seem at stake. This is because recent methods and fields of economics, like institutional economics, competition (industrial) economics, and cognitive economics, should be applied and become more established within environmental economics. The different papers address this challenge via different case studies in areas such as agriculture, biodiversity, eco-taxes, subsidies, wind energy, environmental corruption, governance, contracts, international trade, human behavior, and many others.
Emscher 3.0 : from grey to blue - or, how the blue sky over the Ruhr region fell into the Emscher
(2013)
The river Emscher is - similar to the river Ruhr - the symbol of one of the internationally most renowned industrial regions: the Ruhr area with its 5 million inhabitants and an important location of key industries such as steel, chemical and materials industry. The revitalisation of the Emscher over the last 20 years marks a new phase in the region's history and is an impressive example of ecological and socio-economic transformation affecting all aspects of life along the river. What can we learn from the Emscher conversion for upcoming tasks in other infrastructure fields?
Economy-wide material flows
(2010)
Material flows induced by national economies can be regarded as indirect pressure indicators for environmental degradation. Economy-wide material flow analysis and indicators have been designed to monitor material and energy flows at the macroeconomic level and to provide indicators, which could contribute to management of resourceuse and output emission flows from both economic, environmental and broader sustainability points of view. These indicators can serve various purposes including monitoring the material basis of national economies and related environmental pressures, assessment of the material and resource productivity and monitoring the implications of trade and globalisation.
The main part of this paper compares the material and resourceuse of the Czech Republic, Germany and the EU-15 by means of DMI and TMR indicators over the period of 1991–2004 (1991–2000 for EU-15). At the aggregate level both indicators in all three economies do not show any clear decreasing or increasing trends over the period considered. This means that environmental pressure related to use of materials for production and consumption purposes remains rather stable. All the economies however, recorded an increase in the efficiency of transforming the material/resource inputs into economic output. The analysis further revealed that most of the dynamics of DMI and TMR in the Czech Republic tended towards a higher similarity with Germany and the EU-15. In the future, further decreases in DMI as well as in TMR of fossils fuels might be expected in the Czech Republic, which could be counteracted by increase in DMI and TMR of metal ores/metal resources and non-metallic minerals/non-metallic resources. The future development of total DMI, TMR and material/resource intensity in both the Czech Republic and Germany will depend on further shifts to less material intensive industries and services and on increasing material efficiency in production and consumption of particular products. This is not only a technological, but also a social challenge, as there are barriers in current mode of governance and in shaping of current economic and social systems to do so.
Several studies in Germany aimed at the development of a sound database on existing waste prevention measures by public bodies at the local, regional and federal levels. These results are the starting point for the creation of a national prevention program, which has to be presented by all European Member States until the end of 2013 - due to the revised European Waste Framework Directive. Based on this empirical foundation, this paper draws conclusions with regard to drivers and barriers for eco-innovations in the field of waste prevention. The analysis shows that an optimized adaptation of information on waste prevention to the needs of specific target groups is still missing but could be a relevant driver. With regard to barriers the results of the study show that waste prevention is by no means always a win–win-situation. Institutional frameworks are missing to coordinate the different interests and for the exchange of experiences that could help to realize learning effects regarding innovation approaches.