Refine
Year of Publication
Document Type
- Report (11)
- Peer-Reviewed Article (4)
Language
- English (15) (remove)
Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.
The environmental impacts of mobile computing : a case study with HP ; final report ; Digital Europe
(2003)
This report includes the results and calculations of the HP case study within the Digital Europe project. This case study investigates the environmental effects of mobile computing devices as an element of the growing ICT infrastructure for applications such as ecommerce, egovernment and telework. Specifically, the resource intensity of a notebook computer and a handheld device will be analysed and discussed.
This report presents the findings and recommendations of the EMI case study undertaken as part of the Digital Europe project. Chapter 2 sets out the background to the case study; chapter 3 investigates the environmental impacts of digital music; and chapter 4 highlights the social impacts of digital music. Chapter 5 outlines future scenarios for the sector and chapter 6 draws recommendations for business and government.
Resource-efficient construction : the role of eco-innovation for the construction sector in Europe
(2011)
This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.
Life Cycle Assessment (LCA) has matured over the past decades and become part of the broader field of sustainability assessment. To strengthen LCA as a tool and eventually increase its usefulness for sustainability decision-making, it is argued that there is a need to expand the ISO LCA framework by integration and connection with other concepts and methods. This paper explores the potential options for deepening and broadening the LCA methodologies beyond the current ISO framework for improved sustainability analysis. By investigating several environmental, economic and social assessment methods, the paper suggests some options for incorporating (parts of) other methods or combining with other methods for broadening and deepening the LCA.
This manual sets out to be an instruction guide for the implementation of analyses according to the MIPS concept. MIPS stands for Material Input Per Service unit, a measure developed at the Wuppertal Institute, which serves as an indicator of precautionary environmental protection. However, this publication is not a comprehensive description of the methods used, but should rather be seen as supplementing existing publications, in particular, the MAIA Handbook. This practical guide contains additional information, which cannot be part of a methodological description, but which is indispensable for the practical work. This manual is directed at enterprises and persons, who wish to carry out MIPS or a material analysis in relation to products or services. It gives a general impression of what MIPS is, and how MIPS is calculated.
Calculating MIPS 2.0
(2013)
The Wuppertal Institute developed, in the early 1990s, an input-oriented lifecycle-wide resource accounting method, the "Material Input per Service-Unit" concept (MIPS), today also referred to as "Material Footprint". The official handbook applicable to products, services, and processes describes a MS Excel-based sequential approach for calculating MIPS. Today's computing power, available to every researcher, and access to software and databases dedicated to lifecycle analysis make calculating MIPS using matrix inversion possible. This also opens up possibilities for enhancing MIPS-models programmatically: parameterizing the foreground and background systems, batch modeling for producing time series, and computational algorithms enhancing interpretation. The article provides (1) an overview of the methods and tools used for calculating MIPS from its origins to today, and (2) demonstrates some of the programmatically enhanced capabilities offered to MIPS-practitioners.
The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.