Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
Document Type
- Peer-Reviewed Article (14)
- Report (6)
- Part of a Book (4)
- Conference Object (4)
Language
- English (28) (remove)
Water and energy are two pivotal areas for future sustainable development, with complex linkages existing between the two sectors. These linkages require special attention in the context of the energy transition. Against this background, this paper analyses the role of water availability in the development of solar thermal and photovoltaic power plants for the case of the Draa Valley in southern Morocco. Located in a semi-arid to arid mountainous area, the Drâa Valley faces high water stress - a situation expected to worsen due to climate change. At the same time, the region has one of the greatest potentials for solar energy in the world. To examine whether limited water availability could accelerate or delay the implementation of solar thermal and photovoltaic power plants, this paper compares regional water availability and demand in the Draa Valley for different scenarios, paying particular attention to potential socio-economic development pathways. The Water Evaluation and Planning System software is applied to allocate the water resources in the study region. The water supply is modelled under the Representative Concentration Pathway 8.5 climate scenario, while the water demand for the Drâa Valley is modelled for a combination of three socio-economic and two energy scenarios. The climate scenario describes a significant decrease in water availability by 2050, while the socio-economic and energy scenarios show an increase in water demand. The results demonstrate that during a sequence of dry years the reservoirs water availability is reduced and shortages in water supply can result in high levels of unmet demand. If this situation occurs, oasis farming, water for drinking and energy production could compete directly with each other for water resources. The energy scenarios indicate that the use of dry cooling technologies in concentrated solar power and photovoltaic hybrid systems could be one option for reducing competition for the scarce water resources in the region. However, given that energy generation accounts for only a small share of the regional water demand, the results also suggest that socio-economic demand reduction, especially in the agricultural sector, for example by reducing the cultivated area, will most likely become necessary.
In light of Egypt's transition to a green economy, this report focuses on reducing greenhouse gas (GHG) emissions and increasing resource efficiency along three different value chains in which small and medium-sized enterprises (SMEs) play a crucial role. In order to support SMEs in Egypt to take advantage of implementing greening options along value chains, more detailed analyses are needed. Therefore, the aim of this study is to analyse three selected supply chains to identify greening opportunities for SMEs. Against this background, the project report is structured as follows: Chapter 2 introduces the background with an overview over the concept of green economy followed by Egypt's economy and its green economy. This is followed by a presentation of the value chains and an overview of the respective sectors. Chapter 3 describes the research approach, methods and data collection. The following chapters examine the three selected value chains cotton, sugar beet and refrigerators, including environmental hot spots, greening options as well as the experts' evaluation of those greening options. The report concludes with key recommendations in Chapter 7.
Sustainable energy technologies are widely sought-after as essential elements in facing global challenges such as energy security, global warming and poverty reduction. However, in spite of their promising advantages, sustainable energy technologies make only a marginal contribution to meeting energy related needs in both industrialised and developing countries, in comparison to the widespread use of unsustainable technologies. One of the most significant constraints to their adoption and broad diffusion is the socio-economic context in which sustainable energy technologies are supposed to operate. The same holds true for community-based energy projects in developing countries supported by the WISIONS initiative. Practical strategies dealing with these socio-economic challenges are crucial elements for project design and, particularly, for the implementation of project activities. In this paper experiences from implementing community-based projects are reviewed in order to identify the practical elements that are relevant to overcome socio-economic challenges. In order to systematise the findings, an analytical framework is proposed, which combines analytical tools from the socio-technical transition framework and insights from participative approaches to development.
Accelerating the diffusion of domestic biogas is considered to be a promising option for reaching the goal of universal access to energy by 2030, particularly for the provision of cooking energy for rural populations in developing countries. The aim of this study is to develop a systematic account of the factors that influence the diffusion of domestic biogas technologies. To achieve this objective, a three step analysis approach is applied. In the first step, a conceptual model is built based on insights from scholars that have been studying the diffusion of energy innovations in rural contexts. In the next step, a qualitative content analysis of scientific literature is undertaken to test and refine the categories proposed by the conceptual model and to systematically organise the empirical evidence of the factors that influence the diffusion of domestic biogas in developing and emerging countries. The systemised evidence is used to identify the components and interactions between the household configurations and socio-economic context that determine both the adoption process at household level and the overall technology diffusion. Finally, in the last step, we reflect on the implications of the resultant systematic conceptualisation regarding the purpose and design of programmes promoting the dissemination of domestic biogas technologies.
The Paris Agreement calls on all nations to pursue efforts to contribute to limiting the global temperature increase to 1.5 °C above pre-industrial levels. However, due to limited global, regional and country-specific analysis of highly ambitious GHG mitigation pathways, there is currently a lack of knowledge about the transformational changes needed in the coming decades to reach this target. Through a meta-analysis of mitigation scenarios for Germany, this article aims to contribute to an improved understanding of the changes needed in the energy system of an industrialized country. Differentiation among six key long-term energy system decarbonization strategies is suggested, and an analysis is presented of how these strategies will be pursued until 2050 in selected technologically detailed energy scenarios for Germany. The findings show, that certain strategies, including the widespread use of electricity-derived synthetic fuels in end-use sectors as well as behavioral changes, are typically applied to a greater extent in mitigation scenarios aiming at high GHG emission reductions compared to more moderate mitigation scenarios. The analysis also highlights that the pace of historical changes observed in Germany between 2000 and 2015 is clearly insufficient to adequately contribute to not only the 1.5 °C target, but also the 2 °C long-term global target.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
This paper attempts to assess whether renewable energy self-sufficiency can be achieved in the crop production and processing sector in Tanzania and if this could be accomplished in an environmentally sustainable manner. In order to answer these questions the theoretical energy potential of process residues from commercially produced agricultural crops in Tanzania is evaluated. Furthermore, a set of sustainability indicators with focus on environmental criteria is applied to identify risks and opportunities of using these residues for energy generation. In particular, the positive and negative effects on the land-use-system (soil fertility, water use and quality, biodiversity, etc.) are evaluated. The results show that energy generation with certain agricultural process residues could not only improve and secure the energy supply but could also improve the sustainability of current land-use practices.
The study analyses the country background, emissions trends, ongoing activities and barriers relating to the implementation of the Nationally Determined Contribution (NDC) of Morocco under the UNFCCC. A special emphasis is laid on further mitigation potentials in the fields of urban environment, the mineral sector and the transport sector. A chapter is dedicated to the relevance and perspectives of coal use.
This study conducted by Wuppertal Institute and Germanwatch explores how the social pillar of sustainability at the local level could be met in Concentrated Solar Power (CSP) projects. For this purpose, the authors evaluate the livelihood dimension of CSP technology based on a case study conducted on the 160 MW pilot CSP plant Nooro I in Ouarzazate, Morocco.
In many developing countries large parts of the population are negatively affected by the lack of access to clean and affordable energy. Providing sustainable energy services to these people has been acknowledged as a key component to reduce poverty. One form of development assistance to address the needs of the energy-poor at the local level are small-scale renewable energy projects. Like all development interventions, these energy projects are not intended to produce short-term outputs, but to create long-term impacts. Thus, it has become increasingly important to evaluate and accurately assess their sustainability. But despite the widely recognized need to identify successes factors and explain failure only few studies exist that address the sustainability of small-scale of energy development efforts post implementation. Against this background the paper presents the results of a post-evaluation of 23 projects supported via the Sustainable Energy Project Support (SEPS) scheme of the WISIONS initiative run by the Wuppertal Institute. The analysis provides insights on the influence that socio-economic, environmental, geographic and gender factors can have on the sustainability of small-scale renewable energy projects in developing countries.
Access to sustainable and affordable energy services is a crucial factor in reducing poverty in developing countries. In particular, small-scale and community-based renewable energy projects are recognized as important forms of development assistance for reaching the energy poor. However, to date only a few empirical evaluations exist which analyze and compare the impact of these projects on local living conditions and their sustainability ex-post implementation.
To better understand the impacts and the conditions that influence sustainability of these projects, the research presented in this paper evaluated 23 local development projects post implementation. By applying an standardized evaluation design to a cross-sectional sample in terms of renewable energy sources (solar, wind, biomass, hydro), user needs (electricity, food preparation, lighting, productive uses), community management models, finance mechanisms and geographical locations, the review results provide valuable insights on the underlying conditions that influence the success or failure of these small-scale local energy interventions. The empirical evidence suggests that the sustainability of small-scale energy implementations (≤100 kW) in developing countries is determined by the same factors, independent of the socio-cultural, political and ecological context. These findings allow to better predict the long-term success of small sustainable energy projects in developing countries, this can help to improve project designs and increase the certainty for future investment decisions.
The role of gender concerns in the planning of small-scale energy projects in developing countries
(2014)
The role of gender concerns in the planning of small-scale energy projects in developing countries
(2015)
One of the main objectives of impact assessments is to identify potentially significant impacts. However, determining this significance has received very limited attention as a procedural step in social impact assessments. Consequently, only limited research and documentation exists on approaches, survey tools and evaluation methods, especially with regard to participatory approaches and combined participatory-technical approaches. This study aims to address this research gap by developing and applying a joined participatory and technical impact significance evaluation. The approach is applied in a case study which analysed the livelihood impacts of the large-scale concentrated solar power plant NOORO I in Ouarzazate, Morocco.
The analysis shows that although different approaches and significance criteria must be applied when involving both local stakeholders and experts, the linked analysis offers more robust results and an improved basis for decision-making. Furthermore, it was observed in the case study that impacts affecting the social, cultural and political spheres were more often considered significant than impacts affecting the physical and material livelihood dimensions. Regarding sustainability assessments of large-scale renewable energy plants, these findings underline the importance (as for other large-scale infrastructure developments) of placing greater emphasis on the inclusion of social aspects in impact assessments.