Refine
Year of Publication
Document Type
- Report (36)
- Peer-Reviewed Article (27)
- Part of a Book (26)
- Working Paper (17)
- Contribution to Periodical (10)
- Conference Object (5)
- Book (2)
Division
- Stoffströme und Ressourcenmanagement (123) (remove)
Poor sustainability and increasing economic shortcomings in fossil raw material use besides further technical developments of substitutes lead to a growing potential for CO2-utilisation. Hence, we balanced CO2-based methane and methanol production in a life cycle assessment and identified CO2-utilisation as a greenhouse gas saving method. However, it requires a lot of renewable energy.
Biodiversity loss is widely recognized as a serious global environmental change process. While large-scale metal mining activities do not belong to the top drivers of such change, these operations exert or may intensify pressures on biodiversity by adversely changing habitats, directly and indirectly, at local and regional scales. So far, analyses of global spatial dynamics of mining and its burden on biodiversity focused on the overlap between mines and protected areas or areas of high value for conservation. However, it is less clear how operating metal mines are globally exerting pressure on zones of different biodiversity richness; a similar gap exists for unmined but known mineral deposits. By using vascular plants' diversity as a proxy to quantify overall biodiversity, this study provides a first examination of the global spatial distribution of mines and deposits for five key metals across different biodiversity zones. The results indicate that mines and deposits are not randomly distributed, but concentrated within intermediate and high diversity zones, especially bauxite and silver. In contrast, iron, gold, and copper mines and deposits are closer to a more proportional distribution while showing a high concentration in the intermediate biodiversity zone. Considering the five metals together, 63% and 61% of available mines and deposits, respectively, are located in intermediate diversity zones, comprising 52% of the global land terrestrial surface. 23% of mines and 20% of ore deposits are located in areas of high plant diversity, covering 17% of the land. 13% of mines and 19% of deposits are in areas of low plant diversity, comprising 31% of the land surface. Thus, there seems to be potential for opening new mines in areas of low biodiversity in the future.
Das Projekt "Ressourcenpolitik" (PolRess) begleitete die Debatte um die anspruchsvolle Ressourcenpolitik, zu der sich Deutschland verpflichtet hat, aus politikwissenschaftlicher, juristischer und ökonomischer Perspektive und setzte dabei auch selbst Impulse.
Der Abschlussbericht fasst Überlegungen des Projektteams für die Weiterentwicklung der Ressourcenpolitik zusammen. Darin heißt es unter anderem, dass das in der Nachhaltigkeitsstrategie erfasste Ziel der Bundesregierung, die Rohstoffproduktivität bis zum Jahr 2020 gegenüber 1994 zu verdoppeln, wohl nicht ohne drastische Maßnahmen (wie einem Ausstieg aus der Braunkohle) erreicht werden kann. Da das hiesige und derzeitige Niveau der Materialnutzung weder global verallgemeinerbar noch langfristig tragfähig ist, müsste die abiotische Materialnutzung Deutschlands (einschließlich der ungenutzten Entnahmen) um bis zu 80 Prozent bis 2050 reduziert werden.
In the future, the capacities of renewable SNG (synthetic natural gas) will expand significantly. Pilot plants are underway to use surplus renewable power, mainly from wind, for electrolysis and the production of hydrogen, which is methanated and fed into the existing gas pipeline grid. Pilot projects aim at the energetic use of SNG for households and transport in particular for gas fueled cars. Another option could be the use of SNG as feedstock in chemical industry.
The early stage of development raises the question of whether SNG should be better used for mobility or the production of chemicals. This study compares the global warming potential (GWP) of the production of fossil natural gas (NG) and carbon-dioxide (CO2)-based SNG and its use for car transport versus chemical use in the form of synthesis gas. Since the potential of wind energy for SNG production is mainly located in northern Germany, the consequences by a growing distance between production in the North and transport to the South of Germany are also examined.
The results indicate that CO2-based SNG produced with wind power would lead to lower GWP when substituting NG for both uses in either transport or chemical production. Differences of the savings potential occur in short-distance pipeline transport. The critical factor is the energy required for compression along the process chain.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
The paper reflects the hypothesis that those technological and institutional innovations survive which extend the safe operating range (SOR) of the Humans-Technologies-Institutions (HTI) system (e.g. companies, cities, regions and countries). The multidimensional SOR of a country comprises in particular safe livelihood, quality of life, security, monetary stability, supply security and quality of the environment. A "mechanism of progress" is described involving the search for higher safety and independence of constraints. With innovation and learning in a key role, the mechanism leads to a relative decoupling of resource use and economic value added and a growing share of knowledge generation in the economy. Competition of HTI systems for scarce resources may lead to independence strategies such as enhanced resource efficiency. It may also lead to cooperation of competing HTI systems facilitated by new institutions thus forming an HTI system at higher level of complexity. While the consortium could coordinate their resource consumption within the boundaries of safe operating space, the partner HTI systems would further expand their SOR. Data is provided that net resource importing countries have developed higher material productivity thus increasing their independence from resource supply, and countries with such capability have gained higher innovation capacity.
The bioeconomy is gaining growing attention as a perceived win-win strategy for environment and economy in the EU. However, the EU already has a disproportionately high global cropland footprint compared to the world average, and uses more cropland than domestically available to supply its demand for agricultural products. There is a risk that uncontrolled growth of the bioeconomy will increase land use pressures abroad. For that reason, a monitoring system is needed to account for the global land use of European consumption. The aim of this paper is to take a closer look at the tools needed to monitor global cropland footprints, as well as the targets needed to benchmark development. This paper reviews recent developments in land footprint accounting approaches and applies the method of global land use accounting to calculate the global cropland footprint of the EU-27 for the years between 2000 and 2011. It finds a slight decrease in per capita cropland footprints over the past decade (of around 1% annually, reaching 0.29 ha/cap in 2011) and advocates promoting a further decrease in per capita cropland requirements (of around 2% annually) to reach global land use targets for keeping consumption within the safe operating space of planetary boundaries by 2030. It argues that strategic land reduction targets may still go hand in hand with the growth of a smart, innovative and sustainable bioeconomy by reinforcing the need for policies that support greater efficiency across the life-cycle and reduce wasteful and excessive consumption practices. Recommendations for further improving land footprint accounting are given.
Im Auftrag des Bundesforschungsministeriums hat das Wuppertal Institut eine Studie zur systemischen Betrachtung und Modellierung der Bioökonomie erstellt. Sie zeigt Wege auf, die komplexen sozio-ökonomischen Zusammenhänge und Umweltauswirkungen der Bioökonomie zu erfassen und soll als Grundlage für den Aufbau eines kontinuierlichen Monitorings dienen. Die Autor(inn)en erfassten Indikatoren und Modellierungsmethoden mit Bezug zur Bioökonomie und weisen auf bestehende Lücken hin: Diese finden sich vor allem bei der Erfassung neuer technologiegetriebener Sektoren, der systemischen Betrachtung eines nachhaltigen Konsums und bei der Modellierung der Zusammenhänge zwischen Innovationen, Wirtschaftswachstum und Ressourcenverbrauch (insbesondere die Landnutzung).
Zur Umsetzung eines systemischen Monitorings empfiehlt die Studie das folgende Vorgehen: Unter Zuhilfenahme des DPSIR-Konzeptes (Analyse von Wirkungsbeziehungen nach Driving forces, Pressures, States, Impacts und Responses) sollten Schlüsselindikatoren und Nachhaltigkeitsziele in einem Indikatoren-"Dashboard" zusammengeführt werden. Benötigt wird zudem ein Werkzeugkasten von Methoden, der vor allem integrierte Analyse- und Bewertungsmodelle sowie ein systemisch konzipiertes Metamodell umfasst.
Many countries have started to develop policy programs for the sustainable use of natural resources. Indicators and targets can cover both a territorial and a life-cycle-wide global perspective. This article focuses on how a safe operating space for global material resource use can be outlined based on existing economy-wide material flow indicators. It reflects on issues such as scale and systems perspective, as the choice of indicators determines the target "valves" of the socio-industrial metabolism. It considers environmental pressures and social aspects of safe and fair resource use. Existing proposals for resource consumption targets are reviewed, partially revisited, and taken as a basis to outline potential target values for a safe operating space for the extraction and use of minerals and biomass by final consumption. A potential sustainability corridor is derived with the Total Material Consumption of abiotic resources ranging from 6 to 12 t/person, the Total Material Consumption of biotic resources not exceeding 2 t/person, and the Raw Material Consumption of used biotic and abiotic materials ranging from 3 to 6 t/person until 2050. For policy, a "10-2-5 target triplet" can provide orientation, when the three indicators are assigned values of 10, 2, and 5 t/person, respectively.
Ein sorgsamer Umgang mit natürlichen Ressourcen gehört zu den Kernthemen von Industrial Ecology. Mit der jeweiligen Betrachtungsebene, vom Unternehmen bis zur globalen Ebene, wechseln die Herausforderungen, Methoden und Lösungsansätze. Gibt es auch Indikatoren, die skalenübergreifend angewandt werden können?
The current flow of carbon for the production, use, and waste management of polymer-based products is still mostly linear from the lithosphere to the atmosphere with rather low rates of material recycling. In view of a limited future supply of biomass, this article outlines the options to further develop carbon recycling (C-REC). The focus is on carbon dioxide (CO2) capture and use for synthesis of platform chemicals to produce polymers. CO2 may be captured from exhaust gases after combustion or fermentation of waste in order to establish a C-REC system within the technosphere. As a long-term option, an external C-REC system can be developed by capturing atmospheric CO2. A central role may be expected from renewable methane (or synthetic natural gas), which is increasingly being used for storage and transport of energy, but may also be used for renewable carbon supply for chemistry. The energy input for the C-REC processes can come from wind and solar systems, in particular, power for the production of hydrogen, which is combined with CO2 to produce various hydrocarbons. Most of the technological components for the system already exist, and, first modules for renewable fuel and polymer production systems are underway in Germany. This article outlines how the system may further develop over the medium to long term, from a piggy-back add-on flow system toward a self-carrying recycling system, which has the potential to provide the material and energy backbone of future societies. A critical bottleneck seems to be the capacity and costs of renewable energy supply, rather than the costs of carbon capture.
Global warming, the overall extraction of minerals and the expansion of cultivated land for biomass harvest are growing globally. These "Big Three" represent key environmental pressures which may lead to a continuous degradation of the living environment, if not controlled at levels with acceptable low risk. The situation is complex, because countries and regions consume products which require resources such as minerals and land in various parts of the world. Nevertheless, it is possible to measure the global resource use which is associated with the domestic consumption. In order to inform policies at the national and supranational level whether it may be necessary to adjust the incentive framework for industry and households, reference data are needed to compare the status quo of their countries with what may be deemed acceptable at a global level. This chapter outlines a rationale for the derivation of possible long-term targets for total material consumption of abiotic materials (TMCabiot) and global land use for crops (GLUcropland). The indicated targets are expressed in tentative per capita values which may serve as a first orientation and basis for further debate and research.
Carbon recycling, in which organic waste is recycled into chemical feedstock for material production, may provide benefits in resource efficiency and a more cyclical economy - but may also create "trade-offs" in increased impacts elsewhere. We investigate the system-wide environmental burdens and cost associated with carbon recycling routes capable of converting municipal solid waste (MSW) by gasification and Fischer-Tropsch synthesis into ethylene. Results are compared to business-as-usual (BAU) cases in which ethylene is derived from fossil resources and waste is either landfilled with methane and energy recovery (BAU#1) or incinerated (BAU#2) with energy recovery. Monte Carlo and sensitivity analysis is used to assess uncertainties of the results. Results indicate that carbon recycling may lead to a reduction in cumulative energy demand (CED), total material requirement (TMR), and acidification, when compared to BAU#1. Global warming potential is found to be similar or slightly lower than BAU#1 and BAU#2. In comparison to BAU#2, carbon recycling results in higher CED, TMR, acidification, and smog potential, mainly as a result of larger (fossil-based) energy offsets from energy recovery. However, if a renewable power mix (envisioned for the future) is assumed to be offset, BAU#2 impacts may be similar or higher than carbon recycling routes. Production cost per kilogram (kg) MSW-derived ethylene range between US$1.85 and US$2.06 (Jan 2011 US$). This compares to US$1.17 per kg for fossil-based ethylene. Waste-derived ethylene breaks even with its fossil-based counterpart at a tipping fee of roughly US$42 per metric ton of waste feedstock.
This article presents the accounts of China's Total Material Requirement (TMR) during 1995–2008, which were compiled under the guidelines of Eurostat (2009) and with the Hidden Flow (HF) coefficients developed by the Wuppertal Institute. Subsequently, comparisons with previous studies are conducted. Using decomposition, we finally examine the influential factors that have changed the TMR of China. The main findings are the following: (1) During 1995–2008 China's TMR increased from 32.7 Gt to 57.0 Gt. Domestic extraction dominated China’s TMR, but a continuous decrease of its shares can be observed. In terms of material types, excavation constituted the biggest component of China's TMR, and a shift from biomass to metallic minerals is apparent; (2) Compared with two previous studies on China's TMR, the amounts of TMR in this study are similar to the others, whereas the amounts of the used part of TMR (Direct Material Input, DMI) are quite different as a result of following different guidelines; (3) Compared with developed countries, China's TMR per capita was much lower, but a continuous increase of this indicator can be observed; (4) Factors of Affluence (A) and Material Intensity (T), respectively, contributed the most to the increase and decrease of TMR, but the overall decrease effect is limited.
Nachhaltiges Ressourcen-Management : eine Herausforderung für die Politik und die Wissenschaft
(2013)
Die Bedeutung von Urban Mining nimmt zu, da das Wachstum der Technosphäre, insbesondere des Baubestandes abnimmt. In den kommenden Jahrzehnten wird in Deutschland regional differenziert ein Gleichgewicht zwischen Zu- und Rückbau erreicht werden. Dann wird ein erheblicher Teil des Materialbedarfs aus Recycling gedeckt werden können. Erste Kommunen wie die Stadt Zürich praktizieren ein integriertes Bestands- und Ressourcenmanagement. Auf nationaler Ebene laufen Untersuchungen zur Dynamik des Materiallagers. Die Entwicklung eines Informationssystems Urban Mining bedarf der Kooperation aller Beteiligten.
Vor dem Hintergrund des Klimawandels und der Verknappung fossiler Ressourcen haben nachwachsende Rohstoffe in den letzten Jahren an Bedeutung gewonnen. Insbesondere die Bioenergie hat durch staatliche Fördermaßnahmen viel Aufmerksamkeit erfahren. Mit der Ausweitung der energetischen Nutzung von Biomasse sollen Beiträge zum Klimaschutz durch die Vermeidung von Treibhausgasen geleistet, die Versorgungssicherheit soll durch Ersatz der knapper werdenden fossilen Ressourcen erhöht und der ländliche Raum gestärkt werden. Die selben Argumente lassen sich auch für die stoffliche Nutzung von Biomasse heranziehen. Auch wenn diese etwas aus dem Blickfeld der energiebezogenen Diskussion geraten ist, kann hier in den nächsten Jahren ein erhebliches Marktwachstum erwartet werden. Biomasse als erneuerbare Ressource kann in Land- und Forstwirtschaft aber nur begrenzt bereitgestellt werden. Dies gilt umso mehr, als bestimmte Nachhaltigkeits-Anforderungen eingehalten werden müssen. Der zu erwartenden Nachfragesteigerung für nachwachsende Rohstoffe (Nawaro) steht damit eine limitierte Verfügbarkeit entgegen. Aus dieser leitet sich die Forderung nach einer möglichst effizienten Verwertung ab. In diesem Zusammenhang fällt immer häufiger der Begriff der Kaskadennutzung von Nawaro als möglicher Lösungsansatz. Dieses Konzept kann im Wesentlichen als eine Hintereinanderschaltung von (mehrfacher) stofflicher und energetischer Nutzung desselben Rohstoffs gesehen werden und schafft so eine Verbindung von Material- und Energiesektor. Das Prinzip der Kaskadennutzung ist damit ein Ansatz zur Steigerung der Rohstoffeffizienz von nachwachsenden Rohstoffen und zur Optimierung der Flächennutzung. Das Ziel des vorliegenden Berichts ist es, die Option "Kaskadennutzung" strategisch, differenziert und ganzheitlich zu beleuchten. Im Rahmen der Projektarbeit sind daher Anforderungen an eine nachhaltige Kaskadennutzung von Nawaro abgeleitet und Schlussfolgerungen zu deren Ausgestaltung gezogen worden, um die Potenziale von Biomasse hochwertig und erfolgreich zu nutzen.
Global trade is increasingly being challenged by observations of growing burden shifting, in particular of environmental problems. This paper presents the first worldwide calculations of shifted burden based on material flow indicators, in particular direct and indirect physical trade balances. This study covers the period between 1962 and 2005 and includes between 82 and 173 countries per year. The results show that indirect trade flow volumes have increased to around 41 billion tonnes in 2005. The traded resources with the highest share of associated indirect flows are iron, hard coal, copper, tin and increasingly palm oil. Regarding the burden balance between regions, Europe is the biggest shifter whereas Australia and Latin America are the largest takers of environmental burden due to resource extraction. To evaluate the findings from a global perspective, the results are analysed in terms of resource flow induced environmental pressure related to a country's land area in terms of total and per capita area. Resource endowment and population density seem to be more relevant in determining the physical trade balance, including indirect flows, than income level.
Concerns over climate change and the security of industrial feedstock supplies have been opening a growing market for biobased materials. This development, however, also presents a challenge to scientists, policy makers, and industry because the production of biobased materials requires land and is typically associated with adverse environmental effects. This article addresses the environmental impacts of biobased materials in a meta-analysis of 44 life cycle assessment (LCA) studies. The reviewed literature suggests that one metric ton (t) of biobased materials saves, relative to conventional materials, 55 ± 34 gigajoules of primary energy and 3 ± 1 t carbon dioxide equivalents of greenhouse gases. However, biobased materials may increase eutrophication by 5 ± 7 kilograms (kg) phosphate equivalents/t and stratospheric ozone depletion by 1.9 ± 1.8 kg nitrous oxide equivalents/t. Our findings are inconclusive with regard to acidification (savings of 2 ± 20 kg sulfur dioxide equivalents/t) and photochemical ozone formation (savings of 0.3 ± 2.4 kg ethene equivalents/t). The variability in the results of life cycle assessment studies highlights the difficulties in drawing general conclusions. Still, common to most biobased materials are impacts caused by the application of fertilizers and pesticides during industrial biomass cultivation. Additional land use impacts, such as the potential loss of biodiversity, soil carbon depletion, soil erosion, deforestation, as well as greenhouse gas emissions from indirect land use change are not quantified in this review. Clearly these impacts should be considered when evaluating the environmental performance of biobased materials.
Resource-efficient construction : the role of eco-innovation for the construction sector in Europe
(2011)
Das Forschungsvorhaben startete im April 2008 vor Verabschiedung des Kabinettsberichts der Bundesregierung zur Deutschen Anpassungsstrategie an den Klimawandel (DAS). In der DAS wird die Bedeutung der Information über Erfordernisse zur Anpassung und der aktiven Einbindung aller gesellschaftlichen Gruppen in den weiteren Prozess der Strategieentwicklung betont. Das Forschungsvorhaben hat dazu Vorschläge für eine Einbeziehung gesellschaftlicher Gruppen über das Internet und zur Einbeziehung von stakeholdern über Dialog- und Kommunikationsprozesse gemacht. Diese Vorschläge basieren im Wesentlichen auf einer Interessenanalyse über Interviews mit Stakeholdern und der Wirtschaft zu deren Anforderungen und Erwartungen an die DAS. Daneben wurden internationale Beispiele zur Anpassung an den Klimawandel recherchiert und als "good practice" in einer Broschüre für die Öffentlichkeitsarbeit aufbereitet. Für die Internet-Plattform www.anpassung.net wurden in Form von Projektsteckbriefen konkrete Vorschläge zur interaktiven Ausgestaltung der Plattform entwickelt.Ziel des von Öko-Institut und Wuppertal Institut durchgeführten UFOPLAN-Vorhabens war es, für Deutschland zum Komplex Abfallvermeidung eine fundierte Datenbasis über bestehende Maßnahmen der öffentlichen Hand sowie über angewandte Instrumente auf kommunaler, Länder- und Bundesebene zu schaffen. Damit wurde zugleich eine Datenbasis für die Erstellung eines nationalen Abfallvermeidungsprogramms, welche die Mitgliedstaaten gemäß der novellierten Abfallrahmenrichtlinie bis 2013 erarbeiten müssen, geschaffen. Hierzu wurden die in Deutschland und im Ausland bestehenden Abfallvermeidungsmaßnahmen der öffentlichen Hand auf lokaler, regionaler, Landes- und Staatsebene tabellarisch dargestellt und entsprechend dem Ziel, der Ebene sowie einer qualitativen Bewertung ihrer Vermeidungswirkung, beschrieben, soweit Informationen hierfür vorliegen. Schließlich wurden neue staatliche Abfallvermeidungsmaßnahmen in der Literatur identifiziert und geeignete Benchmarks, soweit sie im Rahmen der Recherchen ermittelt wurden, beschrieben. Insgesamt wurden 296 Maßnahmen aus über 20 Ländern erfasst und erste Schlussfolgerungen für mögliche Schwerpunkte eines nationalen Abfallvermeidungsprogramms gezogen.
Development of scientific and technical foundations for a national waste prevention programme
(2010)
In a new waste hierarchy the amended EU Waste Framework Directive (WFD) (2008/98/EG) confirmed the prevention of waste as a priority measure to protect the environment with regard to the production and handling of waste. Amongst others the Member States are requested to promote waste prevention. According to article 29 par. 1 WFD the prevention measures have to be planned in terms of waste prevention programmes to be created by the Member States until December 12th 2013. These prevention programmes are to describe existing waste prevention measures and set waste prevention goals. The progress is to be monitored and assessed by targeting appropriate, specific qualitative or quantitative benchmarks for adopted waste prevention measures. The programmes may be included in waste management plans or other environmental programmes. By the objectives and measures of prevention programmes the environmental impacts associated with generation of waste shall be decoupled from economic growth.
Managing solid waste is one of the biggest challenges in urban areas around the world. Technologically advanced economies generate vast amounts of organic waste materials, many of which are disposed to landfills. In the future, efficient use of carbon containing waste and all other waste materials has to be increased to reduce the need for virgin raw materials acquisition, including biomass, and reduce carbon being emitted to the atmosphere therefore mitigating climate change. At end-of-life, carbon-containing waste should not only be treated for energy recovery (e.g. via incineration) but technologies should be applied to recycle the carbon for use as material feedstocks. Thermochemical and biochemical conversion technologies offer the option to utilize organic waste for the production of chemical feedstock and subsequent polymers. The routes towards synthetic materials allow a more closed cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. This chapter summarizes carbon-recycling routes available and investigates how in the long-term they could be applied to enhance waste management in both industrial countries as well as developing and emerging economies. We conclude with a case study looking at the system-wide global warming potential (GWP) and cumulative energy demand (CED) of producing high-density polyethylene (HDPE) from organic waste feedstock via gasification followed by Fischer–Tropsch synthesis (FTS). Results of the analysis indicate that the use of organic waste feedstock is beneficial if greenhouse gas (GHG) emissions associated with landfill diversion are considered.
Consumption of natural resources should not exceed sustainable levels. The increasing use of biofuels and to some extent biomaterials, on top of rising food and feed demands, is causing countries to use a growing amount of global land, which may lead to land use conflicts and the expansion of cropland and intensive cultivation at the expense of natural ecosystems. Selective product certification cannot control the land use change triggered by growing overall biomass consumption. We propose a comprehensive approach to account for the global land use of countries for their domestic consumption, and assess this level with regard to globally acceptable levels of resource use, based on the concept of safe operating space. It is shown that the European Union currently uses one-third more cropland than globally available on a per capita basis and that with constant consumption levels it would exceed its fair share of acceptable resource use in 2030. As the use of global forests to meet renewable energy targets is becoming a concern, an approach to account for sustainable levels of timber flows is also proposed, based on the use of net annual increment, exemplified with preliminary data for Switzerland. Altogether, our approach would integrate the concept of sustainable consumption into national resource management plans; offering a conceptual basis and concrete reference values for informed policy making and urging countries to monitor and adjust their levels of resource consumption in a comprehensive way, respectful of the limits of sustainable supply.
As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.
This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.
Overviewing the European carbon (C), greenhouse gas (GHG), and non-GHG fluxes, gross primary productivity (GPP) is about 9.3 Pg yr-1, and fossil fuel imports are 1.6 Pg yr-1. GPP is about 1.25% of solar radiation, containing about 360 × 1018 J energy - five times the energy content of annual fossil fuel use. Net primary production (NPP) is 50%, terrestrial net biome productivity, NBP, 3%, and the net GHG balance, NGB, 0.3% of GPP. Human harvest uses 20% of NPP or 10% of GPP, or alternatively 1‰ of solar radiation after accounting for the inherent cost of agriculture and forestry, for production of pesticides and fertilizer, the return of organic fertilizer, and for the C equivalent cost of GHG emissions. C equivalents are defined on a global warming potential with a 100-year time horizon. The equivalent of about 2.4% of the mineral fertilizer input is emitted as N2O. Agricultural emissions to the atmosphere are about 40% of total methane, 60% of total NO-N, 70% of total N2O-N, and 95% of total NH3-N emissions of Europe. European soils are a net C sink (114 Tg yr−1), but considering the emissions of GHGs, soils are a source of about 26 Tg CO2 C-equivalent yr-1. Forest, grassland and sediment C sinks are offset by GHG emissions from croplands, peatlands and inland waters. Non-GHGs (NH3, NOx) interact significantly with the GHG and the C cycle through ammonium nitrate aerosols and dry deposition. Wet deposition of nitrogen (N) supports about 50% of forest timber growth. Land use change is regionally important. The absolute flux values total about 50 Tg C yr-1. Nevertheless, for the European trace-gas balance, land-use intensity is more important than land-use change. This study shows that emissions of GHGs and non-GHGs significantly distort the C cycle and eliminate apparent C sinks.
The physical dimension of international trade. Part 1: Direct global flows between 1962 and 2005
(2010)
The physical dimension of international trade is attaining increased importance. This article describes a method to calculate complete physical trade flows for all countries which report their trade to the UN. The method is based on the UN Comtrade database and it was used to calculate world-wide physical trade flows for all reporting countries in nine selected years between 1962 and 2005. The results show increasing global trade with global direct material trade flows reaching about 10 billion tonnes in 2005, corresponding to a physical trade volume of about 20 billion tonnes (adding both total imports and total exports). The share from European countries is declining, mainly in favour of Asian countries. The dominant traded commodity in physical units was fossil fuels, mainly oil. Physical trade balances were used to identify the dominant resource suppliers and demanders. Australia was the principal resource supplier over the period with a diverse material export structure. It was followed by mainly oil-exporting countries with varying volumes. As regards to regions, Latin America, south-east Asian islands and central Asia were big resource exporters, mostly with increasing absolute amounts of net exports. The largest net importers were Japan, the United States and single European countries. Emerging countries like the "Asian Tigers" with major industrial productive sectors are growing net importers, some of them to an even higher degree than European countries. Altogether, with the major exception of Australia and Canada, industrialized countries are net importers and developing countries and transition countries are net exporters, but there are important differences within these groups.
Comparative analysis of environmental impacts of maize-biogas and photovoltaics on a land use basis
(2010)
This study aims to stimulate the discussion on how to optimize a sustainable energy mix from an environmental perspective and how to apply existing renewable energy sources in the most efficient way. Ground-mounted photovoltaics (PV) and the maize-biogas-electricity route are compared with regard to their potential to mitigate environmental pressure, assuming that a given agricultural area is available for energy production. Existing life cycle assessment (LCA) studies are taken as abasis to analyse environmental impacts of those technologies in relation to conventional technology for power and heat generation. The life-cycle-wide mitigation potential per area used is calculated for the impact categories non-renewable energy input, green house gas (GHG) emissions, acidification and eutrophication. The environmental performance of each system depends on the scenario that is assumed for end energy use (electricity and heat supply have been contemplated). In all scenarios under consideration, PV turns out to be superior to biogas in almost all studied impact categories. Even when maize is used for electricity production in connection with very efficient heat usage, and reduced PV performance is assumed to account for intermittence, PV can still mitigate about four times the amount of green house gas emissions and non-renewable energy input compared to maize-biogas. Soil erosion, which can be entirely avoided with PV, exceeds soil renewal rates roughly 20-fold on maize fields. Regarding the overall Eco-indicator 99 (H) score under most favourable assumptions for the maize–biogas route, PV has still a more than 100% higher potential to mitigate environmental burden. At present, the key advantages of biogas are its price and its availability without intermittence. In the long run, and with respect to more efficient land use, biogas might preferably be produced from organic waste or manure, whereas PV should be integrated into buildings and infrastructures.
The global land area required to meet the German consumption of agricultural products for food and non-food use was quantified, and the related greenhouse gas (GHG) emissions, particularly those induced by land-use changes in tropical countries, were estimated. Two comprehensive business-as-usual scenarios describe the development corridor of biomass for non-food use in terms of energetic and non-energetic purposes. In terms of land use, Germany was already a net importer of agricultural land in 2004, and the net additional land required by 2030 is estimated to comprise 2.5–3.4 Mha. This is mainly due to biofuel demand driven by current policy targets. Meeting the required biodiesel import demand would result in an additional GWP of 23–37 Tg of CO2 equivalents through direct and indirect land-use changes. Alternative scenario elements outline the potential options for reducing Germany's land requirement, which reflect future global per capita availability.
On the one hand, biofuels may provide environmental and social benefits, for instance, when local communities in developing countries are supplied with power and process energy from oil producing plants, in particular when they are grown on land which is not suited for food production. On the other hand, the ongoing expansion of large scale energy farming for transport biofuels can lead to various environmental and social problems. Corn production for ethanol (additive to petrol) for instance resulted in nutrient pollution of the Mississippi basin and the Gulf of Mexico. The growing demand of transport biofuels in Europe can only be met by increasing imports. This contributes to the conversion of grasslands, savannahs and forests in the tropics, losses of biodiversity and additional green house gas emissions. Even if the use of biomass for other purposes, for instance, the combined production of electricity and heat usually provides a better greenhouse gas balance than transport biofuels, energy cropping remains problematic for various reasons. Whereas, when biomass is used for material purposes first, and the energy is recovered from the subsequent waste, a multiple dividend can be gained. The authors address a number of measures for improvement. They also recommend that in view of the complex circumstances of biofuel production and application, current policy mandates and targets for biofuels should be reconsidered. Biomass policies need to be integrated into a broader perspective of sustainable resource management.
Sustainable Resource Management is the result of longlasting exhaustive research by the Wuppertal Institute. Looking at material flows, industrial and societal metabolism and their implications for the economy, this new book provides radical perspectives on how the global economy should use natural resources in intelligent ways that maximise well-being without destroying lifesupporting ecosystems. It presents a vision of the future and the fundamental elements necessary for the sustainable management of the Earth's resources. It argues that the need to manage the use of our natural resources at a sustainable level can be shaped into a great opportunity for innovation and for new institutions to govern change.
A model of the use of the platinum group metals (PGMs) platinum, palladium, and rhodium in Europe has been developed and combined with a model of the environmental pressures related to PGM production. Compared to the base case presented in Part I of this pair of articles, potential changes in PGM production and use are quantified with regard to cumulative and yearly environmental impacts and PGM resource use, for the period 2005–2020. Reducing sulfur dioxide (SO2) emissions of PGM producer Norilsk Nickel could cut the cumulative SO2 emissions associated with the use of PGMs in Europe by 35%. Cleaner electricity generation in South Africa could reduce cumulative SO2 emissions by another 9%. Increasing the recycling rate of end-of-life catalytic converters to 70% in 2020 could save 15% of the cumulative primary PGM input into car catalysts and 10% of the SO2 emissions associated with PGM production. In 2020, PGM requirements and SO2 emissions would be, respectively, 40% and 22% lower than the base case. Substituting palladium for part of the platinum in diesel catalysts, coupled with a probable palladium price increase, could imply 15% more cumulative SO2 emissions if recycling rates do not increase. A future large-scale introduction of fuel cell vehicles would require technological improvements to significantly reduce the PGM content of the fuel cell stack. The basic design of such vehicles greatly influences the vehicle power, a key parameter in determining the total PGM requirement.
World primary copper production is expected to increase due to growing demand. Reflecting the geographical divergence of copper deposits and demanding industries, copper is produced by various production paths, differing in regional and technological aspects and related environmental pressures. For the mitigation of environmental pressures related to global material flows and a more sustainable resource management, policy makers, producers and buyers require information on regional resource efficiencies and effects of the key processes within the global production chain. This study quantifies material flows of refined copper production and environmental pressures along the pyro‐ and hydrometallurgical paths for Chile and Germany. Inventories for involved unit processes are distinguished by region and most commonly applied technologies, including electric power supply. Different production paths are compared by environmental pressure indicators (primary energy requirements, total material requirements, water consumption, GHG emissions, solid waste disposal, sulphur dioxide and arsenic emissions). Alternative options for improvement of technologies and supply patterns in Chile and Germany are compared.
In this article, we analyze flows of the platinum group metals (PGMs) platinum, palladium, and rhodium and the environmental impacts associated with their supply in Europe. A model of the use of PGMs in Europe has been developed, and this is combined with a model of environmental pressures related to PGM production. Seven industrial sectors and product groups form the main users of PGMs in Europe, comprising the chemical, petroleum, and glass industries; jewelry, dentistry, electronic equipment, and car catalysts. Most relevant environmental impacts of secondary production in Europe and primary PGM production in South Africa, Russia, and Canada are taken into account, including emissions of sulphur dioxide and carbon dioxide and total material requirement. The article quantifies the PGM flows to, from, and within Europe in 2004. The automotive industry is the single largest user of primary PGMs, and catalytic converters represent the major PGM end use. The chemical and glass industries also require large amounts of PGM but rely mostly on secondary metals. The environmental impacts of primary production exceed those of secondary production by far. An analysis of the use of car catalytic converters shows that as a result of efforts to reduce air pollutant emissions in Europe, other negative environmental impacts, such as point-source pollution and mining waste, are occurring elsewhere - for example, at extraction and refining sites in Siberia and South Africa.
This article introduces elements of a global governance regime for sustainable resource management. It argues that such an approach is needed to combat the negative impacts arising from resource extraction and use as well as to overcome the co‐ordination problems of decentralized action. A first section summarizes main conflicts arising from limited access to natural resources and security of supply, environmental impacts and the performance of resource‐rich developing countries. A second section analyses existing initiatives for sustainable resource management such as resource funds, efforts to increase transparency, programmes in development co‐operation, standards and certification, material efficiency and resource productivity as well as efforts to limit the consumption of natural resources. Though these initiative have their merits, the article concludes that more systematic institutional mechanisms are needed. The third section introduces those institutional mechanisms: it describes the International Panel for Sustainable Resource Management (launched in November 2007), outlines elements of an international convention on sustainable resource management, develops the agenda for an international agency on the issue and discusses the interaction with existing international bodies such as the World Trade Organization. Written as a policy paper, the paper formulates proposals for various actors, from small‐scale miners to large‐scale global companies and governments. Its intention is to stimulate the debate and to broaden the horizon on the global dimension of using minerals.
The Wuppertal Institute for Climate, Environment and Energy and the UNEP/Wuppertal Institute Collaborating Centre on Sustainable Consumption and Production (CSCP) set out to analyse Japanese dematerialisation and resource efficiency strategies within the 3R scope and searched for options of enhancing resource effi ciency strategies, commissioned by the German Federal Environment Agency. A further task of the project was to initiate a policy dialogue including stakeholders, academia, politics and Japanese and European environmental experts. The following paper summarises findings from the analyses, the results of the policy dialogues (Experts Workshop, 6 June 2007 and International Conference, 6 November 2007) and draws conclusions for a potential Japanese-European cooperation on the resource efficiency issue.
Globales Ressourcenmanagement : Konfliktpotenziale und Grundzüge eines Global Governance-Systems
(2007)
The enhanced use of biomass for the production of energy, fuels, and materials is one of the key strategies towards sustainable production and consumption. Various life cycle assessment (LCA) studies demonstrate the great potential of bio-based products to reduce both the consumption of non-renewable energy resources and greenhouse gas emissions. However, the production of biomass requires agricultural land and is often associated with adverse environmental effects such as eutrophication of surface and ground water. Decision making in favor of or against bio-based and conventional fossil product alternatives therefore often requires weighing of environmental impacts. In this article, we apply distance-to-target weighing methodology to aggregate LCA results obtained in four different environmental impact categories (i.e., non-renewable energy consumption, global warming potential, eutrophication potential, and acidification potential) to one environmental index. We include 45 bio- and fossil-based product pairs in our analysis, which we conduct for Germany. The resulting environmental indices for all product pairs analyzed range from -19.7 to +0.2 with negative values indicating overall environmental benefits of bio-based products. Except for three options of packaging materials made from wheat and cornstarch, all bio-based products (including energy, fuels, and materials) score better than their fossil counterparts. Comparing the median values for the three options of biomass utilization reveals that bio-energy (-1.2) and bio-materials (-1.0) offer significantly higher environmental benefits than bio-fuels (-0.3). The results of this study reflect, however, subjective value judgments due to the weighing methodology applied. Given the uncertainties and controversies associated not only with distance-to-target methodologies in particular but also with weighing approaches in general, the authors strongly recommend using weighing for decision finding only as a supplementary tool separately from standardized LCA methodology.
Global resource management : conflict potential and characteristics of a global governance regime
(2007)
The paper reviews the current knowledge on the use of biomass for non-food purposes, critically discusses its environmental sustainability implications, and describes the needs for further research, thus enabling a more balanced policy approach. The life-cylce wide impacts of the use of biomass for energy and material purposes derived from either direct crop harvest or residuals indicate that biomass based substitutes have a different, not always superior environmental performance than comparable fossil based products. Cascading use, i.e. when biomass is used for material products first and the energy content is recovered from the end-of-life products, tends to provide a higher environmental benefit than primary use as fuel. Due to limited global land resources, non-food biomass may only substitute for a certain share of non-renewables. If the demand for non-food biomass, especially fuel crops and its derivates, continues to grow this will inevitably lead to an expansion of global arable land at the expense of natural ecosystems such as savannas and tropical rain forests. Whereas the current aspirations and incentives to increase the use of non-food biomass are intended to counteract climate change and environmental degradation, they are thus bound to a high risk of problem shifting and may even lead to a global deterioration of the environment. Although the "balanced approach" of the European Union's biomass strategy may be deemed a good principle, the concrete targets and implementation measures in the Union and countries like Germany should be revisited. Likewise, countries like Brazil and Indonesia may revisit their strategies to use their natural resources for export or domestic purposes. Further research is needed to optimize the use of biomass within and between regions.
Policies for Sustainable Use and economy-wide Management of natural Resources (SUMR) throughout the production and consumption system are faced with environmental and socio-economic requirements and regulatory constraints. Based on empirical findings of ongoing trends of resource use, decoupling from economic growth, and transregional problem shifting, the paper outlines a potentially sustainable biophysical basis for production and consumption in the EU. It discusses the main challenges for the major resource groups, describing the specific and the common tasks with regard to biomass, fossil fuels, metals, non-metallic minerals. Adopting a medical metaphor, it suggests that policies for SUMR should follow a dual approach reflecting the long-term need for a main cure of the socio-industrial metabolism in form of a "conditioning" towards a more mature, resource efficient, and renewables based constitution on the one hand, and a fine tuning of selected material flows (e.g. for optimized recycling and control of hazardous compounds) on the other hand. Both strategies are deemed complementary and necessary to reduce environmental impacts and increase the utility of material use. Action required is exemplified with regard to the three pillars of SUMR, i.e. improved orientation, information and incentives.
Objective of this study is to support the development of a Thematic Strategy for Sustainable Use and Management of Resources through the provision of background information, in particular "an estimate of materials and waste streams in the Community, including imports and exports" (Article 8 a 6th EAP) using the method of material flow accounting. It further presents first ideas on how the resource use pattern of the EU can be assessed with regards to priority setting for possible policy measures.
By referring to the concept of Industrial Metabolism, resources are defined in a broad sense, embracing the source and sink function of the natural environment, i.e. the provision of raw materials and land, and the absorption of residual materials (waste and emissions). Environmental impacts are associated not only with the extraction, harvesting and catching of raw materials but also with the subsequent production, use and disposal of products and goods. It is the total of environmental impacts associated with the entire life cycle of raw materials which has to be considered.
Three generic "management rules" for the sustainable use and management of renewable and non-renewable natural resources are presented and discussed which have been formulated by several political institutions based on scientific literature:
1. The use of renewable resources should not exceed their renewal and/or regeneration rates.
2. The use of non-renewable resources should not exceed the rate at which substitutes are developed (should be limited to levels at which they can either be replaced by physically or functionally equivalent renewable resources or at which consumption can be offset by increasing the productivity of renewable or non-renewable resources).
3. Outputs of substances to the environment (pollution) should not exceed the assimilative capacity of environmental media ("absorption capacities").
Der vorliegende Artikel vergleicht die Nutzung nachwachsender Rohstoffe zur Erzeugung von Energie (Wärme und Elektrizität), Kraftstoffen und Gebrauchsprodukten anhand von vier ausgewählten Umweltbelastungskategorien. Dazu wurden Ökobilanzdaten aus 11 verschiedenen Publikationen für insgesamt 45 Produktpaare auf Basis nachwachsender und fossiler Rohstoffe analysiert und bezogen auf Einwohneräquivalente pro Hektar landwirtschaftliche Fläche miteinander verglichen. Die Ergebnisse zeigen im Allgemeinen Vorteile für die nachwachsenden Produktalternativen in den Kategorien Nichterneuerbarer Energieverbrauch und Treibhauspotenzial, während Produkte aus fossilen Ausgangsstoffen beim Eutrophierungspotenzial günstiger abschneiden und sich in der Kategorie Versauerungspotenzial uneinheitliche Resultate ergeben. Durch die Nutzung nachwachsender Rohstoffe zur Erzeugung von Gebrauchsgütern und Energie lassen sich durch Substitution der fossilen Produktalternativen größere ökologische Entlastungen realisieren als durch die Herstellung von Biokraftstoffen, die als Vollsubstitute für Diesel eingesetzt werden. Wesentliche Nachteile der Biomassenutzung sind mit dem Pflanzenanbau im Rahmen der konventionellen Landwirtschaft verbunden. Durch andere Bewirtschaftungsformen (z. B. Extensivierung) und eine besser an die jeweiligen Verwendungszwecke angepasste Auswahl bzw. Verarbeitung der nachwachsenden Rohstoffe könnten die Umweltbelastungen durch Energie, Kraftstoffe und Gebrauchsprodukte aus nachwachsenden Rohstoffen deutlich verringert werden.
Resource flows constitute the materials basis of the economy. At the same time, they carry and induce an environmental burden associated with resource extraction and the subsequent material flows and stocks, which finally end up as waste and emissions. A reduction of this material throughput and the related impacts would require a reduction of resource inputs. And breaking the link between resource consumption and economicgrowth would require an increase in resource productivity. Material flow analysis (MFA) can be used to quantify resource flows and indicate resource productivity. In this article, we study the available empirical evidence on the actual (de-)linkage of material resource use and economic growth. We compare resource use with respect to total material requirement (TMR) and direct material input (DMI) for 11 and 26 countries, respectively, and the European Union (EU-15). The dynamics of TMR, as well as of the main components are analysed in relation to economic growth in order to show whether there is a decoupling (relative or absolute) from GDP and a change of the metabolic structure in the course of economicdevelopment. DMI/cap so far only decoupled from GDP/cap in relative terms; that is, in most countries, it reached a rather constant level but - with the exception of Czech Republic - showed no absolute decline yet. TMR/cap was reduced in two high-income countries and one low-income country due to political influence. Changes in TMR were more influenced by hidden flows (HF) than by DMI. We analyse the dynamics of the structure and composition of TMR in the course of economic development. In general, the economic development of industrial countries was accompanied by a shift from domestic to foreign resource extraction. Different relations can be discovered for the share of biomass, fossil fuel resources, construction resources and metals and industrial minerals.
Bridging the data gap
(2004)
This paper examines the connection between globalisation, with its growth in world trade links, and certain ecological effects especially concerning "North-South" relations. Although world trade in the mid-nineties was significantly uncoupled from growth trends in the world economy, so that since then it has increased nearly three times faster than the global GDP, certain indicators of energy use and CO2 emissions have not developed proportionately to world trade; globalisation evidently does not lead to a situation where pressures on the environment are increasing to the same extent worldwide. This de-linking may, however, result in the kind of shifts that we examine here with reference to the material trade flows of the European Union. It will be shown that, in the course of globalisation, the countries of the EU have increasingly shifted environmental burdens on to the countries of the South, especially in the form of ecological rucksacks of imported raw materials, while at the same time reducing the pressure on their own domestic environment by extracting fewer material resources. Furthermore, goods whose production places intensive pressure on the environment (industrial emissions into the atmosphere and water, heavy metal emissions, etc.) have been increasingly imported from newly industrializing or developing countries. The greater covering of material requirements from foreign resources has served not so much the EU's internal consumption as its own production of export goods; this shows that the EU has an increasing share in the resource requirement of other economies. The paper concludes that it is absolutely necessary to consider the international dimension in any strategy for more productive use of resources in industrial countries. In the long term, the EU's resource use should also be reduced in absolute terms. This will also be necessary in order to reduce the pressure on the environment due to imports and exports.
Wir wollen auf den Mars und sollten doch zuerst einmal auf der Erde landen. Hier warten ungelöste ökologische und ökonomische Probleme auf Lösungen. Stefan Bringezu lässt seine Leser gedanklich auf dem Planeten Erde neu landen. Dabei tauchen Fragen auf: Wie viel Verbrauch verträgt der Planet? Wo greift die Menschheit in natürliche Stoffströme ein, welche zusätzlichen Stoffströme setzt sie in Bewegung und welche Folgen haben diese? Menschliche Gesellschaft und Natur werden zu zwei komplexen Systemen, von denen das eine - die Gesellschaft - an das andere auf Gedeih und Verderb gekoppelt ist. Der Mensch ist in der Lage, seinen "Stoffwechsel" mit der Natur zu optimieren. Wie dieser gemessen werden kann und welche Lösungsansätze es bereits gibt, zeigt dieses Buch. Auch künftig wird es uns möglich sein, gut zu leben und zu wirtschaften, wenn wir den Verbrauch natürlicher Ressourcen nachhaltig gestalten.
Material flows induced by national economies can be regarded as indirect pressure indicators for environmental degradation. Economy-wide material flow analysis and indicators have been designed to monitor material and energy flows at the macroeconomic level and to provide indicators, which could contribute to management of resourceuse and output emission flows from both economic, environmental and broader sustainability points of view. These indicators can serve various purposes including monitoring the material basis of national economies and related environmental pressures, assessment of the material and resource productivity and monitoring the implications of trade and globalisation.
The main part of this paper compares the material and resourceuse of the Czech Republic, Germany and the EU-15 by means of DMI and TMR indicators over the period of 1991–2004 (1991–2000 for EU-15). At the aggregate level both indicators in all three economies do not show any clear decreasing or increasing trends over the period considered. This means that environmental pressure related to use of materials for production and consumption purposes remains rather stable. All the economies however, recorded an increase in the efficiency of transforming the material/resource inputs into economic output. The analysis further revealed that most of the dynamics of DMI and TMR in the Czech Republic tended towards a higher similarity with Germany and the EU-15. In the future, further decreases in DMI as well as in TMR of fossils fuels might be expected in the Czech Republic, which could be counteracted by increase in DMI and TMR of metal ores/metal resources and non-metallic minerals/non-metallic resources. The future development of total DMI, TMR and material/resource intensity in both the Czech Republic and Germany will depend on further shifts to less material intensive industries and services and on increasing material efficiency in production and consumption of particular products. This is not only a technological, but also a social challenge, as there are barriers in current mode of governance and in shaping of current economic and social systems to do so.