The implementation of energy efficiency improvement actions not only yields energy and greenhouse gas emission savings, but also leads to other multiple impacts such as air pollution reductions and subsequent health and eco-system effects, resource impacts, economic effects on labour markets, aggregate demand and energy prices or on energy security. While many of these impacts have been studied in previous research, this work quantifies them in one consistent framework based on a common underlying bottom-up funded energy efficiency scenario across the EU. These scenario data are used to quantify multiple impacts by energy efficiency improvement action and for all EU28 member states using existing approaches and partially further developing methodologies. Where possible, impacts are integrated into cost-benefit analyses. We find that with a conservative estimate, multiple impacts sum up to a size of at least 50% of energy cost savings, with substantial impacts coming from e.g., air pollution, energy poverty reduction and economic impacts.
The Energy End-use Efficiency and Energy Services Directive (ESD) of the European Union requires the member states to define and attain an overall target of at least 9 % annual energy savings between 2008 and 2016. Even if this target is indicative, this is the first international framework mandating countries to report on their energy savings results and prove achievement of their targets. The directive thus also required the development of harmonised calculation methods that can be used by member states for this proof and reporting. Existing literature covers most of the usual issues related to energy savings evaluation, but mostly looking at single, given energy efficiency programmes or policies. The evaluation objective for the ESD implementation is different, as it aims at accounting for the whole energy savings achieved in a country. Moreover, one of the main difficulties is the diversity in history and experience on this topic among the member states. In this context, the European project EMEEES has worked out an integrated system of bottom-up and top-down methods for the measurement of energy savings. The paper presents the overview of its final results. The proposals, inter alia, include 20 bottom-up and 14 top-down case applications of general evaluation methods. They enable more than 90 % of the potential energy savings to be measured and reported. They were used as a starting point by the European Commission to develop the methods recently recommended to the member states. Furthermore, the paper briefly discusses the importance of the quantity to be measured-all or additional energy savings - and the effect of measures implemented before the entering into force of the ESD ("early action"), and what this meant for the methods to be developed. It compares the main elements of calculation needed to ensure consistent results between bottom-up and top-down methods at the overall national level. Finally, general conclusions are drawn about what could be the next steps in developing an evaluation system that enables a high degree of comparability of results between different countries.
Mit Steigerungen der Energie- und Ressourceneffizienz sind gelegentlich sog. Rebound-Effekte verbunden. Die durch die Effizienzsteigerung eingesparten Kosten führen dann durch verstärkte Nutzung oder zusätzlichen Konsum und damit verbundener Produktion zu weiterem Energie- und Ressourcenverbrauch. Obwohl oft und gerne vergessen wird, dass Rebound-Effekte durchaus auch Indikatoren positiver Entwicklungen sind, reduzieren sie unstrittig erzielte Effizienzgewinne. Aber welchen Umfang haben diese Effekte überhaupt? Und gibt es Möglichkeiten, ihren Einfluss zu schmälern?
Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents both the partly new methods and the results of a comprehensive analysis of a micro- and meso-level energy sufficiency policy package to make electricity use in the home more sufficient and reduce at least the growth in per-capita dwelling size. The objective is to find out how policy can support households and their members, as individuals or as caregivers, but also manufacturers and local authorities in practicing energy sufficiency. This analysis needed an adapted and partly new set of methods we developed. Energy sufficiency does not only face barriers like energy efficiency, but also potential restrictions for certain household members or characteristics, and sometimes, preconditions have to be met to make more energy-sufficient routines and practices possible. All of this was analysed in detail to derive recommendations for which policy instruments need to be combined to an effective policy package for energy sufficiency. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some energy sufficiency policy instruments may be the same as for energy efficiency, such as energy pricing policies. Some may simply adapt technology-specific energy efficiency policy instruments. Examples include progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require new policy approaches. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation.
India's present development trajectory is at a crucial juncture with a requirement to meet the demands of a population of over 1.2 billion while ensuring environmental sustainability. The resulting economic growth over the past two decades has over-exploited finite natural resources and led to tremendous environmental degradation. Therefore, decoupling economic growth from resource consumption is crucial in the transformation towards a green economy. Building construction is one of the most resource-intensive sectors, as well as creating a high impact on the environment. This study analyzes existing mechanisms in India's building construction sector that attempt to decouple economic growth from resource use and environmental impacts. The key contributors for decoupling are analyzed. Recommendations for regulations, market incentives, transparency, data monitoring and capacity-building are provided for an array of policy initiatives targeted at political and financial decision-makers at the national, state and local levels for different buildings.
Energiesuffizienz ist neben Energieeffizienz ein zweiter Weg, den Energieverbrauch zu reduzieren. Während Energieeffizienz bei unverändertem Nutzen den Energieinput senkt, ist Energiesuffizienz eine Strategie mit dem Ziel, die Menge an technisch bereitgestellter Energie durch Veränderungen der Quantität oder Qualität des Nutzens aus Energie auf ein nachhaltiges Maß zu begrenzen oder zu reduzieren. Das kann durch Reduktion, Substitution oder Anpassung des Nutzens an den Bedarf im Alltag geschehen. Viele Haushalte praktizieren schon Energiesuffizienz, aber die Hemmnisse für eine stärkere Nutzung sind groß. Auch die Energiesuffizienz im Haushalt benötigt daher eine Flankierung durch die Politik. Im BMBF-Projekt "Energiesuffizienz" wurde daher erstmals eine integrierte Energiesuffizienzpolitik untersucht, die insbesondere den Stromverbrauch in den privaten Haushalten adressiert.
Die Entscheidung für ein von volatilen Erzeugungsquellen dominiertes Stromsystem stellt an die Stabilisierung des Systems neue Anforderungen. Zugleich bieten sich neue Optionen. Die bisherige Asymmetrie, nach der für die Stabilisierung die Kraftwerksseite verantwortlich sei, ist überkommene Praxis, deswegen auch heute habituell naheliegend, aber vermutlich nicht länger effizient. Die im Titel genannten nachfrageseitigen Ausgleichsoptionen (SE & DSM) bieten sich an. Im Beitrag wird deren Potential abgeschätzt. In vier Gestaltungsfeldern wird zudem gefragt, ob die bislang von der Politik gegebenen rechtlichen Mandate konsequent SE & DSM als Option berücksichtigen. Das Ergebnis ist viermal (weitgehende) Fehlanzeige.
The economic assessment of low-carbon energy options is the primary step towards the design of policy portfolios to foster the green energy economy. However, today these assessments often fall short of including important determinants of the overall cost-benefit balance of such options by not including indirect costs and benefits, even though these can be game-changing. This is often due to the lack of adequate methodologies.
The purpose of this paper is to provide a comprehensive account of the key methodological challenges to the assessment of the multiple impacts of energy options, and an initial menu of potential solutions to address these challenges.
The paper first provides evidence for the importance of the multiple impacts of energy actions in the assessment of low-carbon options.
The paper identifies a few key challenges to the evaluation of the co-impacts of low-carbon options and demonstrates that these are more complex for co-impacts than for the direct ones. Such challenges include several layers of additionality, high context dependency, and accounting for distributional effects.
The paper continues by identifying the key challenges to the aggregation of multiple impacts including the risks of overcounting while taking into account the multitude of interactions among the various co-impacts. The paper proposes an analytical framework that can help address these and frame a systematic assessment of the multiple impacts.
Staatliche Regulierung ist verpönt. Häufig läuft es dann auf den Appell hinaus: Jeder einzelne Bürger habe es selbst in der Hand. Doch die Alltagsroutinen sind in der Regel mächtiger als das Umweltbewusstsein. Beim Marmor für das Badezimmer spielen Amortisationszeiten keine Rolle. Die solare Warmwasseranlage ist dagegen oftmals "zu teuer". Gesetzliche Standards hingegen verselbstständigen Energieeffizienz und den Ausbau erneuerbarer Energien. Sie machen "Öko zur Routine". Dieser Artikel beschreibt die Notwendigkeit für das Schaffen neuer Routinen und zeigt wie dies durch Standards, Limits und faire Umsetzungsbedingungen sowie attraktive Alternativangebote zum gegenwärtigen, häufig nicht nachhaltigen Verhalten auch möglich ist.
The paper presents the results of an ex-ante evaluation of the economy-wide benefits that may be achieved through the implementation of the 20-year Energy Efficiency Action Plan (EEAP) in Thailand. The objective of the EEAP is to reduce energy intensity by 25 % in 2030 compared to 2010. This is to be reached by reducing the projected energy consumption by 20 % or 38 Mtoe until 2030. We have specified an analytical framework, which allows for a calculation of the overall energy cost savings, energy import cost reductions and reduced CO2 emissions. Moreover, we calculated the induced energy efficiency investments, employment effects and impacts on governmental budget. The evaluation shows that an effective implementation of the plan may lead to a reduction in energy expenditure of 37.7 billion EUR by 2030. Moreover, the EEAP-induced energy savings will significantly reduce the greenhouse gas emissions as well as Thailand’s energy import costs and generate private investment in energy efficiency of about 5 billion EUR annually in 2030, which in turn may lead to about 300,000 new jobs. The size of the net impact of the plan on Thailand’s governmental budget is uncertain due to positive and negative effects on corporate and income tax revenues, expenses for unemployment benefits, governmental energy consumption, expenses for energy subsidies and energy tax income.
Energy Efficiency First (EEF) is an established principle for European Union (EU) energy policy design. It highlights the exploitation of demand-side resources and prioritizes cost-effective options from the demand-side over other options from a societal cost-benefit perspective. However, the involvement of multiple decision-makers makes it difficult to implement. Therefore, we propose a flexible decision-tree framework for applying the EEF principle based on a review of relevant areas and examples. In summary, this paper contributes to applying the EEF principle by defining and distinguishing different types of cases - (1) policy-making, and (2) system planning and investment - identifying the most common elements, and proposing a decision-tree framework that can be flexibly constructed based on the elements for different cases. Finally, we exemplify the application of this framework with two example cases: (1) planning for demand-response in the power sector, and (2) planning for a district heating system.
In Germany, the number of renewable energy prosumers has increased rapidly since 2000. However, the development of prosumers has faced and will continue to face various economic, social, and technological challenges, which have triggered the emergence of a number of innovative business models (BM). This paper enriches the empirical basis for prosumer-oriented BMs by investigating two BM innovations in Germany (P2P electricity trading and aggregation of small-size prosumers) drawing on business model and socio-technical transition theories. A mix of qualitative data collection methods, including document analysis and semi-structured expert interviews, was applied. We found that while both BMs can potentially address the challenges associated with renewable energy prosumer development in Germany, small-scale prosumers’ participation in both BMs has been limited so far. We identified various internal and external drivers and barriers for scaling up these BMs for prosumer development in Germany. Despite these barriers, both aggregation and centralized P2P targeting prosumers may potentially be also taken up by incumbent market actors such as utilities. Decentralized P2P on the other hand still faces significant internal and external barriers for upscaling. Based on the analysis, the paper provides policy recommendations with respect to the identified drivers and barriers. From a theoretical perspective, our findings provide further evidence to challenge the dichotomous understanding of niche actors and incumbents, the latter of which are often theorized to be resistant to radical innovations.
Die Dekarbonisierung der Mietwohnungsbestände ist zwingende Voraussetzung für die Einhaltung deutscher Klimaschutzziele. Hierzu ist eine schnelle und deutliche Verbesserung der Energieeffizienz unabdinglich. Aber: funktioniert der Markt für Energieeffizienz bei Mietwohnungen? Eine empirische Untersuchung auf dem Wuppertaler Mietwohnungsmarkt gibt Antworten darauf. Um die Sanierungsrate signifikant zu steigern, etwa durch eine höhere Zahlungsbereitschaft für Energieeffizienz, braucht es sowohl für Vermieter als auch für Mieter verbesserte Rahmenbedingungen.
Strengthening global climate governance and international cooperation for energy‐efficient buildings
(2023)
Buildings constitute one of the main GHG emitting sectors, and energy efficiency is a key lever to reduce emissions in the sector. Global climate policy has so far mostly focused on economy-wide emissions. However, emission reduction actions are ultimately sectoral, and opportunities and barriers to achieving emission reductions vary strongly among sectors. This article therefore seeks to analyse to what extent more targeted global governance may help to leverage mitigation enablers and overcome barriers to energy efficiency in buildings. To this end, the article first synthesises existing literature on mitigation enablers and barriers as well as existing literature on how global governance may help address these barriers ("governance potential"). On this basis, the article analyses to what extent this governance potential has already been activated by existing activities of international institutions. Finally, the article discusses how identified governance gaps could be closed. The analysis finds that despite the local characteristics of the sector, global governance has a number of levers at its disposal that could be used to promote emission reductions via energy efficiency. In practice, however, lacking attention to energy efficiency in buildings at national level is mirrored at the international level. Recently, though, a number of coalitions demanding stronger action have emerged. Such frontrunners could work through like-minded coalitions and at the same time try to improve conditions for cooperation in the climate regime and other existing institutions.
Studies show that people can tolerate elevated temperatures in the presence of appreciable air movement (e.g., from using ceiling fans). This minimises the use of air-conditioners and extends their set-point temperature (Tset), resulting in energy savings in space cooling. However, there is little empirical evidence on the energy savings from using ceiling fans with Room Air-Conditioners (RACs). To address this gap, we analysed the energy performance of RACs with both fixed-speed compressors and inverter technology at different set-point temperatures and ceiling fan speed settings in 15 residential Mixed-Mode Buildings (MMBs) in India. Thermal comfort conditions (as predicted by the Indian Model for Adaptive Comfort-Residential (IMAC-R)) with minimum energy consumption were maintained at a set-point temperature (𝑇set) of 28 and 30 C and a fan speed setting of one. Compared with a Tset of 24 °C, a 𝑇set of 28 and 30 °C resulted in energy savings of 44 and 67%, respectively. With the use of RACs, a configuration with a minimum fan speed was satisfactory for an optimal use of energy and for maintaining the conditions of thermal comfort. In addition, RACs with inverter technology used 34-68% less energy than fixed-speed compressors. With the rising use of RACs, particularly in tropical regions, the study's outcomes offer a significant potential for reducing space-cooling energy consumption and the resultant greenhouse gas (GHG) emissions.