Power sector decarbonisation : metastudy ; WP 2.2 quantitative analysis of existing EU-wide studies
(2012)
Energy of the future? : Sustainable mobility through fuel cells and H2 ; Shell hydrogen study
(2017)
Over the years Shell has produced a number of scenario studies on key energy issues. These have included studies on important energy consumption sectors such as passenger cars and commercial vehicles (lorries and buses) and the supply of energy and heat to private households, as well as studies on the state of and prospects for individual energy sources and fuels, including biofuels, natural gas and liquefied petroleum gas.
Shell has been involved in hydrogen production as well as in research, development and application for decades, with a dedicated business unit, Shell Hydrogen. Now, in cooperation with the Wuppertal Institute in Germany, Shell has conducted a study on hydrogen as a future energy source. The study looks at the current state of hydrogen supply path- ways and hydrogen application technologies and explores the potential and prospects for hydrogen as an energy source in the global energy system of tomorrow. The study focuses on the use of hydrogen in road transport and specifically in fuel cell electric vehicles (FCEVs), but it also examines non-automotive resp. stationary applications.
Measures to address climate change can result in human rights violations when the rights of affected populations are not taken into consideration. Climate change projects in so-called "developing" countries are often financed and/or also implemented by industrialised countries. The research project ClimAccount Human Rights Accountability of the EU and Austria for Climate Policies in Third Countries and their possible Effects on Migration focused on the accountability of the EU and its Member States with regard to negative impacts of climate change measures they are involved in on human rights in third countries - especially those associated with "migration effects". Based on three case studies - projects registered under the Kyoto Protocol's Clean Development Mechanism - the human rights dimension of climate change action was discussed, areas of human rights concerns that were discernible in all three case study projects were identified, the issue of extraterritorial human rights obligations was analysed and the subject of access to justice was scrutinized.
Good practices : ESSAY
(2008)
The research project seeks to identify the CDM SD tool's possible shortcomings, and to make structured recommendations on how to improve the EB's SD tool. Findings from this project are meant to have a lighthouse effect on the development of provisions on Sustainable Development within other carbon mechanisms of the UNFCCC and beyond. This report represents the consolidated findings of three work packages within this research project. The first chapter provides some background on the subject at hand, and leads into the report. The following chapter covers the assessment and comparison of the SD provisions of selected flexible mechanisms and multilateral standards.
Standardised Baselines (SBs) shall improve the opportunities for least developed countries and other underrepresented regions to participate in the Clean Development Mechanism (CDM). SBs allow for shifting the effort of developing baseline scenarios and additionality testing from the individual project to the sectoral level. This research project followed two separate approaches in order to gather experiences with the development of SBs and to contribute to the advancement of the SB regulatory framework. Under the first approach, an SB for rural electrification in Ethiopia was developed in cooperation with the Ethiopian Designated National Authority, which submitted the SB to the UNFCCC Secretariat. In the second part of the project, a scoping study assesses how SBs can be developed to cover complex integrated production processes. The Indonesian cement sector was chosen as case for this study.
Mitigating climate change, investing in development : fostering the CDM in least developed countries
(2012)
The increasing rate of renewable energies poses new challenges for industries: the amount of wind and solar energy is by far more subject to fluctuations than that of fossil based energy. Large production facilities from the aluminium, cement, steel or paper industry, however, depend on a highly secure energy supply. To which amount is a limitation of fluctuations possible? This was the key question of the project "Flexibilisation of Industries Enables Sustainable Energy systems", which was realised by the Wuppertal Institute in cooperation with the polymers company Covestro last year. In the final report, authors around project co-ordinator Karin Arnold not only show which technological and economic parameters have been considered, but also present possible business models to promote "flexibility products".
Germany's eco-innovation performance has declined compared to previous reports and scores 123 against 100 of the EU average. It is still quite high with respect to the input side of eco-innovation and relatively good, i.e. above EU average concerning socio-economic and eco- innovative outputs. However, the revised eco-innovation index shows weaknesses in eco-innovation activities and environmental outcomes. All in all, Germany ranks 6 this year.
The Wuppertal Institute for Climate, Environment and Energy and the UNEP/Wuppertal Institute Collaborating Centre on Sustainable Consumption and Production (CSCP) set out to analyse Japanese dematerialisation and resource efficiency strategies within the 3R scope and searched for options of enhancing resource effi ciency strategies, commissioned by the German Federal Environment Agency. A further task of the project was to initiate a policy dialogue including stakeholders, academia, politics and Japanese and European environmental experts. The following paper summarises findings from the analyses, the results of the policy dialogues (Experts Workshop, 6 June 2007 and International Conference, 6 November 2007) and draws conclusions for a potential Japanese-European cooperation on the resource efficiency issue.
Digitalisation is taking place at a fast pace in all European countries and it is transforming the economies, societies, communication, jobs and the necessary skills for the workplace and everyday life. The Covid-19 pandemic is also accelerating digitalisation at many levels.
To address the great challenges resulting from this, the European Commission has launched the Green Deal, a long-term transformation strategy towards an innovative and sustainable society. Three important initiatives under the Green Deal are the New Circular Economy Action Plan, the Biodiversity Strategy for 2030 and the Zero Pollution Action Plan. The various strategies and action plans draw up a large portfolio of measures, instruments and milestones that are always linked to digital technologies. Ideally, these are eco-innovative and sustainable and contribute to improving living conditions in Europe.
The EIO Biennial Report 2020, which looks at a different topic every two years, considers digitalisation a major opportunity to accelerate the transition to a circular Europe. In the current report, the authors provide an overview of eco-innovation trends, illustrated by digital technology and policy practices that can further drive the circular economy.
The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
This report details current and potential recycling of critical metals in Waste from Electrical Electronic Equipment (WEEE). The term "critical metals" is used instead of "rare metals" because the concept incorporates not only supply but also demand. The EU needs access to these metals and recycling can be an important part of the supply-strategy.
The study shows that the current recycling of critical metals in WEEE is very low, but that the potential amount could be increased threefold within 2015. Improving of the recycling of critical metals requires a variety of initiatives tackling different week point in the overall process: better collection, better pre-processing and end-processing, limiting the export of WEEE or used products out of the EU and better design of the EEE-products.
This study shows that data on sales volumes, WEEE composition and the composition of critical metals in EEE is currently insufficient for detailed analysis and monitoring, and addressing this should be a priority. Further, more detailed information on components used in EEE product groups would enable recyclers to identify and access the most materially important components. Dialog between recyclers, smelters and manufacturers could also facilitate product design that supports the recycling process.
Modelling a socially and environmentally sustainable Europe : final report part II: Technical report
(1998)
Options and potentials for energy end-use efficiency and energy services : summary ; final report
(2006)
Energy+ pumps : technology procurement for very energy efficient circulation pumps ; final report
(2009)
The study "Towards a Single and Innovative European Transport System" is developing action plans for the establishment of an integrated transport system in Europe. This report was created in a joint effort between VDI/VDE Innovation + Technik GmbH (Germany), Wuppertal Institute for Climate, Environment and Energy (Germany) and the Centre of Research and Technology Hellas, CERTH (Greece) on behalf of the European Commission's DG MOVE. Focus of the report is the international assessment of six different countries - Brazil, China, India, Japan, South Korea, USA - in five focus areas across all transportation modes. It provides actions plans on how to overcome existing European barriers towards a single and innovative European Transport System based on best practices and lessons learned in the countries under study. In addition to the actions plans, the study also provides recommendations for international collaboration.
This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.