Refine
Has Fulltext
- yes (78) (remove)
Year of Publication
Document Type
- Conference Object (78) (remove)
Division
- Zukünftige Energie- und Industriesysteme (78) (remove)
Under the framework of the UN framework convention on climate change (UNFCCC) and its Kyoto Protocol the targets and strategies for the second and third commitment period ("post-2012") have to be discussed and set in the near future. Regarding the substantial emission reductions that have to be shouldered by the industrialized nations over the next two decades it is evident that all available potentials to mitigate greenhouse gas (GHG) emissions have to be harnessed and that energy efficiency has to play a key role.
To substantiate this we developed a comprehensive scenario analysis of the EU 25s energy system and other greenhouse gas emissions until 2020. Our analysis shows which key potentials to mitigate greenhouse gas emissions are available, by which policies and measures they are attainable
and which will be benefits of greenhouse gas mitigation measures.
By this analysis we show the mayor role of energy efficiency in all sectors and all member states. We demonstrate that a reduction of EU 25 greenhouse gas emissions by more than 30 % by 2020 is feasible, reasonable and - to a large extent - cost effective. We also develop a comprehensive policy package necessary to achieve ambitious Post-Kyoto targets.
The scenario analysis results in a clear identification of the needed strategies, policies and measures and especially the relevance of energy efficiency to achieve the necessary ambitious greenhouse gas reduction targets. It also clearly shows the costs and the benefits of such a policy compared to a business as usual case.
Toothless tiger? : Is the EU action plan on energy efficiency sufficient to reach its target?
(2007)
Motivated by, inter alia, the increasing energy prices, the security of energy supply and climate change, the new EU "Action Plan for Energy Efficiency: Realising the Potential" (EEAP), sets out the policies and measures required to be implemented over the next six years to achieve the EU's goal of reducing annual primary energy consumption by about 20 % by 2020. By increasing energy efficiency, the security of energy supply and the reduction of carbon emissions are also improved.
The paper will analyse the 20 % target of the new EEAP for the energy demand side by comparison with different recent energy scenarios for the EU. It will therefore review the recommended policies and measures and examine, in which energy demand sectors energy efficiency may be increased and to which extend. The main focus is whether the recommended policies and actions will be sufficient and which additional measures may be useful, if additional measures are needed.
About 2 % of the overall electricity consumption of the EU is caused by circulators in single or double family homes and flats. A new technology of pumps with electronically commutated (EC) motor pumps is available now; it is one possible way to achieve a reduction in circulator annual electricity use by 60 % or more.
The project's objective is a market transformation towards this new very energy-efficient pump technologies - Energy+ pumps - for circulators in heating systems, both stand alone and integrated in boilers. Only few manufacturers have so far introduced the new pump technology to the market for single or double family homes and flats.
To bring more products to the market from all major manufacturers, the project will adapt and apply the technology procurement methodology as it was very successfully tested in the European Energy+ project on energy-efficient cold appliances.
Large buyers will be aggregated, to activate the pump and boiler manufacturers. Sales and training materials and a sizing spreadsheet software for installation contractors will be developed and applied. A competition both for energy-efficient products and marketing campaigns will be organised and the information on the Energy+ pumps will be disseminated widely through website, newsletter, media, and fairs.
This paper gives a short overview of this project and presents the results of the first project phases: a European wide market study on circulators and heating systems, and the first Energy+ lists for circulators, buyers and supporters.
Iran is one of the largest oil producers and natural gas owners globally. However, it has to struggle with domestic energy shortages, economic losses through energy subsidisation and inefficient energy infrastructures. Furthermore, GHG and other energy related emissions are rapidly increasing and posing a growing threat to local environment as well as global climate. With current trends prevailing, Iran may even become a net energy importer over the next decades. Resource allocation is therefore a crucial challenge for Iran: domestic consumption stands versus exports of energy.
The energy transformation sector clarifies Iran's dilemma: soaring electricity demand leads to blackouts, and power plant new builds are far from using most efficient technologies (e. g. CHP), therefore keeping energy intensive structures. But fossil fuels could be sold on international markets if spared by having more efficient energy infrastructures.
As shown by the high energy intensity of its economy, Iran has large potentials for energy saving and efficiency. In order to highlight and better identify this potential the paper contrasts a high efficiency scenario in all sectors of energy transformation and consumption with a possible "business as usual" development.
Using a bottom-up approach, the analysis provides a sector-by-sector perspective on energy saving potentials. These can be utilised on the demand side especially in the transport sector (fuels) and in households (electricity for appliances, natural gas for heating). Electricity generation bears efficiency potentials as well.
We conclude that Iran, but also the international community, would benefit on various levels from a more energy-efficient Iranian economy: Energy exports could increase, generating more foreign currency and reducing the pressures on international oil and gas prices; energy consumption would decrease, leading to lower needs for nuclear energy and for subsidies to Iranian people, as well as to a reduction of the high external costs entailed by fossil fuels combustion (smog in cities, environmental stress).
Based on a comprehensive scenario analysis of the EU's GHG emissions by 2020, we show that the 20% energy savings target set in the Action Plan "Doing more with less" in 2006 is still the most significant and thus indispensable strategy element within an ambitious EU climate and energy strategy targeting at a 30% reduction of GHG emissions by 2020.
The scenario analysis provides a sector by sector projection of potential future energy use and GHG emissions, combined with a detailed policy analysis of the core policies on energy efficiency by the EU and its Member States taken from current research results by the authors and others.
Consequently the paper identifies and quantifies the current implementation deficit in the EU and shows that, despite of sufficient targets, implementation is still significantly lacking in almost all fields of energy efficiency. Some, e.g. transport sector and buildings, are still substantially far from receiving the necessary political impetus. The paper also demonstrates co-benefits of a strong energy efficiency strategy, e.g. the achievability of the targets of the RES directive, which crucially depends on a strong efficiency policy.
We conclude that the efforts of the energy efficiency policy of the EU and its Member States have to be significantly intensfied. As proposed by the EU in case that other developed and key developing countries take up comparable targets in order to fulfil its role in the climate and energy strategy. To achieve this, we offer an analysis of the current weaknesses of EU energy efficiency policy and derive recommendations on how the EU can still reach its targets for 2020.
International consensus is growing that a transition towards a low carbon society (LCS) is needed over the next 40 years. The G8, the Major Economies Forum on Energy and Climate, as well as the Ad Hoc Working Group on Long-term Cooperative Action under the United Nations Framework Convention on Climate Change, have concluded that states should prepare their own Low-emission Plans or Low-emission Development Plans and such plans are in development in an increasing number of countries.
An analysis of recent long-term low emission scenarios for Germany shows that all scenarios rely heavily on a massive scale up of energy efficiency improvements based on past trends. However, in spite of the high potential that scenario developers assign to this strategy, huge uncertainty still exists in respect of where the efficiency potentials really lie, how and if they can be achieved and how much their successful implementation depends on more fundamental changes towards a more sustainable society (e.g. behavioural changes).
In order to come to a better understanding of this issue we specifically examine the potential for energy efficiency in relation to particular demand sectors. Our comparative analysis shows that despite general agreement about the high importance of energy efficiency (EE), the perception on where and how to achieve it differ between the analysed scenarios. It also shows that the close nexus between energy efficiency and non-technical behavioural aspects is still little understood. This leads us to the conclusion that in order to support energy policy decisions more research should be done on energy efficiency potential. A better understanding of its potential would help energy efficiency to fulfil its role in the transition towards a LCS.
Wind energy that can neither be fed into the grid nor be used regionally must be curtailed. This paper proposes different options to deal with such surplus wind energy amounts in a time horizon until 2020. It assesses their ability to handle the surplus energy in a sustainable way using a multi criteria analysis. The paper bases on a study that was prepared for the Ministry for Climate Protection, Environment, Agriculture, Nature Conservation and Consumer Protection of North Rhine-Westphalia between 2010 and 2012.
The cement industry is one of the major energy consuming and CO2 emitting sectors in China. In 2010, 1,868 million tons of cement has been produced, which accounted for 56.1% of the world's total cement production. The 11th Five-Year Plan (FYP) (2006-2010) included policy measures for CO2 emission abatement in cement production. Based on the main governmental framework of CO2 mitigation policies at national level in the cement sector, key policies and technologies used during this period are identified and their effects on CO2 reduction are assessed. This paper calculates the reduction of CO2 emissions related to four main policies and technologies for efficient cement production in the 11th and the 12th FYP (2011-2015) with 2005 as a reference year. These are waste heat recovery, closing outdated facilities, substitution for clinker production and other technologies aiming to increase energy efficiency. Due to these measures, we estimate that a total CO2 emission reduction during the 11th FYP of 397 million tonnes could be saved, which is considerably different to 185.75 million tonnes estimated by Zeng (2008) and 303 million tonnes by the NDRC by using different calculation methods. Of the four technologies, the 4th group of energy efficiency increasing techniques was the most important policy and avoided the largest amount of CO2 emissions. Previous energy intensity reduction was mainly due to the outdated production closing and energy efficiency improving. Based on the assessment of technology performance, it appears that there is still a large emission reduction potential in cement production processes. The paper calculates this potential for the 12th FYP period (2011-2015) based on these four identified policy measures. The result is compared to the Chinese government targets in the 12th FYP and promising future CO2 mitigation policies and technologies are proposed, such as the use of alternative energy.
Conventional new buildings in OECD countries with a history of building codes save about 50 % of energy compared to average buildings in the building stock. This improvement, however, is not enough to create a building standard with low lifetime costs nor to reach long-term climate protection targets. Much higher energy savings can already be achieved through proven high-efficiency building concepts bringing net economic benefits among other advantages.
A strategic approach to integrated building design is the key to achieving these high-energy savings at low or no extra cost in residential buildings. In our paper we describe the "Easy Efficiency Approach", which can reduce primary energy consumption by 40 to 60 % compared to conventional new building standards, or by 70% to 80% when compared to the primary energy consumption of the existing building stock, and should be regarded as the minimum. This strategy focuses on low-cost options, mainly passive options. Although it can already significantly reduce energy consumption, this first step will not be sufficient to reach long-term climate protection goals. It is thus necessary to implement and support what we call an "Advanced Efficiency Approach", with savings up to 90% , as compared to new building standards, as soon as possible to avoid lock-in effects. Further improvements, especially through the active use of renewable energies, reduce the net primary energy demand to 0 % and beyond.
According to the chosen strategy clearly defined energy performance ranges, with reference to possible savings, for different climate zones worldwide are given. In verifying this approach simulations with BAT (Best Available Technologies) buildings of different types (single family, multi family, high rise) were carried out in close cooperation with project partners. This data has also been verified through an empirical database of built examples both for energy consumption as well their economic soundness.
Refrigerators and freezers (subsumed under the term "cold appliances") are among the most widely used electrical appliances in the residential sector all around the world. Currently, about 1.4 billion domestic cold appliances worldwide use about 650 TWh electricity, which is 1.2 times Germany’s total electricity consumption, and cause CO2 emissions of 450 million tons of CO2eq.
Although the specific electricity consumption per volume of cold appliances has decreased during recent years due to technical progress and policy instruments like labelling and eco-design requirements, total worldwide energy consumption of these appliances is on the increase. Scenario calculations were carried out for 10 world regions by the Wuppertal Institute. Results show that about half of the energy consumption could be saved with the most energy-efficient appliances available today, and even higher savings will be possible with next generation technologies by 2030. According to the analysis, these savings are usually very cost-effective.
All these aspects are part of the new website "bigEE.net - Your guide to energy efficiency in buildings" which aims to provide information about technical options but also about policies to support the development of energy-efficient appliances.
To initiate and foster market transformation of energy-efficient appliances it is highly advisable for policymakers to generate appliances-specific policy packages. Since each regional market has its specificity (e.g. energy prices, typical appliance affecting the cost effectiveness of efficient appliances), the barriers for the market transformation of single product groups are also specific and need to be addressed by appropriate policies and measures. Elements of measures to build appropriate specific policy packages for refrigerators will be presented in the paper, and the refrigerator package from California (USA) demonstrates the successful implementation of a sector-specific package.
Several low-carbon energy roadmaps and scenarios have recently been published by the European Commission and the International Energy Agency (IEA) as well as by various stakeholders such as Eurelectric, ECF and Greenpeace. Discussions of these studies mainly focus on technology options available on the electricity supply side and mostly omit the significant challenges that all of the scenarios impose on the energy demand side.
A comparison of 5 decarbonisation scenarios from 4 of the most relevant recent scenario studies for the EU shows that all of them imply significant efficiency improvements in traditional appliances, usually well above levels historically observed over longer periods of time. At the same time they assume substantial electrification of transportation and heating. The scenarios suggest that both of these challenges need to be tackled successfully for decarbonising the energy system.
With shares of renewable electricity reaching at least 60 % of supply in 2050 in almost all of the decarbonisation scenarios, the adaptation of demand to variable supply becomes increasingly important. This aspect of demand side management should therefore be part of any policy mix aiming for a low-carbon power system.
Based on a quantitative analysis of 5 decarbonisation scenarios and a comparison with historical evidence we derive the (implicit) new challenges posed by the current low-carbon roadmaps and develop recommendations for energy policy on the electricity demand side.
Ausgangspunkt einer Bewertung des Standes der Energiewende ist die Verständigung darüber, was sie konkret umfasst. Hier bietet sich die Zielmatrix des Energiekonzepts der Bundesregierung vom Herbst 2010 an, die allerdings um folgende Punkte zu erweitern ist: vollständiger Ausstieg aus der Atomenergie bis zum Jahr 2022; Steigerung des Anteils der Kraft-Wärme-Kopplung an der gesamten Stromerzeugung bis 2020 auf 25 Prozent.
Erneuerbare Energien und Energieeffizienz : Systemlösungen als Schlüsselelement der Energiewende
(2013)
Erneuerbare Energien und Energieeffizienz sind die Schlüsselstrategien für die Umsetzung einer klimaverträglichen Energieversorgung in Deutschland und weltweit. Dieser Beitrag soll die Kopplung zwischen erneuerbaren Energien und Energieeffizienz im Kontext von Systemlösungen aufzeigen. Diese Systemlösungen sollten schon sehr frühzeitig und systematisch im Kontext von technologischen Lösungen, von Infrastrukturansätzen und von Politikansätzen bedacht werden.
Wasserelektrolyse und regenerative Gase als Schlüsselfaktoren für die Energiesystemtransformation
(2013)
Techno-economic feasibility study of solar and wind based irrigation systems in Northern Colombia
(2014)
Water pumping systems powered by solar and wind energy are a clean, decentralized and economic alternative for the irrigation of crops. The intense droughts experienced in the last years in Northern Colombia due to particularly strong Nino Phenomena have reactivated the need of reliable water pumping irrigation systems in that region. This study aims to assess the techno economic feasibility of solar and wind based pumping irrigation system, taking as case study the Municipality of Piojo in the Atlantico department. In the first stage of the study the irrigation water requirements were determined by using the software CROPWAT based on two different crop patterns that represent existing feasible alternatives for small farmers of the region: i) a common crop pattern, which represent the current average distribution of crops for subsistence farming and ii) a fruit cash crop pattern that comprises crops for which well established markets in the region exist. Solar wind and diesel based pumping systems were sized based on the crop water demands for 1 ha. The unit irrigation costs of the three technologies, the two crop patterns and the three irrigation methods (surface, sprinkler and drip) were calculated and compared. The economical analysis was complemented with a cost-benefit analysis over 20 years. Our results show that both renewable energy based pumping systems (wind and solar) can cover the irrigation water demands of small farmers in the region. The economical analysis shows that windmills are the most cost effective solution followed by the solar pumping system. Diesel pumping system was the less cost effective, even though it does not comprise investment in water storage tank. The cost benefit analysis demonstrates that any irrigation system is financially unfeasible when providing water to a common crop pattern. In case of the fruit cash crop scenario the highest dividends were obtained by the wind pumping system and the lowest dividends by the diesel pumping system. The lowest payback period was obtained by the windmill after 7 years and could be even feasible after the fifth year if the surplus water would be used to irrigate larger areas. Dividends obtained in a fruit cash crop scenario with irrigation after 20 years were in the range of EUR 5200 and EUR 11200 higher than dividends obtained by the same crop pattern but without irrigation.
Eine zukünftige Herausforderung der Energiewende wird darin bestehen, zunehmende Stromnetzeinspeisungen von fluktuierenden erneuerbaren Energien (FEE) in das Energiesystem zu integrieren. Neben den Flexibilitäten im Stromsystem sollten dabei auch die Möglichkeiten des Wärmemarktes zur Stabilisierung des Strommarktes berücksichtigt werden. So können Kraft-Wärme-Kopplungs-Anlagen (KWK), Elektroheizer und Wärmepumpen als Verbindungstechnologien zwischen Strom- und Wärmemarkt abhängig vom FEE-Dargebot und damit auch den Preissignalen des Strommarktes zu- bzw. abgeschaltet werden. Dazu werden Wärmespeicher benötigt, da die Flexibilisierung nur möglich ist, wenn die Produktion von der Wärmenutzung entkoppelt werden kann. Eine besonders aussichtsreiche Kopplung von Strom- und Wärmemarkt ist im Bereich der Fernwärmesysteme möglich, da sich hier große Energiemengen in Fernwärmespeichern im Vergleich zu dezentralen Lösungen kostengünstiger und effizienter speichern lassen.
Die Wahrung der Systemsicherheit muss perspektivisch von konventionellen Kraftwerken auf regenerative Energien und Kraft-Wärme-Kopplungsanlagen (KWK) verlagert werden. Diese sollen zukünftig Systemdienstleistungen übernehmen, um in zunehmendem Maße fluktuierende erneuerbare Energien (FEE) zu integrieren. Deutschland strebt an, im Jahr 2020 ein Viertel der elektrischen Energie aus KWK-Anlagen zu erzeugen. Damit werden diese Anlagen einen wesentlichen Teil der regelbaren Stromerzeugung ausmachen. Insbesondere die Erzeugung in dezentralen Blockheizkraftwerken (BHKW) wird zunehmen. Vor diesem Hintergrund stellt sich die Frage, ob dezentrale Anlagen überhaupt nennenswert zur Systemstabilität beitragen können.
This paper draws upon an extensive transdisciplinary scenario development in the context of the stakeholder oriented preparation of the climate protection plan of the German federal state North Rhine-Westphalia, which is home to the most important heavy industry cluster in Europe. In that context we developed differentiated bottom up climate change mitigation strategies and scenarios for the major energy intensive industries aluminium, iron and steel, cement, lime, paper and steam cracker for olefin production together with representatives of industry as well as society.
In the light of the tremendous challenges facing the energy systems of the Middle East and North Africa (MENA), a number of concepts, roadmaps and scenario studies have emerged, describing potential transformation pathways towards a more sustainable, renewable-based, energy supply future in the region. Our article uses the scientific approach of "transition research" to analyze the most pertinent publications and concepts in this field to identify the key drivers and barriers for the transformation of the regional energy systems. The analysis likewise includes an assessment of possible indicators and indexes that can be used to monitor the sustainability of the transformation process of MENA energy systems.
Jordan's electricity system has and continues to experience considerable pressures for reform due to continuous increase of electricity demand combined with high dependency on imported fossil fuels and a partially subsidised electricity market. In this paper we use the transitions pathways to examine and analyse pressures on the regime in relation to plausible future developments of particular niches such as renewable energy technologies. Our analysis is methodologically distinct in that we explicitly identify mechanisms operating in the system and relate those to existing scenarios to assess future developments. Currently, we see future developments being sensitive to the actions of key regime actors.
The overall objective of the web-based consumer information tool Euro-Topten is to promote the market transformation towards energy efficient products. Euro-Topten informs consumers about the most energy efficient products in various categories and thereby aims to directly influence the purchasing decisions of individuals or professional buyers.
Providers of internet-based information tools are confronted with the problem, that there is no bidirectional interaction with the users. Hence, it is difficult to evaluate if the specific needs of users are addressed, if and how the user processes this information and to what extent the information influences the user's decision making process.
To study these questions, a web-based survey was conducted in two consecutive rounds. In the first round the survey focused on the assessment of the information tool itself and the motivation for using the Euro-Topten websites. This survey was online on all active Euro-Topten partner websites from October to December 2012. In total, 1791 users completed the survey.
In the second round, a subset of the survey population was queried again. 1,043 participants agreed to take part in a more comprehensive follow up survey, 383 completed the second survey between May and July 2013. The second survey concentrated on the question how Euro-Topten has influenced the purchasing behaviour of the survey participants. This gave significant insights on how the information on the Euro-Topten websites has affected purchasing decisions of the surveyed users.
Based on a comparison of performance indicators of the most efficient products recommended on the Euro-Topten websites with performance indicators of a base case product available on the market, avoided energy demand could be estimated for those users, who bought products from the Euro-Topten list. Based on these results, two impacts of Euro-Topten could be estimated: The influence of Euro-Topten on purchasing decision of users and the associated reductions in energy demand and CO2-emissions.
Die Akteurswende
(2015)
Die zunehmende Abkehr vom ursprünglichen EEG-Vergütungssystem mit einer festen Einspeisevergütung hin zu einer mehr und mehr marktorientierten Ausrichtung führt zu der Frage, ob die Umstrukturierung des EEG am Ende zu einer neuen Phase der Energiewende führt, der Neo-EEG-Phase.
Im vorliegenden Artikel werden die Veränderungen und Entwicklungsphasen des EEG mit besonderem Blick auf die Akteure des Stromsystems analysiert. Im Kontext der Energiewende können die zu beobachtenden und teils deutlich einschneidenden Veränderungen für alle Akteure des Systems durchaus als "Akteurswende" verstanden werden.
Nach einer langen Phase der Stabilität ist die Stromwirtschaft in den vergangenen 15 Jahren stark in Bewegung geraten. Zunächst stand der Wechsel von staatlich überwachten und regulierten Gebietsmonopolen hin zu liberalisierten Erzeuger- und Verbrauchermärkten an. Im Moment befinden wir uns in einem ähnlichen Umbruch, weg von konventioneller hin zu erneuerbarer Energieerzeugung.
Im vorliegenden Beitrag soll der Leitfrage nachgegangen werden, ob die Paradigmen der einzelnen Phasen miteinander vereinbar sind, welche noch immer ihre Daseinsberechtigung haben und welche modifiziert werden sollten.
Technologische Innovationen in den Bereichen erneuerbare Energien und Energieeffizienz bilden eine wesentliche Grundlage der weltweiten Energiesystemtransformation und wirken bei geeigneter Implementierung als Wertschöpfungsmotor. Die Größe und erhebliche Wachstumsdynamik der internationalen Märkte für Energietechnologien und -systeme macht die Positionierung deutscher Unternehmen auf diesen Märkten daher zu einem Thema von sehr weitreichender wirtschaftspolitischer Relevanz. Daraus ergibt sich die Frage, wie Deutschland von einer konsequenten Umsetzung der Energiewende und seiner damit verbundenen Vorreiterfunktion auf den internationalen Märkten für Energietechnologien profitieren kann.
Die Energiewende stellt einen ambitionierten und zugleich hochkomplexen Transformationsprozess dar. Der vorliegende Artikel stellt acht Thesen auf, die dabei helfen können, die Herausforderungen besser zu verstehen und Ansatzpunkte für zukünftiges Handeln zu identifizieren sowie Forschungsbedarf aufzuzeigen.
Die Transformation des deutschen Energiesystems in Richtung signifikanter Reduktion energiebedingter CO2-Emissionen kann durch eine Abfolge verschiedener Phasen beschrieben werden. Phasenübergänge ergeben sich dabei aus strukturellen Erfordernissen im Gesamtsystem bei kontinuierlichem weiteren Ausbau erneuerbarer Energiewandler, insbesondere Sonne und Wind. Die anstehende zweite Phase der Transformation ist durch eine umfassende Systemintegration volatiler erneuerbarer Energien insbesondere im Bereich der Strombereitstellung geprägt. Dies erfordert sowohl eine flexible komplementäre Erzeugung als auch die Aktivierung von Flexibilitätsoptionen auf der Verbrauchsseite.
Energy systems with high shares of renewable electricity are feasible, but require balancing measures such as storage, grid exchange or demand-side management to maintain system stability. The demand for these balancing options cannot be assessed separately since they influence each other. Therefore, a model was developed to analyze these mutual dependencies by optimizing a concerted use of balancing technologies. This model is presented here. It covers the European electricity system in hourly resolution. Since this leads to a large optimization problem, several options for reducing system complexity are presented. The application of the model is illustrated with a case study outlining the effects of pumped hydro storage and controlled charging of electric vehicles in central Europe.
De-industrialization, climate and demographic changes are only a few key words that indicate the challenge of urban development in many industrialized countries for the coming decades. A fundamental transformation of infrastructure and the built environment is expected to adjust to future needs. Numerous concepts of integrating efficiency and renewable energy sources into urban planning were elaborated in recent years. Energy sufficiency in the meaning of voluntary demand reduction of energy intensive goods and services is the third and mostly forgotten pillar of sustainable development. However, organizational and spatial measures are needed to support behavior modification. This paper presents results of a transdisciplinary research design with local stakeholders and scientific experts to develop an understanding of what energy sufficiency might contribute to sustainable urban development. Based on the Multi-Level-Perspective of the transition research approach, it analyzes how stakeholders and experts define energy sufficiency structures for the shrinking district of Vohwinkel (Germany). The paper also shows a compilation and evaluation of measures which facilitate energy sufficient behavior in the fields of space heating and passenger transport on a local level. The methodological concept comprises expert interviews, thought experiments with stakeholders to develop a vision of an "energy sufficient Vohwinkel 2050" as well as a stakeholder workshop to discuss the results. A shrinking population is seen as a chance to actively adapt the built environment to foster energy sufficiency.
Die Transformation des Energieversorgungssystems zu einer dekarbonisierten Energiebereitstellung bedingt ein koordiniertes Zusammenspiel der Sektoren Strom, Wärme und Verkehr. Dabei ist die Kopplung des Stromsektors mit dem Wärmesektor eine der entscheidenden Maßnahmen bei der Transformation. Die Aufnahme von Wind- und Sonnenenergie in das Netz kann durch genaue Einspeiseprognosen optimiert werden, die Kopplung zum Wärmesektor mittels Wärmepumpen und Power-to-Heat (Heizstab) ermöglicht die weitere Flexibilisierung der Nachfrageseite. Diese Interaktion wird durch intelligente Lösungen der Systemtechnik für das Energie- und Netzmanagement ermöglicht. Die Entwicklung von entsprechenden Anreizsystemen, Marktmechanismen und Geschäftsmodellen ist ebenfalls erforderlich, um diese Kopplung auch wirtschaftlich erfolgreich zu gestalten. Der Beitrag stellt das im Forschungsvorhaben "Interaktion EE-Strom, Wärme und Verkehr" erstellte 80-Prozent-Szenario für das Jahr 2050 vor und zeigt anhand von Beispielen zukünftige Anforderungen und Entwicklungen zu dieser Thematik auf.
Als Beitrag zu einer fundierten Diskussion über adäquate Politikinstrumente in der Wärmewende hat der FVEE mit seinen Mitgliedsinstituten im September 2015 ein Positionspapier erstellt: "Erneuerbare Energien im Wärmesektor - Aufgaben, Empfehlungen und Perspektiven". Dieses gibt einen umfassenden Überblick über die Herausforderungen und Handlungsoptionen im Wärmesektor und bietet damit eine wichtige Orientierung bei der Gestaltung der Energiewende.
Um die Energiewende erfolgreich umzusetzen, plädiert der FVEE für eine deutliche Stärkung des Wärmesektors in der Energiepolitik und eine entschiedene und langfristig angelegte Politik der Wärmewende, die den besonderen Anforderungen des Wärmesektors gerecht wird. Im vorliegenden Beitrag werden ausgewählte Analyseergebnisse und Empfehlungen des Positionspapiers vorgestellt.
Die Wärmewende ist als Teil der Energiewende ein gesellschaftliches Großprojekt. Für eine erfolgreiche Umsetzung benötigt die Wärmewende im Vergleich zur Stromwende vielfältigere und differenziertere Handlungsmechanismen. Es geht dabei nicht nur um den Ersatz fossiler Energieträger im Bereich der Wärmeversorgung durch regenerative Quellen, sondern vielmehr um einen systemischen Ansatz, der zudem eine stringente Forcierung von Energieeffizienzmaßnahmen, eine optimierte Verzahnung von Strom- und Wärmesystemen sowie eine zielgruppenspezifische Adressierung und Sensibilisierung von Akteursgruppen (hier: Kommunen, Privathaushalte, Industrie, GHD) erforderlich macht.
Im Rahmen der Energiewende haben sich erneuerbare Energien zur Stromerzeugung in Deutschland bereits etabliert. Um jedoch das volle Potenzial der Reduktion von fossilen Energien und Treibhausgasen (THG) auszuschöpfen, muss aus der Energiewende auch eine Wärmewende werden. Der Energieeinsatz für die Wärmebereitstellung der Industrie betrug im Jahr 2012 etwa 535 TWh (22 % des Endenergiebedarfs Deutschlands), hauptsächlich bereitgestellt durch Erdgas (48 %) und Steinkohle (17 %) 1. Damit wurden für die Wärmebereitstellung im Industriesektor rund 159 Mio. t CO2-äq emittiert, was 17 % der THG-Emissionen Deutschlands entspricht.
Aufgrund der Vielseitigkeit der einzelnen Branchen und Wärmeanwendungen im Industriesektor kann dieser Beitrag nur beispielhaft einzelne Komponenten für eine Wärmewende aufzeigen, die auch wiederum die Aktivitäten der einzelnen Autoren widerspiegeln. Ausgehend von einer nationalen Betrachtung und expliziten Modellierungsergebnissen für die energieintensive Industrie in NRW, werden einzelne Potenziale und Aktivitäten im Bereich der Wärmebereitstellung, -speicherung und -integration behandelt.
Renewable energy plays a key role in the sustainable pathway towards a low carbon future and, despite new supply capacities, the transformation of the energy system also requires the adoption of a method which allows for the integration of increasing amounts of renewable energy. This requires a transition to more flexible processes at an industrial level and demand side management (DSM) is one possible way of achieving this transition. Currently, increased shares of variable renewable energy can cause the electricity supply to become more volatile and result in changes to the electricity market. In order to develop a new dynamic equilibrium to balance supply and demand, sufficient flexibility in demand is required. As adequate storage systems are not available in the short to medium term, the potential for large electricity consumers to operate flexibly is an attractive, pragmatic and feasible option. Recent studies in Germany suggest that there is significant potential for DSM in so-called "energy-intensive industries". However, the figures (which fall in the approximate range of 1,250-2,750 MW positive and 400-1,300 MW negative shiftable load) should be interpreted with caution. The range of industrial processes considered are diverse and vary from plant to plant, with the result that it is difficult to provide accurate calculations of the accumulated potential for Germany or the EU as a whole. Based on extensive surveys and panel discussions with representatives from energy-intensive industries (aluminum, cement, chemicals, iron & steel, pulp & paper), which together account for approximately one third of the industrial electricity demand in Germany, our paper provides an overview of both the opportunities and the barriers faced by DSM. One of the key findings is the possible loss in energy efficiency due to DSM: in order to decrease or increase production depending on the stability needs of the electricity system, plants and processes may no longer operate at their optimum levels. The effects on downstream production must also be taken into account in order to gain a more complete understanding of the overall effects of industrial DSM.
Energy intensive industries are one of the fields in which strong increases of energy efficiency and deep decarbonisation strategies are particularly challenging. Although European energy intensive industries have already achieved significant energy and greenhouse gas reductions in the past, much remains to be done to make a significant contribution to achieving European as well as national climate mitigation targets of greenhouse gas emission reductions by -80% or more (compared to the baseline of 1990). North Rhine-Westphalia (NRW) is a European hotspot for coping with this challenge, accommodating more than 10% of the energy intensive industries of the EU28. It is also the first German state to have adopted its own Climate Law, enacting state-wide CO2 emission reductions by 80% until 2050 compared to 1990. The state government initiated the project "Platform Climate Protection and Industry North-Rhine Westphalia" to identify and develop the necessary far-reaching low carbon innovation strategies for energy intensive industries. Heart of the project was a dialogue process, which involved a broad spectrum of stakeholders from steel, chemical, aluminium, cement, glass and paper producing industries. Besides enhancing and broadening the knowledge on high efficiency and low-carbon technologies within industries, the aim was to explore possible pathways and preconditions for the application of these technologies in energy intensive industries as well as to strengthen the motivation of companies for initiatives and investments in technologies with lower CO2 emissions. The results of the dialogue shall provide a basis for a possible low-carbon industry roadmap NRW and may also serve as an example for other industrialized regions in the EU and globally. The paper sketches the structured dialogue process with the stakeholders from companies as well as industrial associations and presents the learnings regarding the engagement of energy intensive industries into ambitious climate policies on a regional level. These include existing limitations as well as chances in the respective sectors on the state level, regarding their economic and technical structures as well as their innovation systems. The findings are based on more than a dozen stakeholder workshops with industry companies and more than 150 individual representatives of NRW's energy intensive industries as well as on background research in the initial phase of the project.
Heat integration and industrial symbiosis have been identified as key strategies to foster energy efficient and low carbon manufacturing industries (see e.g. contribution of Working Group III in IPCC's 5th assessment report). As energy efficiency potentials through horizontal and vertical integration are highly specific by site and technology they are often not explicitly reflected in national energy strategies and GHG emission scenarios. One of the reasons is that the energy models used to formulate such macro-level scenarios lack either the necessary high technical or the spatial micro-level resolution or both. Due to this lack of adequate tools the assumed huge existing potentials for energy efficiency in the energy intensive industry cannot be appropriately appreciated by national or EU level policies. Due to this background our paper describes a recent approach for a combined micro-macro energy model for selected manufacturing industries. It combines national level technical scenario modelling with a micro-modelling approach analogous to total site analysis (TSA), a methodology used by companies to analyse energy integration potentials on the level of production sites. Current spatial structures are reproduced with capacity, technical and energy efficiency data on the level of single facilities (e.g. blast furnaces) using ETS data and other sources. Based on this, both, the investments in specific technologies and in production sites are modelled and the evolvement of future structures of (interconnected) industry sites are explored in scenarios under different conditions and with different objectives (microeconomic vs. energy efficiency optimization). We further present a preliminary scenario that explores the relevance of these potentials and developments for the German steel industry.
In dem Forschungsprojekt "Technologien für die Energiewende" (TF_Energiewende) bewertet ein Konsortium von drei Verbundpartnern und zehn Technologiepartnern unter der Federführung des Wuppertal Instituts seit Herbst 2016 den mittelfristigen Forschungs- und Entwicklungsbedarf für die zentralen Technologien, die im Rahmen der Energiewende derzeit und zukünftig benötigt werden.
Bei der Energiewende handelt es sich um einen komplexen Transformationsprozess, der nicht allein aus der nationalen Perspektive betrachtet werden kann. Er ist nicht vollständig unabhängig, sondern in einen Mehr-Ebenen-Prozess eingebunden. Es gilt entsprechend sowohl lokale als auch regionale, nationale, europäische und auch die internationalen Energiewendeprozesse und zugehörigen Rahmenbedingungen zu diskutieren und zu beachten. Es gilt aber auch, über den eigentlichen Energiebereich hinausgehende Trends in ihren Wechselwirkungen mit dem Energiesystem zu identifizieren und zu analysieren. Mit der Energiewende wird zudem eine Zielvielfalt angesprochen. Es geht über das Erreichen von Klimaschutzzielen hinaus um eine größere Vielfalt von gesellschaftlich-politischen Zielen.
Der Transformationsprozess hat keine eindimensionale Zielorientierung, sondern muss in einer mehrdimensionalen Betrachtung analysiert werden.
Szenarien spielten und spielen eine zentrale Rolle für die Gestaltung der Energiewende. Sie beschreiben dabei auf konsistente Weise die mögliche zukünftige Entwicklung des Systems unter bestmöglicher Berücksichtigung des aktuellen Wissens bezüglich des Systems, d.h. der internen Abhängigkeiten und Wechselwirkungen der Systemkomponenten, aber auch die Abhängigkeit der Systementwicklung von äußeren Faktoren. Damit liefern Szenarien Leitplanken für zentrale technisch-strukturelle, energiepolitische, ökonomische und gesellschaftliche Weichenstellungen, die einen zielgerichteten Transformationsprozess flankieren müssen.
Following the decisions of the Paris climate conference at the end of 2015 as well as similar announcements e.g. from the G7 in Elmau (Germany) in the summer of 2015, long-term strategies aiming at (almost) full decarbonisation of the energy systems increasingly move into the focus of climate and energy policy. Deep decarbonisation obviously requires a complete switch of energy supply towards zero GHG emission sources, such as renewable energy. A large number of both global as well as national climate change mitigation scenarios emphasize that energy efficiency will likewise play a key role in achieving deep decarbonization. However, the interdependencies between a transformation of energy supply on the one hand and the role of and prospects for energy efficiency on the other hand are rarely explored in detail.
This article explores these interdependencies based on a scenario for Germany that describes a future energy system relying entirely on renewable energy sources. Our analysis emphasizes that generally, considerable energy efficiency improvements on the demand side are required in order to have a realistic chance of transforming the German energy system towards 100 % renewables. Efficiency improvements are especially important if energy demand sectors will continue to require large amounts of liquid and gaseous fuels, as the production of these fuels are associated with considerable energy losses in a 100 % renewables future. Energy efficiency on the supply side will therefore differ considerably depending on how strongly the use of liquid and gaseous fuels in the various demand sectors can be substituted through the direct use of electricity. Apart from a general discussion of the role of energy efficiency in a 100 % renewable future, we also look at the role of and prospects for energy efficiency in each individual demand sector.
Dieser Artikel ist der Frage gewidmet, welchen Beitrag eine verstärkte Sektorenkopplung zum Gelingen der Energiewende leisten kann. Ausgehend von einer Einführung der Prinzipien und Technologien bietet er Einblicke in die zur Erforschung der Sektorenkopplung angewendeten Methoden, sowie ausgewählte Ergebnisse.
Hinsichtlich der Energieversorgung versteht man unter Sektorenkopplung im Allgemeinen eine engere Verzahnung und Verknüpfung verschiedener Energieanwendungsbereiche, sowie die Zunahme von Verzweigungs- und Verknüpfungsstellen im Energiesystem. Die wesentlichen Anwendungsbereiche der Energie sind dabei die Bereitstellung von Strom, Wärme und Mobilität.
Contemporary combined heat and power (CHP) systems are often based on fossil fuels, such as natural gas or heating oil. Thereby, small-scale cogeneration systems are intended to replace or complement traditional heating equipment in residential buildings. In addition to space heating or domestic hot water supply, electricity is generated for the own consumption of the building or to be sold to the electric power grid.
The adaptation of CHP-systems to renewable energy sources, such as solid biomass applications is challenging, because of feedstock composition and heat integration. Nevertheless, in particular smallscale CHP technologies based on biomass gasification and solid oxide fuel cells (SOFCs) offer significant potentials, also regarding important co-benefits, such as security of energy supply as well as emission reductions in terms of greenhouse gases or air pollutants. Besides emission or air quality regulations, the development of CHP technologies for clean on-site small-scale power generation is also strongly incentivised by energy efficiency policies for residential appliances, such as e.g. Ecodesign and Energy Labelling in the European Union (EU). Furthermore, solid residual biomass as renewable local energy source is best suited for decentralised operations such as micro-grids, also to reduce long-haul fuel transports. By this means such distributed energy resource technology can become an essential part of a forward-looking strategy for net zero energy or even smart plus energy buildings.
In this context, this paper presents preliminary impact assessment results and most recent environmental considerations from the EU Horizon 2020 project "FlexiFuel-SOFC" (Grant Agreement no. 641229), which aims at the development of a novel CHP system, consisting of a fuel flexible smallscale fixed-bed updraft gasifier technology, a compact gas cleaning concept and an SOFC for electricity generation. Besides sole system efficiencies, in particular resource and emission aspects of solid fuel combustion and net electricity effects need to be considered. The latter means that vastly less emission intensive gasifier-fuel cell CHP technologies cause significant less fuel related emissions than traditional heating systems, an effect which is further strengthened by avoided emissions from more emission intensive traditional grid electricity generation. As promising result, operation "net" emissions of such on-site generation installations may be virtually zero or even negative. Additionally, this paper scopes central regulatory instruments for small-scale CHP systems in the EU to discuss ways to improve the framework for system deployment.
In addition to the expansion of renewable energies, the efficient use of energy is crucial in order to ensure energy transition successful. The Federal Government of Germany has therefore set itself clear objectives with the National Energy Efficiency Action Plan (NAPE), which aims to reduce the primary energy consumption in Germany - compared to 2008 levels - by 20 per cent until 2020, and by 50 per cent until 2050. In addition, greenhouse gas emissions should fall by 40 per cent compared to 1990.
To reach this goal, the German Federal Ministry of Economic Affairs and Energy (BMWi) inter alia launched the "National Top Runner Initiative (NTRI)" in January 2016. It is an important component and concerns private homes, as well as industry, retail and services.
The NTRI is intended to bring energy efficient and high-quality appliances (so called Top Runners) onto the market more quickly, thus accelerate market replacement. For this purpose, motivation, knowledge and competence in product-related energy efficiency is to be strengthened and expanded along the whole value chain - from the appliance manufacturer to the retailer and the consumer. Manufacturers are pushed to develop more efficient products and consumers get valuable information about Top-Runner products and how they can benefit. In this context, retailers are especially relevant as they act as "gatekeeper" between manufacturers and consumers. They play a key role in advancing an energy efficient production and consumption. They do not only select the products but they also have a direct contact to consumers and influence the purchase decision. In this paper, special emphasis will be put on the role of retailers and the efforts of the National Top Runner Initiative will be illustrated. Barriers and incentives to motivate this target group will be elaborated.
In recent years, many energy scenario studies have proven that a power supply system based on renewable energies (RE) >90 percent is feasible. However, existing scenarios differ significantly in the composition of generation technologies. Some scenarios focus on wind energy in the northern part of Europe, others base on a large utilisation of solar technologies in the south. Apart from the generation capacities, the needed technical flexibilisation strategies such as grid extension, demand flexibilisation and energy storage are generally known and considered in many scenarios. Yet, the impact of different renewable generation strategies on the local utilisation of flexibility options needs to be further assessed. Based upon the BMBF research project RESTORE2050, analyses have been carried out that focus on these interdependencies. The results of the project show that the local utilisation of flexibilisation options depends to a great extent on the technology focus of the long-term renewable expansion strategy. This applies for the spatial flexibilisation as provided by transnational interconnection capacities, especially the ones connecting regions with a surplus of power generation (e.g. GB, Norway and Spain). Another impact of the renewable scenario is seen on the required temporal flexibilisation of electricity generation and demand. In addition, the available options will compete for high utilisation in a future energy system. The differences in the utilisation of these applications, which base on the varying shares of photovoltaic (PV) and wind energy generation, lead to the conclusion that the decision about longterm RE expansion ought to be made very soon in order to avoid inefficient flexibility pathways. Otherwise, if the future RE structure will be kept open, adequate adoption of new flexibility options will be difficult, especially in case of technologies with long lead and realisation time (e.g. new power grids and large scale energy storage devices).
There is an increasing pressure that enhanced and novel energy technologies are swiftly adopted by the market to ensure meeting the energy and climate targets. An important issue with such novel developments is their risk to be stuck in the "valley of death", i.e. that their transition to the market is delayed or unsuccessful. Publicly supported demonstration projects could help to bridge the valley of death by reducing barriers to the adoption caused by missing information and perceived risks. A challenge for technology demonstrations in the industrial context is their often high investments that are required to prove their real-world benefits. Given the magnitude of such investments, it becomes crucial that public funding focuses on the most promising demonstration proposals. Structured evaluation processes can help to facilitate the identification of promising proposals and to improve the quality and transparency of decisions. This paper deals with a corresponding multi-staged multi-criteria decision support system (DSS) suggested to the German Federal Ministry for Economic Affairs and Energy. It deals with the evaluation of demonstration proposals across three stages: The first stage represents a filtering stage to identify those proposals relevant for further considerations. The second stage comprises a multi-criteria scoring method drawing on an evaluation against nineteen criteria. The final third stage serves to critically review the need for public funding of well-scored proposals. This contribution outlines the development of the DSS and its design and thus provides insights on proposal evaluating in energy research.
The Port of Rotterdam is an important industrial cluster mainly comprising of oil refining, chemical manufacturing and power and steam generation. In 2015, the area accounted for 18 % of the Netherlands' total CO2 emissions. The Port of Rotterdam Authority is aware that the port's economy is heavily exposed to future global and EU decarbonization policies, as the bulk of its activities focuses on trading, handling, converting and using fossil fuels. Based on a study for the Port Authority, our paper explores possible pathways of how the industrial cluster can keep its strong market position in Europe and still reduce its CO2 emissions by 98 % by 2050. The "Biomass and CCS" scenario assumes that large amounts of biomass can be supplied sustainably and will be used in the port for power generation as well as for feedstock for refineries and the chemical industry. Fischer-Tropsch fuel generation plays an important role in this scenario, allowing the port to become a key cluster for the production of synthetic fuels and feedstocks in Western Europe. The "Closed Carbon Cycle" scenario assumes that renewables-based electricity will be used at the port to supply heat and hydrogen for the synthetic generation of feedstock for the chemical industry. The carbon required for the chemicals will stem from recycled waste. Technologies particularly needed in this scenario are water electrolysis and gasification or pyrolysis to capture carbon from waste, as well as technologies for the production of base chemicals from syngas. The paper compares both scenarios with regard to their respective technological choices and infrastructural changes. The scenarios’ particular opportunities and challenges are also discussed. Using possible future pathways of a major European petrochemical cluster as an example, the paper illustrates options for deep decarbonisation of energy intensive industries in the EU and beyond.