Refine
Document Type
- Report (33)
- Peer-Reviewed Article (27)
- Working Paper (7)
- Part of a Book (5)
- Conference Object (4)
- Doctoral Thesis (2)
- Contribution to Periodical (1)
Language
- English (79) (remove)
Division
- Kreislaufwirtschaft (79) (remove)
Treating waste as a resource and the design of a circular economy have been identified as key approaches for resource efficiency. Despite ambitious targets, policies and instruments that would enable a transition from a conventional waste management to an integrated and comprehensive resource management are still missing. Moreover, this will require innovative policy mixes which do not only address different end-of-pipe approaches but integrate various resource efficiency aspects from product design to patterns of production and consumption. Based on the results of a project funded by the Seventh Framework Programme for Research and Technological Development named "POLFREE - Policy Options for a resource efficient economy", this paper addresses several aspects of the conceptualization of policy mixes with regard to waste as a specific resource efficiency challenge. The guiding research interest of this paper is the combination of policies necessary to create a full circular economy. In a first step, the present waste policy frameworks, institutions and existing incentives at national level are examined in order to disclose regulatory and policy gaps. Based on this, the second part of the paper describes and analyses specific waste-related resource efficiency instruments with regard to their potential impacts under the constraints of various barriers. Based on the assessment of the country analyses and the innovative instruments, the paper draws conclusions on waste policy mixes and political needs.
To minimize the impact of end-of life vehicles on the environment they have to be managed in accordance with the legal requirements. Against this background it is important to comprehend the whereabouts of permanently decommissioned passenger cars. From the available statistical sources it was only possible to account for the whereabouts in parts for the last years. The subject-matter of the research project was the closure of this "statistical gap" to the maximum extent possible. The objectives of the project were the identification of the possible reasons underlying the "statistical gap", the determination, itemisation and, to the maximum extent possible, quantification of information on the actual whereabouts of permanently decommissioned vehicles and the development of measures and instruments that can be used to permanently improve the data situation.
The paper undertakes a closer look on the relation of institutions and policy mixes within the multi-level scope of the European Union in the policy field of resource efficiency and maps out different configurations. Based on an extensive analysis of scope, foci, instruments and especially the distribution of institutional responsibilities in 32 EU countries, the paper aims to amplify the categorisation of policy mix characteristics developed by Rogge and Reichardt by considerations on the institutional background of policy mixes. It specifically brings into question the potential impact of different institutional settings on the consistency and coherence of approaches in this evolving policy field. Resource efficiency is an eminently cross-cutting policy concept and a specific interesting unit of analysis due to the observable heterogeneity of implementation approaches. However, it is still mainly disconnected from energy issues and, at the same time, EU policy has shifted to the circular economy approach, indicating further need for streamlining with the resource efficiency approach. The paper stresses the need to include institutional and multi-level governance issues for policy design and the development of policy mixes, especially in the context of the now refocused resource efficiency agenda to the transition to a circular economy.
Stepping up waste prevention : challenges and opportunities for national waste prevention programmes
(2017)
Facing an ever-increasing global consumption of natural resources and related environmental as well as socioeconomic challenges, the transition towards a circular economy will be of crucial importance. The issue is high on the political agenda, especially since the European Commission published its Circular Economy Action Plan in December 2015. Apparently different stakeholders have very different perceptions of the concept as well as different expectations for its implementation. During a workshop series by the Friedrich Ebert Stiftung, experts from policy, science, administration, industry and unions discussed key issues for the circular economy: What's the status quo in Germany? How can the circular economy be implemented in a comprehensive and efficient way? Which instruments are available? Is the legal framework on EU and national level sufficient for the evolvement of a circular economy? What is the role of the consumer? What are the economic potentials especially with regard to job creation? How can research and innovation policy contribute to this process? This paper aims to summarise the different discussions.
Germany's waste management system is one of the world's most advanced - its primary objective is to dispose of waste in a way that is safe for both people and the environ- ment. However, only about 14 per cent of the raw materials used in industry are derived from recycling processes; the remainder are still sourced from primary materials. The circular economy is not yet being implemented on a large enough scale. Recyclates or recycled materials, i.e. secondary raw materials recovered from waste, are being fed back into production and usage processes at volumes that are far below what is possible. If this system were to be improved, loss of value, dependence on volatile commodity markets, lower resource productivity, and externalities in the form of environmental pollution could be avoided. A drive towards digitalisation in industry and the waste management sector could make this happen. A study by the German Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB) indicates that no other lead market in the environmental sector stands to benefit from digitalisation more than the circular economy - and that, at the same time, no sector has ever been so poorly positioned.
The contribution of the EU bioeconomy to sustainable development depends on how it is implemented. A high innovation potential is accompanied by considerable risks, in particular regarding the exacerbation of global land use conflicts. This article argues that a systemic monitoring system capable of connecting human-environment interactions and multiple scales of analysis in a dynamic way is needed to ensure that the EU bioeconomy transition meets overarching goals, like the Sustainable Development Goals. The monitoring should be centered around a dashboard of key indicators and targets covering environmental, economic, and social aspects of the bioeconomy. With a focus on the land dimension, this article examines the strengths and weakness of different economic, environmental and integrated models and methods for monitoring and forecasting the development of the EU bioeconomy. The state of research on key indicators and targets, as well as research needs to integrate these aspects into existing modeling approaches, are assessed. The article concludes with key criteria for a systemic bioeconomy monitoring system.
Renewable energy targets in the European Union (EU) have raised the demand for timber and are expected to increase dependence on imports. However, EU timber consumption levels are already disproportionally high compared to the rest of the world. The question is, how much timber is available for the EU to sustainably harvest and import, in particular considering sustainable forest management practices, a safe operating space for land-system change, and the global distribution of "common good" resources. This article approaches this question from a supply angle to develop a reference value range for the current as well as future sustainable supply of timber at the EU-27 and global levels. For current supply estimates, national-level data on forest area available for wood supply, productivity in that area, as well as the rate available for harvest were collected and aggregated into three potential supply scenarios. For future supply estimates, a safe operating space scenario halting land use change, a sensitivity analysis, and a literature review were performed. To provide both a comparison of global versus EU sustainable supply capacities and to develop a benchmark toward evaluating and comparing levels of consumption to sustainable supply capacities, per capita calculations were made. Results revealed that the per capita sustainable supply potential of EU forests is estimated to be around three times higher than the global average in 2050. Whether a global or EU reference value is more appropriate for EU policy orientation, considering both strengthened economic and cultural ties to the forest in forest-rich countries as well as the need to prevent problem shifting associated with exporting land demands abroad, is discussed. Further research is needed to strengthen and harmonize data, improve methods for modeling future scenarios and incorporate interdisciplinary and multi-stakeholder perspectives toward the development of robust and politically relevant reference values for sustainable consumption levels.
This report is a deliverable of the project "Bridging the raw materials knowledge gap for reuse and remanufacturing professionals" (ReUK) and of the second work package "Identification of knowledge gaps and industry needs". Funded by the Knowledge and Innovation Community for Raw Materials, ReUK will develop life-long education services tailor-made for the needs of the reuse- and remanufacturing sector in Europe. The present "Report on ten knowledge gaps" represents a further key step in delivering these services.
This report examines the role of waste management in the context of a circular economy transition. Key challenges relate to moving beyond the perception of "waste as a problem" to "waste as a resource". To this end high levels of cooperation are needed between the waste industry and enterprises engaged in circular economy business models. Collecting high quality waste streams for re-use, remanufacturing and recycling also requires citizen engagement and integrated infrastructure development from the municipal to the EU level. Ultimately, both waste prevention as well as a widespread growth in circular economy activities will require a coherent and holistic approach that takes recovery options into account at every stage of the product life cycle. Co-benefits will include reducing environmental burden as well as creating both high-skilled and low-skilled jobs for an inclusive, green economy. In concrete terms, this report examines five waste streams identified in the EU's Circular Economy Action Plan: municipal waste, packaging waste, food waste, bio-waste and critical raw materials. It looks at the current state of policy development, presents trends and data comparing Member State performance, reviews the state of technological development, and assesses employment opportunities relevant to each waste stream in the overarching context of assessing progress toward the circular economy transition in the EU. Case studies of specific options for collecting and treating waste based on experiences in Denmark, Italy and Slovenia complement the more macro-level analysis of trends. Finally, key policy options are identified, in particular focused on ways to prevent waste, align circular economy and waste management objectives and improve the quality and reliability of indicators toward more robust monitoring.
The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption - e.g., toward forest footprints - and developing reference values for benchmarking sustainability - e.g., toward land use targets - in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis) and demand (how much is used on a per capita basis, considering the concept of fair shares). To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.
Assessing global resource use : a systems approach to resource efficiency and pollution reduction
(2017)
Against the background of the question which role tax based instruments have to play in policy mixes to counteract the unbroken growth trend of global resource use, this chapter initially describes how the insights from a country comparative study on national resource policy frameworks could be linked to instruments for the internalisation of external environmental costs on a European scale. On the basis of a project specific but substantiated resource use vision and potential governance principles for three transition processes to reach the goals, the tax concepts are subsequently connected to simulation scenarios in order to illustrate the resource impacts that could be achieved by those policy reforms. Conclusively, barriers to such fundamental changes of framework conditions are briefly reflected upon and some conclusions are drawn.
The growing demand for timber, in particular for renewable energy, increases pressures on global forests and requires a robust monitoring system to ensure sustainability. This article takes a first step toward more systemic monitoring by asking how the global use of forests by EU consumers can be accounted for. Specifically, this article builds on and develops the method of global land use accounting to account for the EU-27's consumption of primary timber between 2002 and 2011 in terms of both volume and forest area. It assesses international trade flows for around 100 commodities and converts them into a volume of primary raw timber based on conversion values. Results reveal that both imports and exports increased over the assessed time period, with primary EU-27 timber estimated to be around 1 m3/cap in 2011. Gaps, uncertainty and a lack of harmonization regarding especially trade data and conversion values are key challenges to further improving the robustness of the method and reliability of results. Future research may focus on improving the method to address in particular recycled and recovered flows as well as the question of whether area or volume is the most appropriate metric for further development of a forest footprint indicator.
Digital platforms may yield a host of advantages in putting circular economy into effect. This paper analyses the related chances and discusses requirements of digital platforms for the realization of a circular economy. It specifically points to potential solutions offered by digital platforms for existing barriers. From there it identifies issues that need specific attendance to create economically and ecologically functional platforms. Three economically relevant perspectives are discussed for this: a management perspective, a legislative perspective and a social/systems perspective.
A policy mix for resource efficiency in the EU : key instruments, challenges and research needs
(2019)
Against the background of an often wasteful use of natural resources, the European Union has made resource efficiency a top policy priority. Policy formulation is, however, at a very early stage in many Member States, with often vague notions of what resource efficiency means, characterised by fragmented instruments and overlapping competencies. This paper develops a conceptual framework for defining, assessing and developing resource efficiency policy mixes. It argues that a mix of policies and instruments is best suited to overcoming the complex challenges of the 21st Century. Such a mix addresses multiple resource domains at a strategic, high level and contains interacting instruments targeting multiple actors, levels of governance and sectors and life-cycle stages of resource use. This paper looks at criteria for effective resource efficiency policy instruments, presents both an indicative policy mix across 9 policy domains and case studies (on environmental harmful subsidies, supply chain efficiency in food systems and product-service systems) and identifies key challenges to overcome trade-offs in instrument design, maximise synergies, reduce conflicts, promote coherence, coordinate activities and move from theory to practice. Research needs are discussed regarding who shall devise, implement, and coordinate such a policy mix, considering negotiating power, timing and complexity.
With the introduction of the Roadmap to a Resource Efficient Europe (2011) and the more recent commitment of The Action Plan towards the Circular Economy (2015), the European Commission (EC) has expressed its fundamental interest to substantially improve the resource efficiency of the European economy and enable the transition towards the Circular Economy (CE). This policy push has meanwhile been complemented by some quite ambitious national programmes for RE and CE and institutional advances but it is not yet bound to targets or mandatory reporting.
Against this background, the objective of this paper is to give a comprehensive overview of the current policy frameworks at EU and a selection of MSs and provide insights into the elements shaping policy processes. The analytical framework relies on three essential interconnected components: the policy framework, the economic incentive system and economic side policies which are relevant in the context of RE and CE and actor constellations. The paper does this looking at the interface between EU-MSs. The analysis is based on different empirical surveys in which the policy development is observed and discussed (EEA 2011, 2016a, 2016b, EIO 2013, 2014, 2016) and a comprehensive review of legislative and policy frameworks at the EU and selected MSs, undertaken as part of the project POLFREE (Policy option for a Resource-Efficient Economy) (Domenech et al., 2014, Bahn-Walkowiak et al., 2014). The analysis reveals that policy frameworks for RE/CE are complex and fragmented as competing goals and visions reduce effectiveness of measures. The paper makes recommendations as to how EU and MS policies could improve RE in a coordinated way, but recognizes that achieving such coordination will be challenging in the current political context.
Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
Because prevention is closely linked to complex consumption patterns, even cultural changes, such as increasing environmental awareness, changes in the average size of households or changes in the industrial structure of an economy, are relevant factors for the interpretation of changes in the generation of waste - it is more or less impossible to isolate the effect of specific waste prevention measures in this complex system. This must be considered, in particular, in international comparisons of policies and their potential transferability. The guidelines of the European Commission on waste prevention also point to the particular problem of data availability in the area of prevention: as waste statistics focus mainly on the treatment and fate of wastes, they are often of limited value for prevention of waste because they don't give sufficient information about their origins or reasons for their generation.
Against this background, this report has the following objectives:
Chapter 2 discusses strengths and weaknesses of typical waste-based prevention indicators; Chapter 3 analyses possible indicators that consider an upstream perspective and take into account the ecological rucksacks of products and components that have become waste; Chapter 4 focuses on specific product groups that could be targeted by waste prevention indicators.
In general, the report describes the complexity of measuring waste prevention and outlines pros and cons of possible approaches. The final chapter aims to draw rather pragmatic conclusions on possibly most preferable options for future policy-making.
Digitalisation is in full swing and it is changing and influencing the world of the 21st century as no other dynamics of change has done before. Dealing with its impacts and at the same time shaping digitalisation itself is therefore a core task for achieving a globally sustainable transformation (German Advisory Council on Global Change - WGBU, 2019). But which direction should digitalisation take to ensure that it makes e ective contributions to globally sustainable development? And what is the specific approach needed to steer digitalisation in the right direction?
Each year, approximately one-third of the food produced for human consumption is lost or wasted worldwide. The waste of resources used for this food has significant environmental impacts in terms of land and water use as well as greenhouse gas emissions. Consequently, one of the targets of the UN sustainable development goals is to halve per capita global food waste at the retail and consumer levels and reduce food losses along production and supply chains by 2030. However, sufficient knowledge about the suitability of instruments for food waste prevention is still lacking. The purpose of this paper is therefore threefold: first, it outlines the generation and causes of food losses and waste. Second, it discusses good practices from different countries, such as laws to reduce food waste, voluntary agreements, awareness campaigns and results from behavioural economics. Finally, based on these findings, this paper identifies barriers to as well as requirements for the implementation of effective and efficient instruments.
The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
This report provides an overview of the main findings from the different research tasks in the CIRCTER project and delivers selected policy messages with European coverage. The report provides: (Sec. 2) a territorial definition of the circular economy; (Sec. 3) insights into the available statistics on material and waste patterns and flows and their interpretation, alongside new territorial evidence on both aspects; (Sec. 4) a sectoral characterisation of the circular economy at regional level (NUTS-2), including data on turnover and jobs; (Sec. 5) key findings from the CIRCTER case studies; (Sec. 6) a systemic interpretation of the circular economy that works as a knowledge-integration mechanism for the entire report; (Sec. 7 and 8) an analysis of the most relevant circular economy policies and strategies at various territorial levels; (Sec. 8) a subset of policy recommendations focusing in particular on territorial and cohesion policies, and; (Sec. 9) suggestions for further research.
In this paper three approaches on transitions pathways are combined to study the role of agricultural nature conservation in the Dutch land use domain for achieving internationally agreed climate and biodiversity targets. The three perspectives used are the Multilevel Perspective (MLP), Initiative Based Learning (IBL) and Integrated Assessment Modelling (IAM). The analysis provides insights in how the combination of different research approaches can lead to more comprehensive policy advice on how agricultural nature conservation could help to achieve internationally agreed sustainability goals related to climate change and biodiversity. IAM shows under which conditions agricultural nature conservation could be consistent with European and global long-term goals regarding food security, biodiversity and climate. MLP provides insight into the extent in which agricultural nature conservation has affected or changed the existing nature and agricultural regimes. IBL, finally, reveals the challenges of encouraging agricultural nature conservation with policy measures. Our analysis shows that a combined perspective provides a deeper understanding of the underlying processes, reasons and motives of agricultural nature conservation, leading to more comprehensive policy recommendations.
CICERONE aims to bring national, regional and local governments together to jointly tackle the circular economy transition needed to reach net-zero carbon emissions and meet the targets set in the Paris Agreement and EU Green Deal. This document represents one of the key outcomes of the project: a Strategic Research & Innovation Agenda (SRIA) for Europe, to support owners and funders of circular economy programmes in aligning priorities and approaching the circular economy transition in a systemic way.
The study sheds light on the background of the prevention of plastic waste from packaging and disposable products by explaining the need for action, the environmental impacts and risks to human health. Experiences of the members of the PREVENT Waste Alliance and their partners in the prevention of plastic waste by multi-actor partnerships are presented by means of 17 best practice examples. Finally, the study gives recommendations for the reduction of plastic waste and the further work of the PREVENT Waste Alliance. These include success factors for waste prevention, necessary next steps and conclusions regarding the necessary political framework conditions.
We conducted a random allocation experiment at fashion week in Berlin in 2017, testing how face-to-face (f2f) communication affects sales of a fashion start-up focusing on second-hand. The experiment revealed that 11% of guests of an f2f event afterwards turned paying customers with an average basket size 11.8% higher than the overall sales event average. We add insights to research on entrepreneurial practice as well as on offline operations in the context of circular consumption in fashion, exposing the leveraging effect of f2f communication for customer acquisition and revenue of start-ups in the field of sustainable fashion.
Businesses like Airbnb have shown that a successful circular economy (CE) business can operate exclusively online. Although online communication and web appearance attributes have been subject to academic research given accelerated digitization, there is still a lack of knowledge about online attributes and their role in facilitating CE. We close the portrayed knowledge gap by conducting a discrete-choice experiment with best to worst scaling and focusing on the effect of CE experience on the perception of a CE website by ranking nine online attributes, grouped in three subsets. We therefore contribute by identifying online attributes that are perceived as favorable for CE businesses and detect how participation in CE activities affects the perception of these attributes. We find that third-party associated online attributes (e.g., user reviews or third-party guarantees) rank significantly higher throughout CE consumption patterns of the sample, being always amongst the top three attributes. This novel finding on online preferences opens a new direction for further research, as well as allows practitioners to optimize online operations accordingly. Furthermore, we find that users without prior touchpoints with CE have a higher need for information about the business model as compared to CE active users who are more interested in community related attributes.
Effectiveness and efficiency of food-waste prevention policies, circular economy, and food industry
(2020)
Digitalisation is taking place at a fast pace in all European countries and it is transforming the economies, societies, communication, jobs and the necessary skills for the workplace and everyday life. The Covid-19 pandemic is also accelerating digitalisation at many levels.
To address the great challenges resulting from this, the European Commission has launched the Green Deal, a long-term transformation strategy towards an innovative and sustainable society. Three important initiatives under the Green Deal are the New Circular Economy Action Plan, the Biodiversity Strategy for 2030 and the Zero Pollution Action Plan. The various strategies and action plans draw up a large portfolio of measures, instruments and milestones that are always linked to digital technologies. Ideally, these are eco-innovative and sustainable and contribute to improving living conditions in Europe.
The EIO Biennial Report 2020, which looks at a different topic every two years, considers digitalisation a major opportunity to accelerate the transition to a circular Europe. In the current report, the authors provide an overview of eco-innovation trends, illustrated by digital technology and policy practices that can further drive the circular economy.
The waste prevention program (WPP) from 2013 must be evaluated every 6 years and updated if necessary. The review and evaluation of the implementation of the WPP took place within the scope of the project. Based on the analysis results for the implementation of the WPP at federal, state and municipal level and an assessment of existing prevention potentials, concrete proposals for a possible further development and updating of the program on prioritized waste streams and corresponding priority prevention approaches were developed. In addition, structural adjustment and change needs of the WPP were worked out and further research was shown.
Germany's eco-innovation performance has declined compared to previous reports and scores 123 against 100 of the EU average. It is still quite high with respect to the input side of eco-innovation and relatively good, i.e. above EU average concerning socio-economic and eco- innovative outputs. However, the revised eco-innovation index shows weaknesses in eco-innovation activities and environmental outcomes. All in all, Germany ranks 6 this year.
This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.
By use of macro-economic model EXIOMOD, the expected impacts of actions described in the Strategic Research and Innovation Agenda (SRIA) have been analyzed. The results of this analysis show that the R&I actions described in the SRIA contribute to decoupling economic growth from resource use. The actions are expected to cause an increasing gross domestic product and a decreasing raw material demand. This results in an increasing extracted resource productivity, a measure used to show the decoupling of economic growth and resource use. It can however be questioned whether the actions in the SRIA - or the measures implemented in the model - assume a strong enough pace for decoupling economic growth and material use. The actions contribute to the climate goals of the European Commission, by showing a pathway through which the emissions of greenhouse gas can be reduced.
The need for a transition towards a circular economy (CE) is evident, as the current economic model is based on the exploitation of far more resources than the planet can replenish sustainably. A significant part of this economic transition is the inception of new, CE-oriented startups and business activities. While business model frameworks (BMF), such as the Business Model Canvas (BMC), were at the center of discussions about structuring business ideas in the beginning of the millennium, the conversation must now shift towards circular BMFs (CBMF). This paper follows the Design Research Methodology (DRM) for an empirical approach to devising a novel CBMF, including expert interviews as well as a first application of the framework with a startup. Throughout this process, a new and innovative tool called Circular Business Framework (CBF) was created and tested based on CE principles.
With increasing world population and an unsettling resource scarcity in the back, sustainble consumption has moved to the foreground of political, economical and social discussions. One major school-of-thought is Circular Economy (CE), an approach summarizing various sustainable consumption activites under one roof. However, quantitative studies on the consumer are rare, yet crucial for a transfer from linear to circular consumption. This dissertation adds to literature by providing pioneer insights into consumer behavior in CE as an overarching concept, instead limiting research on singular subconcepts. Namely, four consumer activities are studied: recycling, upcycling, renting and sharing. In order to identify relevant insights for both academics and practitioners in CE, the research question ("what drives participation in CE?") is broken down into sub-hypotheses, which are addressed by three empirical studies. Using the SOR-Model (adaption Belk 1975) as overarching logic, the three studies deal with (1) the consumer (and their motivation) and situational stimuli (both (2) offline and (3) online). Respectively, three data sets are consulted to assess the sub-hypotheses and to identify overarching insights on how to accelerate consumer participation in CE, The research methodology employed ranges from a structured equation model (SEM), a random allocation field experiment during Fashion Week in Berlin to a discrete-choice model with best-worst scaling. The dissertation succeeds in revealing that (1) different activities in CE can be summarized in one latent variable, proving CE as a wholesome concept in consumer-related activities; that (2) Trust has a leveraging effect on participation in CE activities. Further, Trust can be enhanced offline via face-to-face interaction and online via third-party online attributes.; and that (3) experience in CE activities affects perception of online attributes, implying the need for adapted measures when dealing with CE-unexperienced consumers as compared to consumers with prior experience in CE activities.
Artificial intelligence in the sorting of municipal waste as an enabler of the circular economy
(2021)
The recently finalized research project "ZRR for municipal waste" aimed at testing and evaluating the automation of municipal waste sorting plants by supplementing or replacing manual sorting, with sorting by a robot with artificial intelligence (ZRR). The objectives were to increase the current recycling rates and the purity of the recovered materials; to collect additional materials from the current rejected flows; and to improve the working conditions of the workers, who could then concentrate on, among other things, the maintenance of the robots. Based on the empirical results of the project, this paper presents the main results of the training and operation of the robotic sorting system based on artificial intelligence, which, to our knowledge, is the first attempt at an application for the separation of bulky municipal solid waste (MSW) and an installation in a full-scale waste treatment plant. The key questions for the research project included (a) the design of test protocols to assess the quality of the sorting process and (b) the evaluation of the performance quality in the first six months of the training of the underlying artificial intelligence and its database.
Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.
Nowadays, high expectations are set for a digitally enabled circular economy (CE), to enhance resource efficiency. Tracing, tracking, and storing information is most important for this. In this paper, the application of Internet of Things (IoT) and Distributed Ledger Technology (Blockchain) are hence discussed by presenting the case of professional Electrical and Electronic Equipment (EEE) in Italy. Within the context of CE, prevention of electronic waste (WEEE) is extremely relevant as it is a fast-growing waste stream, and the products contain environmentally damaging substances as well as valuable and rare materials. The use of a proper combination of IoT and blockchain can help the producers to keep control on products until EEE end-of-life, while promoting CE strategies and supporting decision-making. Based on the outcomes of five interviews conducted in 2019 to companies of the EEE sector, potential improvements in the EEE end-of-use management are discussed. After providing the definition of requirements for both the technical solution and its testing are provided, three solution variations and the related business models are created and presented, as well as considerations on their environmental and economic impacts. The study shows how digital technologies can support the appropriate and circular management of EEE products and WEEE.
The transition from today's "take, make, waste" economic paradigm to a circular economy requires a joint effort from actors on all levels: governments, business, and civil society. While companies are among the drivers of the circular transformation, they find it hard to achieve a circular economy on their own. Hence, cross-industry collaboration is one of the imperatives for scaling a circular economy. Against this background, econsense, together with Accenture and the Wuppertal Institute, launched its study "Germany's Transition to a Circular Economy - How to Unlock the Potential of Cross-Industry Collaboration".
Based on a survey and expert interviews within the econsense community, the study finds that companies are yet to unlock the full potential of cross-industry collaboration. While two thirds of analysed industry collaborations have a high potential for scaling the circular economy, only 43 per cent of those already show a high degree of interaction. The study provides concrete guidance for companies to get started with circularity and identify the right partners for cross-industry collaboration. Specifically, the report recommends companies: 1) Understand what circularity is about and map it on their own operations and processes. 2) Understand the different circular business models and identify the ones relevant to each business. 3) Discover areas where collaboration can help to create the needed foundation and to execute circular actions.
Reuse is still seen as a "niche phenomenon" and consumers seem to waste economic opportunities linked to buying and selling second-hand products. For this reason, this paper focuses on incentives and barriers to sell and buy second-hand products, as indicated in the literature, and applies a theoretical framework of transaction costs to explain the existing consumption patterns. For this paper, a representative online survey was conducted in which 1023 consumers in Germany participated, age 16 and older. The data were analyzed for statistically significant deviations between different groups of economic actors selling or buying second-hand products. Results show that valuable unused products exist in households, but barriers such as uncertainties about the reliability of the buyer or the quality of the product hinder the transition into sustainable consumption. Different forms of transaction costs are important explanatory variables to explain why consumers nevertheless predominantly buy new products, although they are aware that second-hand would save money and make an individual contribution to climate protection.
The ultimate goal of German Resource Efficiency Programme (ProgRess) is to make the extraction and use of natural resources more sustainable and reduce associated environmental pollution as much as possible. By doing this - also with responsibility towards future generations - the programme should create a prerequisite for securing a long-term high quality of life. To bring the policy approaches formulated in ProgRess to reality, efforts to implement resource efficiency measures have to be increased at all levels - from international to regional to local.
The chapter intends to provide an impetus for the current debate on ProgRess policy development. The chapter identifies, analyses and describes deficits and possibilities of vertical integration of the German programme in particular and derives recommendations for action which may also serve as indications for other strategies. The following sections are based on results of the advisory report "Vertical integration of the national resource efficiency programme ProgRess (VertRess)", conducted by the German Institute of Urban Affairs (Difu) and the Wuppertal Institute for Climate, Environment and Energy on behalf of the German Environmental Agency (UBA) and the Federal Ministry of the Environment, Nature Conservation and Nuclear Safety (BMU).
The article introduces and exemplifies the approach of evidence-based narratives (EBN). The methodology is a product of co-design between policy-making and science, generating robust intelligence for evidence-based policy-making in the Directorate General for Research and Innovation of the European Commission (DG RTD) under the condition of high uncertainty and fragmented evidence. The EBN transdisciplinary approach tackles practical problems of future-oriented policy-making, in this case in the area of programming for research and innovation addressing the Grand Societal Challenge related to climate change and natural resources. Between 2013 and 2018, the EU-funded RECREATE project developed 20 EBNs in a co-development process between scientists and policy-makers. All EBNs are supported with evidence about the underlying innovation system applying the technological innovation systems (TIS) framework. Each TIS analysis features the innovation, its current state of market diffusion and a description of the innovation investment case. Indicators include potential future market sizes, effects on employment and environmental and social benefits. Based on the innovation and TIS function analyses, the EBNs offer policy recommendations. The article ends with a critical discussion of the EBN approach.
Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.
The transport sector accounts for 20 per cent of the greenhouse gas emissions in Germany and it is therefore key to success for German climate policy. At present, however, there is no other sector with a wider gap in missing the trajectory to climate neutrality. The present study, conducted on behalf of Huawei within the project "Shaping the Digital Transformation - Digital Solution Systems for the Sustainability Transition", points out new pathways towards a sustainable and climate friendly transition of the transport sector. The report specifies concrete options to follow up on the ambitious goals of the new coalition agreement to foster clean and digital mobility solutions.
The authors refined eight theses on how digitalisation can foster sustainable mobility solutions and how to shape a supporting policy framework, which is aligning the financial and regulatory guardrails for ramping up a sustainable mobility system while gradually phasing down the usage of private cars.
More and more companies are announcing their intention to become climate-neutral and numerous companies already offer climate-neutral products or services: From climate-neutral parcel delivery to air travel. But what exactly do the companies' net-zero targets mean? Is the target set ambitious? And what role does offsetting play, i.e., purchasing carbon credits that are accounted against the company's own climate target? The approaches behind the proclaimed targets are often difficult to understand. Against this background, this Zukunftsimpuls provides ten recommendations for the definition and implementation of neutrality targets. Among other things, the authors advocate the use of a robust database as the basis for net-zero targets, emphasize the importance of transparent communication, and highlight the role that offsetting should play. Purchased carbon credits should make as limited a contribution as possible for meeting climate targets and should only be used to offset emissions that cannot be reduced or avoided. More generally, net-zero targets should not be made the sole criterion for ambitious climate strategies. Rather, they are a building block of a much more comprehensive strategy of corporate climate action.
The first step of complete transformation will be utilizing digital technologies and applications to improve current procedures, processes, and structures (Improve). Next, complete digitalisation will pave the way for new business models and framework conditions (Convert). Finally, comprehensive transformation of the economy and value creation will ensure the effective reorientation of society and lifestyles towards sustainability (Transform). This last step is critical for a successful ecological transformation, or a "green transformation", must be placed front and centre during international debate.
Through this report, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we will discuss three exemplary areas of ecological transformation where action is necessary: 1) A digital and circular economy that uses data to increase resource efficiency. 2) Intelligent, sustainable mobility that connects us in eco-friendly ways. 3) Transparent transitions towards sustainable food chains and agriculture.
This report represents the first phase of the Shaping Digital Transformation project. In this report, we will outline the framework of our project to create a starting point for further debates.
The rising popularity and strong increase in the number of electric bicycles make it necessary to consider the built-in resources as well as possible treatments after the use phase. The time lag between the purchase and the occurrence of relevant defects suggests significant increases in defective components. Especially the great dynamics of the market due to regular innovations, product renewals, and the lack of spare parts availability for older models make the long-term use by customers much more difficult than for conventional bicycles. Therefore, it is necessary to analyze circular business models for the electric bicycle market. In this way, the required structures for a sustainable electric bicycle industry can be created so that valuable materials do not go into disposal but undergo a new use phase. Based on the results of "AddRE-Mo-Value Preservation Scenarios for Urban Electromobility of Persons and Loads through Additive Manufacturing and Remanufacturing," a research project funded by the German Federal Ministry of Education and Research, this paper addresses four circular business models, two sales models, and two service models. The guiding research interest of this paper is the combination of remanufacturing and additive manufacturing from a business model perspective, analyzing the extent to which additive remanufacturing can be considered a solution for electric bicycles' circularity. After describing the approach and methods used to develop these four circular business models the business models are described and analyzed using the Business Model Canvas. Based on this analysis, it is shown that the combination of remanufacturing and additive manufacturing can be applied to the electric bicycle market and be integrated into both sales and service models. The description of these business models will help managers design viable business models in the context of sustainable electric bicycles. It also shows that the individual partners within the value chain must collaborate more closely. In the electric bicycle industry, a single company will probably not be able to close the product cycle completely. Further research is needed to develop concepts of the business models and examine their practical feasibility in technical and organizational operations to achieve a circular economy.
A main goal of this study - which also functions as deliverable 210078-D07 of the Circular Economy Beacons (CEB) project - is to evaluate currently available frameworks that measure and operationalise Circular Economy (CE), with a particular focus on the urban context. The regional focus lies on the Western Balkan region, which is at the centre of the project. Such "Urban Circularity Hotspot Frameworks" (UCHF) aim at providing decision support for policy makers, companies, citizens etc. regarding the transition to CE within cities. Based on the analysis of different frameworks, suggestions are derived regarding UCHF suitable for the specific characteristics of Western Balkan municipalities, i.e. a Circular Economy Beacons Urban Circularity Hotspot Framework (CEB-UCHF) ready for short-term implementation.
The transition to a greener and more circular economy has been a European policy priority for several years. The Circular Economy Action Plan of 2020 underlines the ambition. The following EEA initiatives are meant to support the transition process:
- Bellagio Process on circular economy monitoring principles (EPA network);
- Enhancement of EEA indicators on circular economy (ETC/WMGE);
- Explorative work on novel data streams (FWC);
- Co-creation work - knowledge sharing of monitoring experience (ETC/Eionet).
The scope of the present task was to report on the co-creation process that was undertaken at the end of 2020. The co-creation process was organised to identify:
(i) best practices on monitoring strategies, data sources and target setting; and
(ii) areas of circularity measuring and monitoring that remain challenging and require additional investment.
The co-creation process partially built on the work done during the Bellagio Process/Initiative which was run in parallel. This ETC report presents and documents the evidence gathered throughout the co- creation process as well as providing a retrospective analysis of the links to the Bellagio Principles.
How do recent changes in consumption in the wake of the COVID-19 pandemic affect the avoidance of packaging waste? How can an increase in packaging waste be countered and the previous trend towards unpackaged and reusable solutions be revived and promoted?
To tackle these questions, we use a systemic approach that regards packaging as a network of interrelated interests of industry (manufacturing and logistics), trade (retail and catering), consumers and the waste management sector. To analyse this network, we applied three methods. First, we analysed secondary sources such as surveys. Second, we conducted semi-structured interviews with seven actors from industry, consumer education and waste management in May and June 2020. Third, we used the questions from the interview guideline to do an online survey among representatives of the public waste management industry.
At the end of March 2022, the European Commission published its new EU Strategy for Sustainable and Circular Textiles. Its ambitious vision is to reduce textile waste, promote circular measures and minimise the negative environmental impacts of the textile industry. But what would a textile industry that keeps textiles in a closed loop look like, and what political conditions would be required in Germany? This Zukunftsimpuls paper by the Wuppertal Institute points to the role that Germany could play in the transformation towards a circular textile industry.
A large number and variety of activities are being undertaken to introduce Digital Product Passports (DPPs). However, only a few DPPs have made it into practice so far, so there is some uncertainty about which impact DPPs will actually have. With this paper, we aim to provide a structured overview of the current development of DPPs. We provide insights of 76 current corporate, policy, and research activities that exist and their objectives. To allow for a structured assessment and discussion of the diverse approaches we defined 13 criteria for a comparable description, categorization and evaluation. We expect that this overview will not only encourage feedback and contributions from the DPP community, as well as valuable discussions with and among experts. It is also intended to help promote and facilitate the adoption of DPPs for the Circular Economy by facilitating collaborations and suggestions for ongoing activities.
Digital product passport : the ticket to achieving a climate neutral and circular European economy?
(2022)
The introduction of a Digital Product Passport (DPP) is an opportunity to create a system that can store and share all relevant information throughout a product's life cycle. This would provide industry stakeholders, businesses, public authorities and consumers with a better understanding of the materials used in the product as well as their embodied environmental impact.
With the COVID-19 pandemic, the Russian invasion of Ukraine and the cost-of-living crisis, now is a critical moment to transform our economic and business models, while also addressing the huge scale of material emissions. DPPs can be a pivotal policy instrument in this goal. Furthermore, DPPs can accelerate the twin green and digital transitions as part of EU efforts to deliver positive climate action and sustainable economies.
In 2020, the European Commission (EC) adopted a new Circular Economy Action Plan (CEAP), which emphasised the need for circular economy initiatives to consider the entire life cycle of products, from the production of basic materials to end-of-life disposal. The Circular Economy Package published in March 2022 includes a proposal for an Ecodesign for Sustainable Products Regulation (ESPR), which builds upon the Ecodesign Directive that covers energy-related products.
A DPP will form a key regulatory element of the ESPR by enhancing the traceability of products and their components. This will provide consumers and manufacturers with the information needed to make better informed choices by taking their environmental impact into consideration.
As discussed in the report, there is widespread agreement amongst business leaders that a well-designed DPP could have both short- and longer-term benefits, improving access to reliable and comparable product sustainability information for businesses, consumers and policymakers.
A well-designed DPP can unify information, making it more readily accessible to all actors in the supply chain. This will support businesses to ensure an effective transformation towards a decarbonised industry. It could also create incentives for companies to make their products more sustainable, as improving access to reliable and consistent information across supply chains will make it easier for customers to make comparisons.
Accelerating circular economy solutions to achieve the 2030 agenda for sustainable development goals
(2022)
Circular economy seems a vital enabler for sustainable use of natural resources which is also important for achieving the 2030 agenda for sustainable development goals. Therefore, a special session addressing issues of "sustainable solutions and remarkable practices in circular economy focusing materials downstream" was held at the 16th International Conference on Waste Management and Technology, where researchers and attendees worldwide were convened to share their experiences and visions. Presentations focusing on many key points such as new strategies, innovative technologies, management methods, and practical cases were discussed during the session. Accordingly, this article compiled all these distinctive presentations and gave insights into the pathway of circular economy towards the sustainable development goals. We summarized that the transition to circular economy can keep the value of resources and products at a high level and minimize waste production; the focus of governmental policies and plans with the involvement of public-private-partnership on 3Rs (reduce, reuse, and recycle) helps to improve the use of natural resources and take a step ahead to approach or achieve the sustainability.
In the coming years, we must set a course that will allow as to protect our climate, reduce resource consumption, and preserve biodiversity. A profound ecological system change is on the horizon in all central areas of action of the economy and society, or transformation arenas.
Digitalisation is a prerequisite for the success in this change and will impact these arenas at multiple levels: Digital technologies and applications will make it possible to improve current procedures, processes, and structures (Improve) and help us take the first steps towards new business models and frameworks (Convert). Despite this, digitalisation itself must be effective enough to facilitate a complete ecological restructuring of our society and lives to achieve more far-reaching economic transformation and value creation (Transform).
The ability to obtain, link, and use data is a basic prerequisite for tapping into the potential of digitisation for sustainability transformation. However, data is not a homogeneous raw material. Data only gains value when we know the context in which it was collected and when we can use it for a specific purpose.
The discussion on what structures and prerequisites are necessary for the system-changing use of data has only just begun. This study was conducted to serve as a starting point for this discussion as it describes the opportunities and prerequisites for a data-based sustainability transformation. This study focuses on environmental data, data from plants, machines, infrastructure, and IoT products. Our task will be to increase the use this data for systemic solutions (system innovation) within transformation arenas where different stakeholders are working together to initiate infrastructure, value chain, and business model transformation.
This paper analyses the potential of digital information technology to enable the reliable provision of product information along the plastics supply chain. The authors investigate the possible contribution of a product passport equipped with decentralised identifiers and verifiable credentials to overcome information deficits and information asymmetry in the circular plastics economy. Through this, high-quality plastics recycling could be enabled on a larger scale than currently possible.
Variations in quantity, quality and time availability of input materials pose a major risk to circular supply chains (CSC) and require new models for creating and evaluating adaptive and resilient CSC in the circular economy (CE). This can be achieved through consistent modelling of the overarching relationship between resource input- and output streams, without neglecting the associated risks.
The model proposed below consists of five components based on five resilience requirements for supply-chains (SCs). It provides a data-based recommended course of action for managers with a low entry-barrier. It consists of a CSC visualization, safety stock calculation, risk monitoring for each SC node, reporting logic, and a measurement catalogue. The inspiration for this model came from an innovative case study ("Zirkelmesser") in the metal processing industry, where secondary products and materials are used to produce new products. Here, the problem of maintaining the resource supply arose and led to resilience issues. The mentioned case study serves as an application example for the model application and contributes to making emerging circular supply chains predictable and more controllable, thus increasing their resilience.
The construction sector is the second largest area for the application for plastics. Due to the long life times of construction products, the implementation of the circular economy faces its own challenges. To investigate this challenge, the study covers a market study for Germany, voluntary take-back and recycling schemes of construction products, as well as the use of plastic recyclates in construction products. In addition, plastic packaging of construction products is covered. Opportunities and barriers to the use of recycled plastics in construction products are derived from the intersection of available technologies, recyclate supply, and technical requirements for construction products. The report concludes with recommendations to various stakeholders on how to promote the use of recyclates in construction products and their packaging. Important points here are the introduction of a recyclate quota for films as construction product packaging and the description of recycling possibilities and recyclate content in the technical documentation of construction products.
Within the Shaping Digitalisation project, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we are discussing three stand-out areas where action is most needed to achieve ecological transformation: mobility, the circular economy, and agriculture and food.
This report addresses the second area in need of action. Up until now, discussions on the circular economy have been limited to recycling and the re-use of materials. We must expand the scope of these discussions to include new, resource-efficient business models and the comprehensive transformation of value chains and industrial structures. Our analysis has found that digitalisation is indispensable for this transformation if used properly.
We hope this report will provide the impetus needed to kick-start a climate- and resource-friendly industrial transformation in Germany. Here, we have incorporated the findings of our interdisciplinary workshop on "Shaping the Digital-Ecological Industrial Transformation - Business Models and Political Framework Conditions for Climate and Resource Protection" that was attended by experts from international research institutes, civil organizations, public authorities, and private companies.
The project "Plastic Credits - Financing the Transition to the Global Circular Economy" supports the implementation of a waste management structure in India's rural regions. By that it aims to improve the current waste collection and treatment structures in the pilot regions Goa, Maharashtra, and Kerala. Herein, the project focuses on low value plastics (LVP), and especially multi-layer plastics (MLP), that have no market value. In order to analyze the environmental impacts of the project, an Environmental Impact Assessment (EIA) was conducted. The considered environmental components comprise: greenhouse gas emissions, usage of primary resources, impacts on marine and terrestrial wildlife, standard of living, and economic costs.
The Digital Product Passport (DPP) is a concept for collecting and sharing product-related information along the life cycle of a product. DPPs are currently the subject of intense discussion, and various development efforts are being undertaken. These are supported by regulatory activities, especially in the case of the battery passport. The aggregation of product life-cycle data and their respective use, as well as the sharing of these data between companies, entrepreneurs, and other actors in the value chain, is crucial for the creation of a resource-efficient circular economy. Despite the urgent need for such a solution, there is currently little attention given to the digital infrastructure for the creation and handling of the DPPs (i.e., the so-called DPP system). Moreover, there is so far no common understanding of what the requirements for a DPP system are. This is the background and underlying motivation of our paper: we identify the requirements for a DPP system in a structured way, i.e., based on stakeholder involvement and current literature from science and industry. In addition, we compose, categorize, and critically analyze the results, i.e., the list of requirements for DPP systems, in order to identify gaps. Summarized, our research provides insights into the criteria to be considered in the creation of an actual DPP system.
The ecological challenges of this decade have been clearly identified. The pressure of problems is increasing drastically; progress in climate protection or the preservation of biodiversity is insufficient. Little time is left to act. In consequence, we can only achieve and permanently secure social and environmental prosperity through far-reaching changes in economy and society.
As a socio-technical innovation, digitalisation can realise its full ecological potential above all where it helps to profoundly change today's lifestyles, consumption patterns, and economic practices with a clear commitment to sustainability. As the most urgent design task of the 21st century, it is important to put digitalisation's enormous creative power at the service of the great transformation. The "great transformation" refers to the comprehensive restructuring of technology, the economy, and society in order to deal with the social and ecological challenges of the 21st century. This is a task for state action in terms of both regulatory policy orientation and facilitating collective processes of change - new tasks call for new governance.
A digital-ecological statecraft is the indispensable prerequisite for effective state action to shape the social-ecological digital transformation. Using the example of the platform economy, we explore challenges, starting points, and (policy) measures.