Refine
Year of Publication
- 2020 (71) (remove)
Document Type
- Peer-Reviewed Article (37)
- Report (12)
- Conference Object (8)
- Part of a Book (6)
- Contribution to Periodical (3)
- Working Paper (3)
- Master Thesis (2)
Language
- English (71) (remove)
D2.1 report on local EPC situation and cross-country comparison matrix : QualDeEPC H2020 project
(2020)
Considering that 40% of the European Union's energy consumption can be traced back to its buildings, it is essential to improve their energy efficiency in order to achieve the EU's energy efficiency targets. Both the rate of energy renovation and its depth, i.e. the amount of energy savings during a renovation, need to be improved. Energy Performance Certificates (EPC), regulated by the EU's Energy Performance of Buildings Directive (EPBD), are an important instrument to enhance the market uptake of energy-efficient new buildings and the energy-efficient renovation of existing buildings.
Against this background, the Horizon2020 funded project QualDeEPC will work on EU-wide convergence of the building assessment and the issuance, design, and use of quality-enhanced EPCs as well as their recommendations for building renovation. The aim is to make these recommendations coherent with deep energy renovation towards a nearly-zero energy building stock by 2050.
The first part of the QualDeEPC project (work package 2) aims to identify the priorities for elements of EPC schemes that show a need to be improved, and for which the project will investigate further and propose how the elements can be improved. The first step in identifying these priorities is taking stock of the existing EPC schemes. Based on the input from all national consortium partners and other sources, the Wuppertal Institute prepared this detailed overview of the country-specific EPC assessment and certification procedures and their links to other policies and programmes, existing initiatives, and projects. The analysis was based on a list of almost 50 potential options for enhancing the existing EPC schemes.
The aim of this deliverable is to present this stock-taking by a detailed analysis on which of the potential enhanced EPC elements are already implemented in which form in which country, covering all 28 countries that were EU member states until 31 January 2020. All partners conducted bilateral interviews with the major actors in the EPC procedures, including executive bodies on EPC at regional and/or national level. For countries not represented in the Consortium, Wuppertal Institut and EAP conducted specific literature research, e.g. from the Concerted Action EPBD, and aimed to obtain contributions from other member states. The information collected allows a detailed presentation on the elements implemented as well as a cross-country comparison matrix (see Annex I) in this report, which outlines the current EPC practices across the EU regarding the elements of a good practice scheme or innovative improvement options, their comparability, compliance with EU legislation, and to which extent they differ or converge.
The results show, once more, the high diversity in EPC schemes across the EU. They also provide useful information in at least two directions: 1) which improvement options are not yet implemented at all or in sufficient quality in most QualDeEPC partner countries as well as other EU member states, and could therefore be interesting candidates for the further work of the QualDeEPC project in development, testing, discussion, and possibly implementation of elements for enhanced and converging EPC schemes; and 2) which countries, within or beyond the QualDeEPC project, offer good practice examples for the implementation of these options that could serve to guide the development and implementation in other countries. This deliverable will thus serve as a basis for the upcoming tasks to develop priorities and actual proposals for improvement of EPC schemes.
CICERONE aims to bring national, regional and local governments together to jointly tackle the circular economy transition needed to reach net-zero carbon emissions and meet the targets set in the Paris Agreement and EU Green Deal. This document represents one of the key outcomes of the project: a Strategic Research & Innovation Agenda (SRIA) for Europe, to support owners and funders of circular economy programmes in aligning priorities and approaching the circular economy transition in a systemic way.
The German-Japanese Energy Transition Council (GJETC) was established in 2016 by experts from research institutions, energy policy think tanks, and practitioners in Germany and Japan.
The objectives and main activities of the Council and the supporting secretariats are to identify and analyze current and future issues regarding policy frameworks, markets, infrastructure, and technological developments in the energy transition, and to hold Council meetings to exchange ideas and propose better policies and strategies. In its second project phase (2018-2020), the GJETC had six members from academia on the Japanese side, and eight members on the German side, with one Co-Chair from each country.
From October 2018 to March 2020, the GJETC worked on and debated six topics:
1) Digitalization and the energy transition. 2) Hydrogen society. 3) Review of German and Japanese long-term energy scenarios and their evaluation mechanism. 4) Buildings, energy efficiency, heating/cooling. 5) Integration costs of renewable energies. 6) Transport and sector coupling.
The outputs and the recommendations of the second phase of the GJETC are summarized in this report.
Every diet has an impact on an individual's health status, the environment as well as on social aspects. In particular, ecological and social concerns are usually only vaguely assessed in the daily routines of out-of-home catering and a systematic sustainability assessment of meals is usually not carried out. Since May 2018, the menu calculator presented in this paper has been supporting stakeholders in various catering establishments with their sustainability assessment. The tool was developed within the NAHGAST project (www.nahgast.de) in cooperation with five practice partners and tested and validated by a total of 120 recipes. This article provides an overview of selected recipes' sustainability assessments (meals with fish and meat as well as vegetarian and vegan meals) and highlights the effects on the ecological, health and social dimensions.
Germany's eco-innovation performance has declined compared to previous reports and scores 123 against 100 of the EU average. It is still quite high with respect to the input side of eco-innovation and relatively good, i.e. above EU average concerning socio-economic and eco- innovative outputs. However, the revised eco-innovation index shows weaknesses in eco-innovation activities and environmental outcomes. All in all, Germany ranks 6 this year.
In current German debates on sustainable urbanisation and urbanism, new urban actors reviving buildings, brownfields or whole neighbourhoods are discussed as potential drivers of urban transformation towards sustainability as well as potential co-producers for conventional actors in urban development and planning. These actor's projects can be understood as spatially confined niches for experimentation with (built) urban space itself. Building upon the concepts of niche entrepreneurship (Pesch et al., 2017) and the framework of strategic action field theory (Fligstein & McAdam, 2011; 2015), we ask how these actors secure support for their projects and how these projects in turn are altered in this process. Based upon a case study from Wuppertal, Germany, we show that in struggling for support of powerful actors, these actors often have to significantly compromise, and that these compromises can be understood as contextualisation in the project's spatial and institutional environment.
Digitalisation is taking place at a fast pace in all European countries and it is transforming the economies, societies, communication, jobs and the necessary skills for the workplace and everyday life. The Covid-19 pandemic is also accelerating digitalisation at many levels.
To address the great challenges resulting from this, the European Commission has launched the Green Deal, a long-term transformation strategy towards an innovative and sustainable society. Three important initiatives under the Green Deal are the New Circular Economy Action Plan, the Biodiversity Strategy for 2030 and the Zero Pollution Action Plan. The various strategies and action plans draw up a large portfolio of measures, instruments and milestones that are always linked to digital technologies. Ideally, these are eco-innovative and sustainable and contribute to improving living conditions in Europe.
The EIO Biennial Report 2020, which looks at a different topic every two years, considers digitalisation a major opportunity to accelerate the transition to a circular Europe. In the current report, the authors provide an overview of eco-innovation trends, illustrated by digital technology and policy practices that can further drive the circular economy.
Science and education are central fields and a lever for sustainable development. With the newly developed student teaching and learning format "Transformative Innovation Lab" - TIL for short - students are to be enabled to conduct independent transformative research. To this end, the researchers, under the direction of the Wuppertal Institute, developed and tested the new learning concept in the project "Development, testing and dissemination of new qualification offers for 'change agents' for transformative learning using the real-world laboratory approach" (EEVA). The detailed results and numerous implementation tips have been published in a practical handbook aimed at academic teaching staff and other multipliers.
For some time, 3D printing has been a major buzzword of innovation in industrial production. It was considered a game changer concerning the way industrial goods are produced. There were early expectations that it might reduce the material, energy and transport intensity of value chains. However for quite a while, the main real world applications of additive manufacturing (AM) have been some rapid prototyping and the home-based production of toys made from plastics. On this limited basis, any hypotheses regarding likely impacts on industrial energy efficiency appeared to be premature. Notwithstanding the stark contrast between early hype and practical use, the diffusion of AM has evolved to an extent that at least for some applications allows for a preliminary assessment of its likely implications for energy efficiency.
Unlike many cross-cutting energy efficiency technologies, energy use of AM may vary substantially depending on industry considered and material used for processing. Moreover, AM may have much greater repercussions on other stages of value chains than conventional cross-cutting energy efficiency technologies. In case of AM with metals the following potential determinants of energy efficiency come to mind:
- A reduction of material required per unit of product and used during processing;
- Changes in the total number and spatial allocation of certain stages of the value chain; and
- End-use energy efficiency of final products.
At the same time, these various streams of impact on energy efficiency may be important drivers for the diffusion of AM with metals. This contribution takes stock of AM with metals concerning applications and processes used as well as early evidence on impacts on energy efficiency and combine this into a systematic overview. It builds on relevant literature and a case study on Wire Arc Additive Manufacturing performed within the REINVENT project.
Non-residential buildings in the European Union consume more than one third of the building sector's total. Many non-residential buildings are owned by municipalities. This paper reports about an energy saving competition that was carried out in 91 municipal buildings in eight EU member states in 2019. For each public building an energy team was formed. The energy teams' activities encompassed motivating changes in the energy use behaviour of employees and small investments. Two challenges added an element of gamification to the energy saving competition. To assess the success of the energy saving competition, an energy performance baseline was calculated using energy consumption data of each public building from previous years. Energy consumption in the competition year was monitored on a monthly base. After the competition the top energy savers from each country were determined by the percentage-based reduction of energy consumption compared to the baseline. On average, the buildings had an electricity and heat consumption in 2019 that was about 8 % and 7 %, respectively, lower than the baseline. As an additional data source for the evaluation, a survey among energy team members was conducted at the beginning and after the energy competition. Support from superiors, employee interest and motivation and behaviour change as assessed by energy team members show a positive, if weak or moderate, correlation with changes in electricity consumption, but not with changes in heat consumption.
The German Energiewende is a deliberate transformation of an established industrial economy towards a nearly CO2-free energy system accompanied by a phase out of nuclear energy. Its governance requires knowledge on how to steer the transition from the existing status quo to the target situation (transformation knowledge). The energy system is, however, a complex socio-technical system whose dynamics are influenced by behavioural and institutional aspects, which are badly represented by the dominant techno-economic scenario studies. In this paper, we therefore investigate and identify characteristics of model studies that make agent-based modelling supportive for the generation of transformation knowledge for the Energiewende. This is done by reflecting on the experiences gained from four different applications of agent-based models. In particular, we analyse whether the studies have improved our understanding of policies' impacts on the energy system, whether the knowledge derived is useful for practitioners, how valid understanding derived by the studies is, and whether the insights can be used beyond the initial case-studies. We conclude that agent-based modelling has a high potential to generate transformation knowledge, but that the design of projects in which the models are developed and used is of major importance to reap this potential. Well-informed and goal-oriented stakeholder involvement and a strong collaboration between data collection and model development are crucial.
Given that over 50% of Myanmar's urban inhabitants and nearly 75% of the rural population lack access to adequate electricity, the country's development agenda includes electrification as a key policy goal. The government's National Electrification Project (NEP) aims to reach 100% household electrification by 2030. To achieve this ambitious target, the government of Myanmar has established a set of strategic electrification priorities. The primary focus is to electrify the country through extension of the national grid and construction of large power plants based on fossil fuels and renewable energy.
For decades, decentralised energy solutions have played a niche role in Myanmar's electrification journey. Local developers have constructed thousands of nominal "mini-grids", powered by a range of sources, including water, diesel, and solar. With the support of local communities, these initiatives provide positive stimuli for the social and economic development of villages across the country. To achieve its electrification goals, the NEP includes a segment to promote the development of new mini-grids through a set of subsidies and private sector cooperation initiatives. These target remote regions, which are difficult to electrify through extension of the main grid.
This report takes an in-depth look at decentralised electrification through community-based mini-grids with a focus on renewable energy. The aim is to provide insights into the potential role of sustainable electrification and to identify both enabling and limiting factors related to the institutional and policy landscape (macro), as well as the local conditions (micro). It also aims to explore whether the cooperative model is a suitable organisational framework for the operation of mini-grids in Myanmar. The results of the study will help to inform policymakers and supporters of decentralised electrification about the potential role for cooperatives and provide ways to improve the operating environment for sustainable, community-based mini-grids.
Recent research on the natural resource use of private consumption suggests a sustainable Material Footprint of 8 tons per capita by 2050 in industrialised countries. We analyse the Material Footprint in Germany from 2015 to 2020 in order to test whether the Material Footprint decreases accordingly. We studied the Material Footprint of 113,559 users of an online footprint calculator and predicted the Material Footprint by seasonally decomposed autoregressive (STL-ARIMA) and exponential smoothing (STL-ETS) algorithms. We find a relatively stable Material Footprint for private consumption. The overall Material Footprint decreased by 0.4% per year between 2015 and 2020 on average. The predictions do not suggest that the Material Footprint of private consumption follows the reduction path of 3.3% per year that will lead to the sustainable consumption of natural resource
This paper explores how the European Commission promotes the concept of Sustainable Urban Mobility Planning (SUMP) among European cities. Despite the strong uptake of the SUMP concept, mobility-related problems persist in European municipalities. Linking theoretical approaches to understand the diffusion of policies with empirical findings from working with cities in the SUMP context, this article explores channels of policy diffusion and investigates shortcomings related to the respective approaches. Studies on the diffusion, the transfer and the convergence of policies identify formal hierarchy, coercion, competition, learning and networking, and the diffusion of international norms as channels for policy transfer. The findings which are presented in this paper are twofold: First, the paper finds evidence that the Commission takes different roles and uses all mechanisms in parallel, albeit with different intensity. It concludes that the approaches to explain policy diffusion are not competing or mutually exclusive but are applied by the same actor to address different aspects of a policy field, or to reach out to different actors. Second, the article provides first evidence of factors that limit the mechanisms' abilities to directly influence urban mobility systems and mobility behaviour.
The waste prevention program (WPP) from 2013 must be evaluated every 6 years and updated if necessary. The review and evaluation of the implementation of the WPP took place within the scope of the project. Based on the analysis results for the implementation of the WPP at federal, state and municipal level and an assessment of existing prevention potentials, concrete proposals for a possible further development and updating of the program on prioritized waste streams and corresponding priority prevention approaches were developed. In addition, structural adjustment and change needs of the WPP were worked out and further research was shown.
Design options for the new international market mechanism under article 6.4 of the Paris agreement
(2020)
In this project commissioned by the German Environment Agency, important aspects of the mechanism under Article 6.4 of the Paris Agreement were examined in more detail. This mechanism is to succeed the CDM under the Kyoto Protocol from 2021 onwards, but it will contain decisive improvements, especially with regard to a robust accounting of emission reductions and better integration into the national climate policy of the host country. The report is addressed to the international experts, in particular to the delegates to the climate conference and observers, and is therefore written in English. A German summary is included. The following topics are covered:
How does the mechanism achieve an overall reduction of global emissions?
Are there opportunities to use benchmarks to establish baselines?
Can contributions to increasing ambition be made by using Art. 6.4?
What contribution can the voluntary market make to increasing ambition in the future?
Introduction of incentives for the participation of private companies under Art. 6.4 of the PA.
The role of the Art. 6.4 mechanism on the way to a net zero emission world.
The project provides a contribution to the general discussion in the EU as well as to the Article 6 - Negotiations under the UNFCCC. It is a contribution that presents backgrounds and interrelationships for individual questions concerning the design of the new market mechanisms under Article 6 and can thus contribute to a more informed decision-making process.Since there are, however, several different ways of designing a mechanism that can avoid double counting and provide incentives for increasing ambition, this project is only one of several current contributions to the international discussion.
This SUITS policy brief aims to highlight how the transformational process of the nine local authorities involved in SUITS into learning organizations made these cities far better prepared to cope with the challenges due to the pandemic than they would otherwise have been. Due to the higher levels of organizational resilience and the awareness of individuals' importance during such external crises, the nine local authorities were not just trying to react to the unforeseen challenges, but were able to act with a clear pathway and to use their experiences to facilitate their learning from recent years. Of course, the pandemic could not have been foreseen, but as SUITS local authorities are becoming learning organizations, they are enhancing their organizational capacity. In so doing, they have been learning a required resilience to reduce the "complexity and confusion - of what to do best" in the beginning of the crisis and to cope with the challenges. This advantage was of enormous relevance for the local authorities.
At the heart of transition research lies the question of how to "scale up" sustainable alternatives from a protected niche to the creation of mainstream practices. While upscaling processes are often seen as an essential element that contributes to societal transformation, upscaling itself remains a fuzzy concept. We argue that some fundamental dilemmas of upscaling can be identified, for example, the different understanding of the concept by researchers and practitioners. The dilemmas should be addressed in a more reflexive way by those from the worlds of science and practice who are involved in collaborative research settings.
Industrial demand response can play an important part in balancing the intermittent production from a growing share of renewable energies in electricity markets. This paper analyses the role of aggregators - intermediaries between participants and power markets - in facilitating industrial demand response. Based on the results from semi-structured interviews with German demand response aggregators, as well as a wider stakeholder online survey, we examine the role of aggregators in overcoming barriers to industrial demand response. We find that a central role for aggregators is to raise awareness for the potentials of demand response, as well as to support implementation by engaging key actors in industrial companies. Moreover, we develop a taxonomy that helps analyse how the different functional roles of aggregators create economic value. We find that there is considerable heterogeneity in the kind of services that aggregators offer, many of which do create significant economic value. However, some of the functional roles that aggregators currently fill may become obsolete once market barriers to demand response are reduced or knowledge on demand response becomes more diffused.