Refine
Has Fulltext
- yes (77) (remove)
Year of Publication
Document Type
- Peer-Reviewed Article (31)
- Report (27)
- Contribution to Periodical (6)
- Part of a Book (4)
- Working Paper (4)
- Conference Object (3)
- Book (2)
New energy technologies may fail to make the transition to the market once research funding has ended due to a lack of private engagement to conclude their development. Extending public funding to cover such experimental developments could be one way to improve this transition. However, identifying promising research and development (R&D) proposals for this purpose is a difficult task for the following reasons: Close-to-market implementations regularly require substantial resources while public budgets are limited; the allocation of public funds needs to be fair, open, and documented; the evaluation is complex and subject to public sector regulations for public engagement in R&D funding. This calls for a rigorous evaluation process. This paper proposes an operational three-staged decision support system (DSS) to assist decision-makers in public funding institutions in the ex-ante evaluation of R&D proposals for large-scale close-to-market projects in energy research. The system was developed based on a review of literature and related approaches from practice combined with a series of workshops with practitioners from German public funding institutions. The results confirm that the decision-making process is a complex one that is not limited to simply scoring R&D proposals. Decision-makers also have to deal with various additional issues such as determining the state of technological development, verifying market failures or considering existing funding portfolios. The DSS that is suggested in this paper is unique in the sense that it goes beyond mere multi-criteria aggregation procedures and addresses these issues as well to help guide decision-makers in public institutions through the evaluation process.
Roadmaps for India's energy future foresee that coal power will continue to play a considerable role until the middle of the 21st century. Among other options, carbon capture and storage (CCS) is being considered as a potential technology for decarbonising the power sector. Consequently, it is important to quantify the relative benefits and trade-offs of coal-CCS in comparison to its competing renewable power sources from multiple sustainability perspectives. In this paper, we assess coal-CCS pathways in India up to 2050 and compare coal-CCS with conventional coal, solar PV and wind power sources through an integrated assessment approach coupled with a nexus perspective (energy-cost-climate-water nexus). Our levelized costs assessment reveals that coal-CCS is expensive and significant cost reductions would be needed for CCS to compete in the Indian power market. In addition, although carbon pricing could make coal-CCS competitive in relation to conventional coal power plants, it cannot influence the lack of competitiveness of coal-CCS with respect to renewables. From a climate perspective, CCS can significantly reduce the life cycle GHG emissions of conventional coal power plants, but renewables are better positioned than coal-CCS if the goal is ambitious climate change mitigation. Our water footprint assessment reveals that coal-CCS consumes an enormous volume of water resources in comparison to conventional coal and, in particular, to renewables. To conclude, our findings highlight that coal-CCS not only suffers from typical new technology development related challenges - such as a lack of technical potential assessments and necessary support infrastructure, and high costs - but also from severe resource constraints (especially water) in an era of global warming and the competition from outperforming renewable power sources. Our study, therefore, adds a considerable level of techno-economic and environmental nexus specificity to the current debate about coal-based large-scale CCS and the low carbon energy transition in emerging and developing economies in the Global South.
Direct air capture (DAC) combined with subsequent storage (DACCS) is discussed as one promising carbon dioxide removal option. The aim of this paper is to analyse and comparatively classify the resource consumption (land use, renewable energy and water) and costs of possible DAC implementation pathways for Germany. The paths are based on a selected, existing climate neutrality scenario that requires the removal of 20 Mt of carbon dioxide (CO2) per year by DACCS from 2045. The analysis focuses on the so-called "low-temperature" DAC process, which might be more advantageous for Germany than the "high-temperature" one. In four case studies, we examine potential sites in northern, central and southern Germany, thereby using the most suitable renewable energies for electricity and heat generation. We show that the deployment of DAC results in large-scale land use and high energy needs. The land use in the range of 167-353 km2 results mainly from the area required for renewable energy generation. The total electrical energy demand of 14.4 TWh per year, of which 46% is needed to operate heat pumps to supply the heat demand of the DAC process, corresponds to around 1.4% of Germany's envisaged electricity demand in 2045. 20 Mt of water are provided yearly, corresponding to 40% of the city of Cologne's water demand (1.1 million inhabitants). The capture of CO2 (DAC) incurs levelised costs of 125-138 EUR per tonne of CO2, whereby the provision of the required energy via photovoltaics in southern Germany represents the lowest value of the four case studies. This does not include the costs associated with balancing its volatility. Taking into account transporting the CO2 via pipeline to the port of Wilhelmshaven, followed by transporting and sequestering the CO2 in geological storage sites in the Norwegian North Sea (DACCS), the levelised costs increase to 161-176 EUR/tCO2. Due to the longer transport distances from southern and central Germany, a northern German site using wind turbines would be the most favourable.
The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.
CCS is discussed in a broad sense throughout Europe. In this paper a cautious, conservative estimate of CO2 storage capacity for Germany and its neighbouring countries where CO2 emissions from Germany could possibly be stored (Netherlands, France, Denmark, Norway, UK and Poland) is presented. Such a lower limit calculation is necessary for orientation purposes for potential investors and political decision-makers.
Conservative CO2 sequestration capacity in deep saline aquifers for Germany is derived by the volumetric approach where parameters such as efficiency factor, CO2 density, porosity of the geological formation are of interest. It is assumed that every geological system is closed and thus an efficiency factor of 0.1 per cent (based on maximum pressure increase and total compressibility) for saline aquifers is applied. The capacity of German depleted oil and gas fields is based on cumulative recovery data and a sweep efficiency of 75 per cent. The storage capacity in the other considered countries, adjacent to Germany, are based on a critical review and adjustment of the results of the European reports JOULE II, GESTCO and GeoCapacity.
The conservative capacities for all countries together amount to 49 Gt CO2, from which Norway and the UK provide 36 Gt, all offshore in the North Sea. Compared to the emissions from large point sources in these countries during 40 years (47.6 Gt of CO2), a virtual balance is achieved. This can only be reached, if a large scale CO2 pipeline system is installed to connect these countries, especially Germany, to the large sinks in the North Sea. If additional restrictions like source-sink matching, acceptance issues and injection rates constraints are taken into account, the available storage space gets increasingly scarce.
Der Ergebnisbericht dokumentiert in Kapitel 2 die in diesem Forschungsvorhaben durchgeführten Arbeiten an dem von der TU Delft entwickelten agentenbasierten Strommarktmodell EMLab-Generation, das als Open-Source Modell konzipiert ist. Einen zentralen Aspekt bildet die Übertragung des Modells, das ursprünglich die beiden Regionen CWE (Central-Western- Europe) und UK umfasste, auf ein Modell mit den beiden Regionen Deutschland und Europa (ohne Deutschland), im Wesentlichen in den Grenzen der EU28. Diese Übertragung ist die Grundlage für die Untersuchung unterschiedlicher Fragestellungen hinsichtlich der zukünftigen Entwicklung des Strommarkts in Deutschland innerhalb des europäischen Verbundnetzes bei hohen Anteilen fluktuierender erneuerbarer Energien an der Stromerzeugung.
Nach der Darstellung der konkreten Zielsetzung und der Grundlagen des vorhandenen Modells werden im Hauptteil (Kapitel 2.3) die eigenen Modellierungsarbeiten (Datenaufbereitung, Modellierung und "lessons learned") beschrieben. Im Anschluss erfolgt eine kurze Darstellung einer noch in Erarbeitung befindlichen Masterarbeit zur Berücksichtigung von Risikoaspekten innerhalb des Investitionsalgorithmus' von EMLab-Generation, die sich aus dem internationalen ABM-Workshop als offene methodische Fragestellung von Strommarktmodellen ergeben hat (Kapitel 2.4). Kapitel 2.5 gibt eine kritische Einschätzung der erreichten Modellierungsergebnisse sowie weitere mögliche Anwendungen der neu konzipierten Modellregionen.
Kapitel 3 gibt anschließend einen Überblick über die in diesem Vorhaben durchgeführten gemeinsamen Workshops zwischen TU Delft und Wuppertal Institut sowie den internationalen Workshop, an dem fünf Forschungseinrichtungen aus Deutschland sowie die TU Delft erstmals ihre Erfahrungen mit ABM-Strommarktmodellierung austauschten und methodischen Forschungsbedarf aufarbeiteten.
Der Bericht schließt mit einer kurzen Zusammenfassung sowie einem Ausblick auf weitere Forschungsarbeiten, mit denen die im Rahmen dieser Anbahnungsmaßnahme begonnene Kooperation zwischen Wuppertal Institut und TU Delft fortgesetzt werden soll.
There is an increasing pressure that enhanced and novel energy technologies are swiftly adopted by the market to ensure meeting the energy and climate targets. An important issue with such novel developments is their risk to be stuck in the "valley of death", i.e. that their transition to the market is delayed or unsuccessful. Publicly supported demonstration projects could help to bridge the valley of death by reducing barriers to the adoption caused by missing information and perceived risks. A challenge for technology demonstrations in the industrial context is their often high investments that are required to prove their real-world benefits. Given the magnitude of such investments, it becomes crucial that public funding focuses on the most promising demonstration proposals. Structured evaluation processes can help to facilitate the identification of promising proposals and to improve the quality and transparency of decisions. This paper deals with a corresponding multi-staged multi-criteria decision support system (DSS) suggested to the German Federal Ministry for Economic Affairs and Energy. It deals with the evaluation of demonstration proposals across three stages: The first stage represents a filtering stage to identify those proposals relevant for further considerations. The second stage comprises a multi-criteria scoring method drawing on an evaluation against nineteen criteria. The final third stage serves to critically review the need for public funding of well-scored proposals. This contribution outlines the development of the DSS and its design and thus provides insights on proposal evaluating in energy research.
Carbon capture and storage
(2009)
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
Especially in the arid areas of the Middle East and North Africa (MENA), water availability plays an important role in the expansion planning of industrial-scale solar power plants. Although power plants may account for only a very small portion of local water demand, competition for water with other sectors is expected to increase when water resources are insufficient for meeting local needs. This can lead to conflicts between different users (such as communities, farmers, tourism, businesses and utilities). Despite the increasing attention on the water-energy nexus, comprehensive studies analysing the interdependencies and potential conflicts between energy and water at the local level are absent.
To examine the linkages between water resources and energy technologies at the local level, this case study was selected because Morocco is one of the countries most affected by water scarcity and, at the same time, it is also one of the most promising countries in North Africa for the development of renewable energies and offers excellent conditions for solar and wind power plants. Nevertheless, the country's electricity system is still largely based on conventional energy sources, and the country is more than 95% dependent on energy imports. To strengthen the country's energy security and reduce the financial burden associated with energy imports, Morocco is pursuing an ambitious renewable energy expansion strategy: by 2020, around 42% of the national electricity demand should be met by renewable energies. In view of Morocco's ambitious plans, it is particularly important to identify the potential conflicts and synergies resulting from the expansion of renewable energies in relation to the water sector.
This report was prepared by the Wuppertal Institute in cooperation with the German Economic Institute as part of the SCI4climate.NRW project. The report aims to shed light on the possible phenomenon that the availability and costs of "green" energy sources may become a relevant location factor for basic materials produced in a climate-neutral manner in the future.
For this purpose, we introduce the term "Renewables Pull". We define Renewables Pull as the initially hypothetical phenomenon of a shift of industrial production from one region to another as a result of different marginal costs of renewable energies (or of secondary energy sources or feedstocks based on renewable energies).
Shifts in industrial production in the sense of Renewables Pull can in principle be caused by differences in the stringency of climate policies in different countries, as in the case of Carbon Leakage. Unlike Carbon Leakage, however, Renewables Pull can also occur if similarly ambitious climate policies are implemented in different countries. This is because Renewables Pull is primarily determined by differences in the costs and availability of renewable energies. In addition, Renewables Pull can also be triggered by cost reductions of renewable energies and by changing preferences on the demand side towards climate-friendly products. Another important difference to Carbon Leakage is that the Renewables Pull effect does not necessarily counteract climate policy.
Similar to Carbon Leakage, it is to be expected that Renewables Pull could become relevant primarily for very energy-intensive products in basic materials industries. In these sectors (e.g. in the steel or chemical industry), there is also the possibility that relocations of specific energy-intensive parts of the production process could trigger domino effects. As a result, large parts of the value chains previously existing in a country or region could also be subjected to an (indirect) Renewables Pull effect.
For the federal state of NRW, in which the basic materials industry plays an important role, the possible emergence of Renewables Pull is associated with significant challenges as climate policy in Germany, the EU and also worldwide is expected to become more ambitious in the future.
This report aims to enable and initiate a deeper analysis of the potential future developments and challenges associated with the Renewables Pull effect. Thus, in the final chapter of the report, several research questions are formulated that can be answered in the further course of the SCI4climate.NRW project as well as in other research projects.
Ende Dezember 2008 wurde im Europäischen Parlament die "Richtlinie über die geologische Speicherung von CO2" (auch als CCS-Richtlinie bezeichnet) verabschiedet, die eine Schlüsselrolle für die Entwicklung und die Umsetzung von Projekten der CO2-Abscheidung und -Speicherung (CCS) spielt. Der Artikel erläutert den Zusammenhang der CCS-Richtlinie mit dem Energie- und Klimapaket der EU, stellt die wesentlichen Inhalte der Richtlinie vor, zeigt die energiewirtschaftlichen Implikationen auf und arbeitet heraus, welche Regelungen zur Umsetzung der Richtlinie nun vom deutschen Gesetzgeber erfolgen müssen.
One of the main objectives of impact assessments is to identify potentially significant impacts. However, determining this significance has received very limited attention as a procedural step in social impact assessments. Consequently, only limited research and documentation exists on approaches, survey tools and evaluation methods, especially with regard to participatory approaches and combined participatory-technical approaches. This study aims to address this research gap by developing and applying a joined participatory and technical impact significance evaluation. The approach is applied in a case study which analysed the livelihood impacts of the large-scale concentrated solar power plant NOORO I in Ouarzazate, Morocco.
The analysis shows that although different approaches and significance criteria must be applied when involving both local stakeholders and experts, the linked analysis offers more robust results and an improved basis for decision-making. Furthermore, it was observed in the case study that impacts affecting the social, cultural and political spheres were more often considered significant than impacts affecting the physical and material livelihood dimensions. Regarding sustainability assessments of large-scale renewable energy plants, these findings underline the importance (as for other large-scale infrastructure developments) of placing greater emphasis on the inclusion of social aspects in impact assessments.
Direct Air Capture (DAC) is increasingly being discussed as a possibility to limit climate change. In this study, a possible rollout of the DAC technology at German coastal areas is analysed based on an existing climate neutrality scenario. For the year 2045 the resulting costs as well as land, water and energy consumption are examined. It is concluded that a realization of the DAC technology in Germany might be possible from a technical point of view. However, there is a high demand for land and energy. Since a rollout is needed to start in 20 years at the latest, the required discussion and evaluation should be initiated as quickly as possible.
Um den Klimawandel begrenzen zu können, wird zunehmend der Einsatz von Direct Air Capture (DAC) zur Erzeugung von Negativemissionen diskutiert. Anhand von Kosten sowie dem Flächen-, Wasser- und Energieverbrauch werden in diesem Artikel mögliche Implementierungspfade der DAC-Technologie, aufbauend auf einem bestehenden Klimaneutralitätsszenario für Deutschland, analysiert. Während die technische Realisierung machbar sein sollte, stellt der hohe Flächen- und Energiebedarf eine kritische Größe dar.
Several energy scenario studies consider concentrated solar power (CSP) plants as an important technology option to reduce the world's CO2 emissions to a level required for not letting the global average temperature exceed a threshold of 2–2.4 °C. A global ramp up of CSP technologies offers great economic opportunities for technology providers as CSP technologies include highly specialised components. This paper analyses possible value creation effects resulting from a global deployment of CSP until 2050 as projected in scenarios of the International Energy Agency (IEA) and Greenpeace International. The analysis focuses on the economic opportunities of German technology providers since companies such as Schott Solar, Flabeg or Solar Millennium are among the leading suppliers of CSP technologies on the global market.
Das Wuppertal Paper beschreibt die Planung einer neuen modernen Beleuchtungsanlage für eines der Hauptgebäude der Universität Osnabrück (Allgemeines Verfügungszentrum AVZ mit 11.241 m2 Hauptnutzfläche) im Jahre 1996 und entwickelt ein Modell für ein Einspar-Contracting zur Finanzierung der neuen Anlage.
Der Kleinverbrauchssektor, zu dem die Universitäten gehören, war zu der Zeit mit rund 18 % am Endenergieverbrauch Deutschlands beteiligt. Im Hochschulbereich liegen die größten Stromverbräuche in der Beleuchtung (Anteil 30 %) und im Lüftungsbereich (Anteil 25 %). Nach Studien in Schleswig-Holstein, Österreich und der Schweiz sowie von hessischen Modelluntersuchungen an Schulen und Verwaltungsgebäuden sind "besonders hohe Einsparungen bei der Optimierung von Lüftungsanlagen und der Beleuchtung erreichbar".
In den Kapiteln 1-8 wird zunächst allgemein dargestellt, wie Stromverbrauch, einsparpotential sowie Betriebskosten von Beleuchtungsanlagen ermittelt werden können, welche Hemmnisse bei der Umsetzung speziell im öffentlichen Bereich bestehen und wie Einspar-Contracting hier ansetzen kann. Zudem werden Wirtschaftlichkeitsberechnungen für die Investition in eine neue Anlage besprochen. Die Einsparanalyse beruht auf der Schweizer Norm SIA 380/4.
In den Kapiteln 9-18 werden anschließend die vorher beschriebenen Sachverhalte anhand eines Beispiels aus der Praxis mit Leben gefüllt. Für das AVZ der Universität Osnabrück wird untersucht, welches Stromeinsparpotential bei der dort installierten veralteten Beleuchtungsanlage aus den 70er Jahren bestand, warum es trotz zehnjähriger Bemühungen der Universität nicht umgesetzt werden konnte und wie ein Contracting-Verfahren helfen könnte.
Considering the traditional coal-based energy infrastructure in the German state North Rhine-Westphalia the question arises how to face the needs of embanking climate change. To reduce greenhouse gas intensive electricity generation in the Ruhr area, the introduction of carbon capture and storage (CCS) is an option of particular relevance. The paper investigates and discusses possibilities of setting up a CCS infrastructure in NRW. It shall clarify whether, and possibly how, highly efficient conventional fossil fired power plants could be refitted with CO2 capture to flexibly react to potentially changing climate policy conditions and to keep up with the market.
Als Direct Air Capture (DAC) werden Technologien zur Abscheidung von Kohlendioxid aus der Atmosphäre bezeichnet. Diese könnten zunehmend zum Einsatz kommen, um CO2 für Power-to-X-Prozesse (PtX) oder zur Erzielung "negativer Emissionen" bereitzustellen. Die Ergebnisse einer multidimensionalen Bewertung im Rahmen der BMWi-Studie "Technologien für die Energiewende" (et 09/2018) zeigen, dass noch große Unsicherheiten bestehen und die Entwicklung überwiegend an Deutschland vorbeigeht.
Facing the uncertainty of CO2 storage capacity in China by developing different storage scenarios
(2016)
China is very active in the research and development of CO2 capture and storage technologies (CCS). However, existing estimates for CO2 storage capacity are very uncertain. This uncertainty is due to limited geological knowledge, a lack of large-scale research on CO2 injection, and different assessment approaches and parameter settings. Hence storage scenarios represent a method that can be used by policy makers to demonstrate the range of possible storage capacity developments, to help interpret uncertain results and to identify the limitations of existing assessments. In this paper, three storage scenarios are developed for China by evaluating China-wide studies supplemented with more detailed site- and basin-specific assessments. It is estimated that the greatest storage potential can be found in deep saline aquifers. Oil and gas fields may also be used. Coal seams are only included in the highest storage scenario. In total, the scenarios presented demonstrate that China has an effective storage capacity of between 65 and 1551 Gt of CO2. Furthermore, the authors emphasise a need for action to harmonise storage capacity assessment approaches due to the uncertainties involved in the capacity assessments analysed in this study.
Innerhalb des Projekts TFE-NRW bewertete das Wuppertal Institut den Forschungsbedarf für Energiewende-Technologien in Nordrhein-Westfalen. Ziel war es herauszufinden, welche Technologien und Forschungsbereiche im Rahmen der Energieforschung für Nordrhein-Westfalen (NRW) einen besonders hohen Stellenwert in Relation zur Bewertung für Deutschland haben könnten und für die eine besondere Unterstützung innerhalb der Energieforschung gerechtfertigt erscheint. Dabei sollten die speziellen Anforderungen des Bundeslandes berücksichtigt werden.
Betrachtet wurden 31 Technologiefelder aus den Bereichen erneuerbare Energien, konventionelle Kraftwerke, Infrastruktur, Technologien für die Sektorenkopplung (Power-to-X, P2X), energie- und ressourceneffiziente Gebäude, Energie- und Ressourceneffizienz in der Industrie und integrative Aspekte, die mithilfe eines Kriterienrasters qualitativ bewertet wurden.
Carbon capture and storage (CCS) might be an important climate protection technology for coal-rich countries. This paper presents first results of a systemic and long-term analysis of a future CCS implementation in India. It focuses on potential storage formations in the geological subsurface and the geographic match of these sinks with CO2 emissions of current and future largepoint power plants. The analysis is framed by an overview on India’s position on CCS, ongoing Indian research and development projects as well as its international activities.
The geological potential for CO2 sequestration in India is subject to large uncertainty because, so far, only few studies estimated it in a vague manner. A first meta-analysis shows that there is a huge variation between 48 Gt and 572 Gt of CO2. The main differences between the evaluated studies are the assumed capacities for deep saline aquifers and basalt formations. Taking the ongoing discussion and the existing uncertainties into account, the storage potential might be provided only by aquifers (in the range of 44 to 360 Gt of CO2) and hydrocarbon fields (2 to 7 Gt of CO2).
The amount of CO2 emissions possibly available for sequestration is assessed by applying three substantially different long-term energy scenarios for India. These scenarios, indicating pathways between a "low carbon" and a "high carbon" development until 2050, result in cumulated CO2 emissions between 30 and 171 Gt if all new large-scaled power plants will be based on CCS from 2020 on. Compared with the sink capacities, only the CO2 emissions of scenario S2 (30 Gt) could theoretically be stored with high certainty. Considering the scenarios S3 and S1, their CO2 emissions (94 Gt and 171 Gt, respectively) could only be sequestered if the aquifer capacity would prove to be usable. Geological storage sites do not appear to be located close to sources in South West, Central, North and North East India. This first rough analysis means that only those CO2 emissions occurring in the Western parts of North and West India, the Eastern part of South India as well as the South part of East India might be suited for sequestration nearby.
A more detailed source-sink matching will follow in the next phase of the project, including results of expert meetings in India. Furthermore, this analysis will be complemented by an additional assessment from economic, ecological and resource-strategic points of view, which might further affect the potential for CCS.
Transponder-based Aircraft Detection Lighting Systems (ADLS) are increasingly used in wind turbines to limit beacon operation times, reduce light emissions, and increase wind energy acceptance. The systems use digital technologies such as receivers of digital transponder signals, LTE/5G, and other information and communication technology. The use of ADLS will be mandatory in Germany both for new and existing wind turbines with a height of >100 m from 2023 (onshore) and 2024 (offshore), so a nationwide rollout is expected to start during 2022. To fully realize the benefits while avoiding risks and bottlenecks, a thorough and holistic understanding of the efforts required and the impacts caused along the life cycle of an ADLS is essential. Therefore, this study presents the first multi-aspect holistic evaluation of an ADLS. A framework for evaluating digital applications in the energy sector, previously developed by the authors, is refined and applied. The framework is based on multi-criteria analysis (MCA), life cycle assessment (LCA), and expert interviews. On an aggregated level, the MCA results show an overall positive impact from all stakeholders’ perspectives. Most positive impacts are found in the society and politics category, while most negative impacts are of technical nature. The LCA of the ADLS reveals a slightly negative impact, but this impact is negligible when compared to the total life cycle impact of the wind turbines of which the ADLS is a part. Besides the aggregated evaluation, detailed information on potential implementation risks, bottlenecks, and levers for life cycle improvement are presented. In particular, the worldwide scarcity of the required semiconductors, in combination with the general lack of technicians in Germany, lead to the authors’ recommendation for a limited prolongation of the planned rollout period. This period should be used by decision-makers to ensure the availability of technical components and installation capacities. A pooling of ADLS installations in larger regions could improve plannability for manufacturers and installers. Furthermore, an ADLS implementation in other countries could be supported by an early holistic evaluation using the presented framework.
The development of digital technologies is accelerating, enabling increasingly profound changes in increasingly short time periods. The changes affect almost all areas of the economy as well as society. The energy sector has already seen some effects of digitalization, but more drastic changes are expected in the next decades. Besides the very positive impacts on costs, system stability, and environmental effects, potential obstacles and risks need to be addressed to ensure that advantages can be exploited while adverse effects are avoided. A good understanding of available and future digital applications from different stakeholders' perspectives is necessary. This study proposes a framework for the holistic evaluation of digital applications in the energy sector. The framework consists of a combination of well-established methods, namely the multi-criteria analysis (MCA), the life cycle assessment (LCA), and expert interviews. The objective is to create transparency on benefits, obstacles, and risks as a basis for societal and political discussions and to supply the necessary information for the sustainable development and implementation of digital applications. The novelty of the proposed framework is the specific combination of the three methods and its setup to enable sound applicability to the wide variety of digital applications in the energy sector. The framework is tested subsequently on the example of the German smart meter roll-out. The results reveal that, on the one hand, the smart meter roll-out clearly offers the potential to increase the system stability and decrease the carbon emission intensity of the energy system. Therefore, the overall evaluation from an environmental perspective is positive. However, on the other hand, close attention needs to be paid to the required implementation and operational effort, the IT (information technology) and data security, the added value for the user, the social acceptance, and the realization of energy savings. Therefore, the energy utility perspective in particular results in an overall negative evaluation. Several areas with a need for action are identified. Overall, the proposed framework proves to be suitable for the holistic evaluation of this digital application.
Il Wuppertal Institute ha condotto uno studio per valutare quali materiali sono da considerare critici in relazione al previsto incremento di energie rinnovabili in Germania. I problemi relativi a materiali come terre rare e vanadio riguardano la dipendenza da pochi paesi fornitori e gli usi competitivi.
Green hydrogen and synthetic fuels are increasingly recognized as a key strategic element for the progress of the global energy transition. The Middle East and North Africa (MENA) region, with its large wind and solar potential, is well positioned to generate renewable energy at low cost for the production of green hydrogen and synthetic fuels, and is therefore considered as a potential future producer and exporter. Yet, while solar and wind energy potentials are essential, other factors are expected to play an equally important role for the development of green hydrogen and synthetic fuels (export) sectors. This includes, in particular, adequate industrial capacities and infrastructures. These preconditions vary from country to country, and while they have been often mentioned in the discussion on green hydrogen exports, they have only been examined to a limited extent. This paper employs a case study approach to assess the existing infrastructural and industrial conditions in Jordan, Morocco, and Oman for the development of a green hydrogen and downstream synthetic fuel (export) sector.
This article presents an integrated assessment conducted in order to explore whether carbon capture and storage (CCS) could be a viable technological option for significantly reducing future CO2 emissions in South Africa. The methodological approach covers a commercial availability analysis, an analysis of the long-term usable CO2 storage potential (based on storage capacity assessment, energy scenario analysis and source-sink matching), an economic and ecological assessment and a stakeholder analysis. The findings show, that a reliable storage capacity assessment is needed, since only rough figures concerning the effective capacity currently exist. Further constraints on the fast deployment of CCS may be the delayed commercial availability of CCS, significant barriers to increasing the economic viability of CCS, an expected net maximum reduction rate of the power plant's greenhouse gas emissions of 67%-72%, an increase in other environmental and social impacts, and low public awareness of CCS. One precondition for opting for CCS would be to find robust solutions to these constraints, taking into account that CCS could potentially conflict with other important policy objectives, such as affordable electricity rates to give the whole population access to electricity.
If the current energy policy priorities are retained, there may be no need to focus additionally on carbon capture and storage (CCS) in the power plant sector of Germany. This applies even in the case of ambitious climate protection targets, according to the results of the presented integrated assessment study. These cover a variety of aspects: Firstly, the technology is not expected to become available on a large scale in Germany before 2025. Secondly, if renewable energies and combined heat and power are expanded further and energy productivity is enhanced, there is likely to be only a limited demand for CCS power plants, as a scenario analysis of CCS deployment in Germany shows. Thirdly, cost analysis using the learning curve approach shows that the electricity generation costs of renewable electricity approach those of CCS power plants. This leads to the consequence that, from 2020, several renewable technologies may well be in a position to offer electricity at a cheaper rate than CCS power plants. In addition, a review of new life cycle assessments for CO2 separation in the power plant sector indicates that the greenhouse gas emissions from 1 kW h of electricity generated by first-generation CCS power plants could only be reduced by 68 % to 87 % (95 % in individual cases). Finally, a cautious, conservative estimate of the effective German CO2 storage capacity of approximately 5 billion tonnes of CO2 is calculated, including a fluctuation range yielding values between 4 and 15 billion tonnes of CO2. Therefore, the total CO2 emissions caused by large point sources in Germany could be stored for 12 years (basic value) or for 8 or 33 years (sensitivity values).
The study presents the results of an integrated assessment of carbon capture and storage (CCS) in the power plant sector in Germany, with special emphasis on the competition with renewable energy technologies. Assessment dimensions comprise technical, economic and environmental aspects, long-term scenario analysis, the role of stakeholders and public acceptance and regulatory issues. The results lead to the overall conclusion that there might not necessarily be a need to focus additionally on CCS in the power plant sector. Even in case of ambitious climate protection targets, current energy policy priorities (expansion of renewable energies and combined heat and power plants as well as enhanced energy productivity) result in a limited demand for CCS. In case that the large energy saving potential aimed for can only partly be implemented, the rising gap in CO2 reduction could only be closed by setting up a CCS-maximum strategy. In this case, up to 22% (41 GW) of the totally installed load in 2050 could be based on CCS. Assuming a more realistic scenario variant applying CCS to only 20 GW or lower would not be sufficient to reach the envisaged climate targets in the electricity sector. Furthermore, the growing public opposition against CO2 storage projects appears as a key barrier, supplemented by major uncertainties concerning the estimation of storage potentials, the long-term cost development as well as the environmental burdens which abound when applying a life-cycle approach. However, recently, alternative applications are being increasingly considered–that is the capture of CO2 at industrial point sources and biomass based energy production (electricity, heat and fuels) where assessment studies for exploring the potentials, limits and requirements for commercial use are missing so far. Globally, CCS at power plants might be an important climate protection technology: coal-consuming countries such as China and India are increasingly moving centre stage into the debate. Here, similar investigations on the development and the integration of both, CCS and renewable energies, into the individual energy system structures of such countries would be reasonable.
The main objective of this article is to evaluate CO2 mitigation potential and to calculate costs avoided by the use of different CO2 mitigation technologies in China's cement sector, namely energy efficiency improvements, use of alternative fuels, clinker substitution and carbon capture and storage (CCS). Three scenarios are designed based on the projection of cement output and technology development over the next 40 years (2010–2050). 2.5, 4.7 and 4.3 Gt tonnes of CO2 will be saved totally in basic scenario and two low carbon scenarios up to 2050. By comparing these technologies along the scenarios, it can be concluded that CO2 emissions can mainly be reduced by energy efficiency improvements and use of alternative fuels. Clinker substitution, which reduces the clinker-to-cement ratio as well as energy intensity, results in significant cost advantages. CCS, including post-combustion capture and oxy-fuel combustion capture, could play an important role in the capture of CO2 in the cement industry, and is expected to be in commercial use by 2030.
The transformation processes towards a sustainable development are complex. How can science contribute towards new solutions and ideas leading to change in practice? The authors of this book discuss these questions along the energy transition in the building sector.
A transformative research that leaves the neutral observer position needs appropriate concepts and methods: how can knowledge from different disciplines and from practice be integrated in order to be able to explain and understand complex circumstances and interrelations? What role do complex (agent-based) models and experiments play in this respect? Which mix of methods is required in transformative science in order to actively support the actors in transformation processes?
Theses questions are illustrated by the example of the BMBF funded project "EnerTransRuhr".
Für die Umsetzung der Energiewende und speziell den Ausbau erneuerbarer Energien sind nicht nur energiewirtschaftliche oder Klimaschutz-Kriterien maßgeblich. Zu einer umfassenden Nachhaltigkeitsbewertung gehört unter anderem auch die Ressourcenbewertung. Hier ist unstrittig, dass die Gesamt-Ressourceninanspruchnahme eines Energiesystems generell erheblich niedriger ist, wenn dieses nicht auf fossilen, sondern auf erneuerbaren Energien basiert (und dabei nicht hauptsächlich auf Biomasse ausgerichtet ist). Bisher wurde jedoch insbesondere der Verbrauch und die langfristige Verfügbarkeit der mineralischen Rohstoffe, die in der Regel zur Herstellung von Energiewandlern und Infrastruktur benötigt werden, wenig untersucht.
Im Rahmen des Projekts KRESSE wurde daher erstmals analysiert, welche "kritischen" mineralischen Rohstoffe für die Herstellung von Technologien, die Strom, Wärme und Kraftstoffe aus erneuerbaren Energien erzeugen, bei einer zeitlichen Perspektive bis zum Jahr 2050 in Deutschland relevant sind. Die Einschätzung als "kritisch" umfasst dabei die langfristige Verfügbarkeit der identifizierten Rohstoffe, die Versorgungssituation, die Recyclingfähigkeit und die Umweltbedingungen der Förderung. Die Studie macht deutlich, dass die geologische Verfügbarkeit mineralischer Rohstoffe für den geplanten Ausbau der erneuerbaren Energien in Deutschland grundsätzlich keine limitierende Größe darstellt. Dabei kann jedoch möglicherweise nicht jede Technologievariante unbeschränkt zum Einsatz kommen.
Im Forschungsprojekt "Landscaping" untersuchte das Wuppertal Institut die für Nordrhein-Westfalen aus heutiger Sicht denkbaren Technologieansätze, die dafür nötigen politischen Rahmenbedingungen sowie mögliche Innovationen entlang der Wertschöpfungsketten. Bestandteil des Berichts sind Steckbriefe, in denen die möglichen Technologien für treibhausgasneutrale Industrieprozesse samt offener Forschungsfragen und Infrastrukturbedarfe dargestellt sind. Das Projekt entstand im Auftrag des Ministeriums für Wirtschaft, Innovation, Digitalisierung und Energie des Landes Nordrhein-Westfalen.
Water availability plays an important role in the expansion planning of utility-scale solar power plants, especially in the arid regions of the Middle East and North Africa. Although these power plants usually account for only a small fraction of local water demand, competition for water resources between communities, farmers, companies, and power suppliers is already emerging and is likely to intensify in future. Despite this, to date there has been a lack of comprehensive studies analyzing interdependencies and potential conflicts between energy and water at local level. This study addresses this research gap and examines the linkages between water resources and energy technologies at local level based on a case study conducted in Ouarzazate, Morocco, where one of the largest solar power complexes in the world was recently completed. To better understand the challenges faced by the region in light of increased water demand and diminishing water supply, a mixed-method research design was applied to integrate the knowledge of local stakeholders through a series of workshops. In a first step, regional socio-economic water demand scenarios were developed and, in a second step, water saving measures to avoid critical development pathways were systematically evaluated using a participatory multi-criteria evaluation approach. The results are a set of water demand scenarios for the region and a preferential ranking of water saving measures that could be drawn upon to support decision-making relating to energy and water development in the region.
Zur Realisierung der europäischen Klimaschutzziele muss der Industriesektor, besonders die energieintensive Grundstoffindustrie, seine Treibhausgasemissionen stark reduzieren. Obwohl in der Vergangenheit bereits große Fortschritte erzielt wurden, sind in Zukunft weitere, teils bahnbrechende Innovationen und der Aufbau der dafür benötigten Infrastruktur erforderlich. Im Rahmen dieses Projekts stellt das Wuppertal Institut für die "European Climate Foundation" den aktuellen Wissensstand zum Thema zusammen, diskutiert diesen vor dem Hintergrund der aktuellen Situation für Nordrhein-Westfalen (NRW), erstellt konsistente mögliche Zukunftsszenarien für NRW und leitet Schlüsselfragen und weiteren Forschungsbedarf für die Region ab.
Wo werden zukünftig grüner Wasserstoff und synthetische Kraftstoffe produziert? Zu welchen Kosten können diese erzeugt werden? Und welchen Anteil hätte eine heimische Produktion daran? Die Ergebnisse der Studie MENA-Fuels zeigen, dass im Nahen Osten und Nordafrika langfristig sehr große kostengünstige Potenziale für grünen Strom, Wasserstoff und Synfuels bestehen. Die Berücksichtigung von Investitionsrisiken hat jedoch einen signifikanten Einfluss auf deren Kosten und damit auf die Wahl der potenziellen Exportländer.
The energy sector today accounts for about 10% to 15% of global freshwater withdrawal. Most water in the energy sector is used for generating electricity, especially for cooling processes in thermal power plants. At the same time the demand for electricity is expected to increase significantly due to population growth and economic development in emerging and developing economies. Growing demand is also driven by electrification strategies pursued by industrialized countries to decarbonize their economies. With the global demand for electricity expected to increase significantly in the coming decades also the water demand in the power sector is expected to rise. However, due to the on-going global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty because the volume of water required for electricity generation varies significantly depending on both the generation technology and cooling system. In light of these challenges the objective of this analysis is to provide more systematic and robust answers in terms of the impacts of different decarbonization strategies in the electricity sector on water demand at global and regional level. The focus is on operational water use for electricity generation.
Prospects of carbon capture and storage (CCS) in China's power sector : an integrated assessment
(2015)
Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in China. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. Each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 34 and 221 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country’s CO2 storage potential are applied, 192 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken, this figure falls to 29 Gt of CO2. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in China; a significant barrier to achieving the economic viability of CCS due to a currently non-existing nation-wide CO2 pricing scheme that generates a sufficiently strong price signal; an expected life-cycle reduction rate of the power plant's greenhouse gas emissions of 59-60%; and an increase in most other negative environmental and social impacts. Conclusion and practice implications: Most experts expect a striking dominance of coal-fired power generation in the country's electricity sector, even if the recent trend towards a flattened deployment of coal capacity and reduced annual growth rates of coal-fired generation proves to be true in the future. In order to reduce fossil fuel-related CO2 emissions to a level that would be consistent with the long-term climate protection target of the international community to which China is increasingly committing itself, this option may require the introduction of CCS. However, a precondition for opting for CCS would be finding robust solutions to the constraints highlighted in this article. Furthermore, a comparison with other low-carbon technology options may be useful in drawing completely valid conclusions on the economic, ecological and social viability of CCS in a low-carbon policy environment. The assessment dimensions should be integrated into macro-economic optimisation models by combining qualitative with quantitative modelling, and the flexible operation of CCS power plants should be analysed in view of a possible role of CCS for balancing fluctuating renewable energies.
Prospects of carbon capture and storage (CCS) in India's power sector : an integrated assessment
(2014)
Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in India. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. However, each dimension is investigated using specific methods (graphical abstract).
Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data since only rough figures concerning the theoretical capacity exist at present. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 13 and 111 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country's CO2 storage potential are applied, 75 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken by considering the country's effective storage potential, only a fraction may potentially be sequestered. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in India, a significant barrier to achieving the economic viability of CCS, an expected net maximum reduction rate of the power plant’s greenhouse gas emissions of 71-74%, an increase of most other environmental and social impacts, and a lack of governmental, industrial or societal CCS advocates.
Conclusion and practice implications: Several preconditions need to be fulfilled if CCS is to play a future role in reducing CO2 emissions in India, the most crucial one being to determine reliable storage capacity figures. In order to overcome these barriers, the industrialised world would need to make a stronger commitment in terms of CCS technology demonstration, cooperation and transfer to emerging economies like India. The integrated assessment might also be extended by a comparison with other low-carbon technology options to draw fully valid conclusions on the most suitable solution for a sustainable future energy supply in India.
It is now widely recognized that effective communication and demand-side policies for alternative energy require sound knowledge of preferences and determinants of demand of the public and consumers. To date, public attitudes towards new transport technologies have been studied under very different conceptual frameworks. This paper gives an overview of the various conceptual frameworks and methodologies used, where four main approaches can be distinguished: general attitudinal surveys, risk perception studies, non-market economic valuation studies, and other approaches such as those based on semiotic theory. We then review the findings of the recent literature on acceptance, attitudes and preferences for hydrogen and fuelcell end-use technologies, focusing on vehicles. These studies are then contrasted with related research into alternative fuel vehicles. The paper finally discusses the main trends in research and avenues for further work in this field. We recommend, among other things, the use of approaches that build knowledge and familiarity with the technology prior to the exploration of attitudes, and the set up of studies that take a whole-systems perspective of hydrogen technologies and that look at hydrogen in the context of other competing clean technologies.
Damit sich die weltweit zunehmend ambitionierten Klimaschutzziele erreichen lassen, müssen auch im Industriesektor weitgehende Emissionsreduktionen innerhalb weniger Jahrzehnte realisiert werden. Expertinnen und Experten sind sich einig, dass dies nicht ohne den Umstieg von fossilen auf erneuerbare Energieträger und Rohmaterialien - sogenannte Feedstocks - umsetzbar ist. Im Zuge der verstärkten Nutzung dieser grünen Energieträger ist denkbar, dass sich deren Verfügbarkeit und Kosten zu immer wichtigeren Standortfaktoren für die Produktion industrieller Güter entwickeln werden. Dies könnte dazu führen, dass zukünftig Standorte mit kostengünstiger Verfügbarkeit von erneuerbaren Energien attraktiver gegenüber anderen Standorten werden und es dann zu Standortverlagerungen kommt - insbesondere im Bereich der energieintensiven Industrie.
In dem vorliegenden Artikel greifen die Autoren diese möglichen Verlagerungen industrieller Produktion auf. In diesem Zusammenhang führen sie auch den Begriff "Renewables Pull" ein. Die in bestimmten Regionen der Welt kostengünstig und in großen Mengen verfügbaren erneuerbaren Energien könnten nach Ansicht der Autoren künftig eine Sogwirkung auslösen und bestimmte Teile der industriellen Produktion anziehen - auch Pull-Effekt genannt.
For many years, carbon capture and storage (CCS) has been discussed as a technology that may make a significant contribution to achieving major reductions in greenhouse gas emissions. At present, however, only two large-scale power plants capture a total of 2.4 Mt CO2/a. Several reasons are identified for this mismatch between expectations and realised deployment. Applying bibliographic coupling, the research front of CCS, understood to be published peer-reviewed papers, is explored to scrutinise whether the current research is sufficient to meet these problems. The analysis reveals that research is dominated by technical research (69%). Only 31% of papers address non-technical issues, particularly exploring public perception, policy, and regulation, providing a broader view on CCS implementation on the regional or national level, or using assessment frameworks. This shows that the research is advancing and attempting to meet the outlined problems, which are mainly non-technology related. In addition to strengthening this research, the proportion of papers that adopt a holistic approach may be increased in a bid to meet the challenges involved in transforming a complex energy system. It may also be useful to include a broad variety of stakeholders in research so as to provide a more resilient development of CCS deployment strategies.
This study conducted by Wuppertal Institute and Germanwatch explores how the social pillar of sustainability at the local level could be met in Concentrated Solar Power (CSP) projects. For this purpose, the authors evaluate the livelihood dimension of CSP technology based on a case study conducted on the 160 MW pilot CSP plant Nooro I in Ouarzazate, Morocco.
Many countries are increasingly investing in renewable energy technologies to meet growing energy demands and increase the security of their energy supply. This development is also evident in the Middle East and North Africa (MENA) region, where renewable energy targets and policies have evolved rapidly in recent years. There is a steady increase in both the number of planned and implemented solar photovoltaic (PV) but also of solar thermal projects in form of Concentrating Solar Power (CSP) plants. Many of these installations are designed as large utility-scale systems. Despite the fact that these types of large-scale projects can have significant effects on local communities and their livelihoods, the existing research into the social impacts of such large-scale renewable energy infrastructures at local level is limited. However, assessing and managing these impacts is becoming increasingly important to reduce risks to both the affected communities and to the project and businesses activities. In order to provide more robust evidence on the local effects, this research study reviews the social impacts of large-scale renewable energy infrastructure in the MENA region based on a case study of the NOORo I CSP plant in Ouarzazate, Morocco. Data collected during two empirical field studies, in combination with expert interviews and secondary data analysis, provides detailed evidence on the type and significance of livelihood impacts of the NOORo I CSP plant. The analysis results in a consolidated list of 30 impacts and their significance levels for different stakeholder groups including farmers, young people, women, community representatives and owners of small and medium enterprises. The results show that, overall, the infrastructure development was received positively. The review also indicates that factors identified as having effects on the sustainability of local livelihoods are mainly related to information management and benefit distribution, rather than physical or material aspects.
In dem Forschungsprojekt "Technologien für die Energiewende" (TF_Energiewende) bewertet ein Konsortium von drei Verbundpartnern und zehn Technologiepartnern unter der Federführung des Wuppertal Instituts seit Herbst 2016 den mittelfristigen Forschungs- und Entwicklungsbedarf für die zentralen Technologien, die im Rahmen der Energiewende derzeit und zukünftig benötigt werden.
Eine zukünftige Herausforderung der Energiewende wird darin bestehen, zunehmende Stromnetzeinspeisungen von fluktuierenden erneuerbaren Energien (FEE) in das Energiesystem zu integrieren. Neben den Flexibilitäten im Stromsystem sollten dabei auch die Möglichkeiten des Wärmemarktes zur Stabilisierung des Strommarktes berücksichtigt werden. So können Kraft-Wärme-Kopplungs-Anlagen (KWK), Elektroheizer und Wärmepumpen als Verbindungstechnologien zwischen Strom- und Wärmemarkt abhängig vom FEE-Dargebot und damit auch den Preissignalen des Strommarktes zu- bzw. abgeschaltet werden. Dazu werden Wärmespeicher benötigt, da die Flexibilisierung nur möglich ist, wenn die Produktion von der Wärmenutzung entkoppelt werden kann. Eine besonders aussichtsreiche Kopplung von Strom- und Wärmemarkt ist im Bereich der Fernwärmesysteme möglich, da sich hier große Energiemengen in Fernwärmespeichern im Vergleich zu dezentralen Lösungen kostengünstiger und effizienter speichern lassen.
Der Politikbericht ist ein Ergebnis des Forschungsvorhabens "Technologien für die Energiewende", das vom Bundesministerium für Wirtschaft und Energie (BMWi) als Teil des strategischen Leitprojekts "Trends und Perspektiven der Energieforschung" von 2016 bis 2018 gefördert wurde. Er enthält neben einer kurzen deutschen und englischen Einleitung vierseitige Zusammenfassungen zu jedem der 31 analysierten Technologiefelder und eine Kurzdarstellung der Bewertungsmethodik. Die Zusammenfassungen sind gegliedert nach Definition des Technologiefeldes, aktueller Stand der Technologie, ausgewählte Bewertungskriterien und F&E-Empfehlungen.
Der Teilbericht 2 enthält alle 31 Technologieberichte, die im Forschungsvorhaben "Technologien für die Energiewende" erstellt wurden. Für jedes Technologiefeld wird der Entwicklungsstatus und der Bedarf an Forschung und Entwicklung dargestellt. Die Bewertung erfolgte mittels 12 Bewertungskriterien, die nach dem klimapolitischen und energiewirtschaftlichen Beitrag der jeweiligen Technologien fragen, die Positionierung deutscher Unternehmen im internationalen Kontext betrachten sowie die Systemkompatibilität bewerten. Hinzu kommen Aspekte der gesellschaftlichen Akzeptanz sowie des Standes von F&E im internationalen Vergleich.
Band 1 enthält die Technologieberichte aus den Bereichen Erneuerbare Energien, konventionelle Kraftwerke und Infrastruktur.
Der Teilbericht 2 enthält alle 31 Technologieberichte, die im Forschungsvorhaben "Technologien für die Energiewende" erstellt wurden. Für jedes Technologiefeld wird der Entwicklungsstatus und der Bedarf an Forschung und Entwicklung dargestellt. Die Bewertung erfolgte mittels 12 Bewertungskriterien, die nach dem klimapolitischen und energiewirtschaftlichen Beitrag der jeweiligen Technologien fragen, die Positionierung deutscher Unternehmen im internationalen Kontext betrachten sowie die Systemkompatibilität bewerten. Hinzu kommen Aspekte der gesellschaftlichen Akzeptanz sowie des Standes von F&E im internationalen Vergleich.
Band 2 enthält die Technologieberichte aus den Bereichen Sektorenkopplung, Energie- und Ressourceneffizienz in Gebäuden sowie in der Industrie und integrative Aspekte.
Im Herbst 2018 wird das neue Energieforschungsprogramm (EFP) der Bundesregierung verabschiedet. Das Forschungsprojekt "Technologien für die Energiewende", kurz TF_Energiewende, hat hierfür eine wesentliche wissenschaftliche Basis geliefert. Für 31 Technologiefelder, die mehrere Hundert Technologien umfassen, analysierten die Projektpartner das Innovations- und Marktpotenzial, bewerteten Chancen und Risiken sowie den möglichen Beitrag der Technologien zur Umsetzung der Energiewende und zeigten Forschungs- und Entwicklungsbedarf auf. Die nun veröffentlichten Ergebnisse dienen gleichzeitig als umfassendes Nachschlagewerk für Entscheider in Unternehmen, Forschungsabteilungen, Fördergeber und die interessierte Fachöffentlichkeit.
Concentrated solar power (CSP) plants are one of several renewable energy technologies with significant potential to meet a part of future energy demand. An integrated technology assessment shows that CSP plants could play a promising role in Africa and Europe, helping to reach ambitious climate protection goals. Based on the analysis of driving forces and barriers, at first three future envisaged technology scenarios are developed. Depending on the underlying assumptions, an installed capacity of 120 GWel, 405 GWel or even 1,000 GWel could be reached globally in 2050. In the latter case, CSP would then meet 13–15% of global electricity demand. Depending on these scenarios, cost reduction curves for North Africa and Europe are derived. The cost assessment conducted for two virtual sites in Algeria and in Spain shows a long-term reduction of electricity generating costs to figures between 4 and 6 ct/kWhel in 2050. The paper concludes with an ecological analysis based on life cycle assessment. Although the greenhouse gas emissions of current (solar only operated) CSP systems show a good performance (31 g CO2-equivalents/kWhel) compared with advanced fossil-fired systems (130–900 CO2-eq./kWhel), they could further be reduced to 18 g CO2-eq./kWhel in 2050, including transmission from North Africa to Europe.
A significant reduction in greenhouse gas emissions will be necessary in the coming decades to enable the global community to avoid the most dangerous consequences of man-made global warming. This fact is reflected in Germany's 7th Federal Energy Research Program (EFP), which was adopted in 2018. Direct Air Capture (DAC) technologies used to absorb carbon dioxide (CO2) from the atmosphere comprise one way to achieve these reductions in greenhouse gases. DAC has been identified as a technology (group) for which there are still major technology gaps. The intention of this article is to explore the potential role of DAC for the EFP by using a multi-dimensional analysis showing the technology's possible contributions to the German government's energy and climate policy goals and to German industry's global reputation in the field of modern energy technologies, as well as the possibilities of integrating DAC into the existing energy system. The results show that the future role of DAC is affected by a variety of uncertainty factors. The technology is still in an early stage of development and has yet to prove its large-scale technical feasibility, as well as its economic viability. The results of the multi-dimensional evaluation, as well as the need for further technological development, integrated assessment, and systems-level analyses, justify the inclusion of DAC technology in national energy research programs like the EFP.
The German Energiewende is a deliberate transformation of an established industrial economy towards a nearly CO2-free energy system accompanied by a phase out of nuclear energy. Its governance requires knowledge on how to steer the transition from the existing status quo to the target situation (transformation knowledge). The energy system is, however, a complex socio-technical system whose dynamics are influenced by behavioural and institutional aspects, which are badly represented by the dominant techno-economic scenario studies. In this paper, we therefore investigate and identify characteristics of model studies that make agent-based modelling supportive for the generation of transformation knowledge for the Energiewende. This is done by reflecting on the experiences gained from four different applications of agent-based models. In particular, we analyse whether the studies have improved our understanding of policies' impacts on the energy system, whether the knowledge derived is useful for practitioners, how valid understanding derived by the studies is, and whether the insights can be used beyond the initial case-studies. We conclude that agent-based modelling has a high potential to generate transformation knowledge, but that the design of projects in which the models are developed and used is of major importance to reap this potential. Well-informed and goal-oriented stakeholder involvement and a strong collaboration between data collection and model development are crucial.
Electricity generation requires water. With the global demand for electricity expected to increase significantly in the coming decades, the water demand in the power sector is also expected to rise. However, due to the ongoing global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty, because the volume of water required for electricity generation varies significantly depending on both the generation technology and the cooling system. This study shows the implications of ambitious decarbonization strategies for the direct water demand for electricity generation. To this end, water demand scenarios for the electricity sector are developed based on selected global energy scenario studies to systematically analyze the impact up to 2040. The results show that different decarbonization strategies for the electricity sector can lead to a huge variation in water needs. Reducing greenhouse gas emissions (GHG) does not necessarily lead to a reduction in water demand. These findings emphasize the need to take into account not only GHG emission reductions, but also such aspects as water requirements of future energy systems, both at the regional and global levels, in order to achieve a sustainable energy transition.
Die Transformationsprozesse hin zu einer nachhaltigen Entwicklung sind komplex.
Wie kann Wissenschaft dazu beitragen, dass neue Lösungen und Ideen in der Praxis zu Veränderung führen? Dieser Frage gehen die Autorinnen und Autoren am Beispiel der Gebäudeenergiewende nach. Eine transformative Forschung, die den neutralen Beobachterposten verlässt, braucht entsprechende Konzepte und Methoden: Wie kann Wissen aus unterschiedlichen Disziplinen und aus der Praxis integriert werden, um komplexe Sachverhalte und Zusammenhänge zu erklären und zu verstehen? Welche Rolle spielen komplexe (agentenbasierte) Modelle und Experimente dabei? Wie sieht der Methodenmix einer transformativen Wissenschaft aus, die Akteure bei Transformationsprozessen aktiv unterstützt? Illustriert werden diese Fragen am Beispiel des vom BMBF geförderten Forschungsprojektes "EnerTransRuhr".
Eine oft kontrovers diskutierte Frage ist, ob eine massive Dämmung von Häusern in der Gesamtbilanz nicht mehr Ressourcenverbrauch und Emissionen verursacht, als sie im Endeffekt einspart. Zur Untersuchung dieser Frage wurde nun erstmals eine trade-off Analyse durchgeführt. Hierzu wurde ein bottom-up Wirkungsanalyse-Modell entwickelt, dessen Kern ein Emissions- und Energiemodell für den Haushaltssektor bildet, gekoppelt mit einem Ökobilanzierungs-Tool. Den Rahmen für beide Modelle bilden Energieszenarien bis 2050, die für jede Dekade Sanierungsraten und Energiemixe vorgeben. Damit können "reine" Energieszenarien um ressourcenpolitische Analysen erweitert und die Auswirkungen verschiedener Dämmstrategien ermittelt werden.
Das zentrale Ergebnis der Modellierung ist, dass zusätzliche Aufwendungen für Dämmstoffe (untersucht wurden extrudierter Polystyrolhartschaum XPS und Zellulose) sowohl ressourcen- als auch emissionsseitig in fast allen Umweltwirkungskategorien durch erhebliche Einsparungen bei der Gebäudebeheizung überkompensiert werden. Im Wesentlichen sind keine Trade-offs erkennbar und der prozentuale Beitrag der Dämmstoffe an den Umweltwirkungsindikatoren ist gering. Relevant ist dagegen die Wahl des Treibmittels bei den aufgeschäumten XPS-Dämmstoffen: Gegenüber dem in Deutschland verwendeten XPS, das weitgehend mit CO2 aufgeschäumt wird, führt ein Dämmstoff, der hohe Anteile an Fluorkohlenwasserstoffen aufweist, zu einem hohen Trade-off bezüglich der Wirkungskategorie "stratosphärischer Ozonabbau" und zu einer erkennbaren, jedoch nicht so deutlichen Wirkung auf das Treibhaus-Potenzial. Eine Sensitivitätsanalyse mit dem alternativen Dämmmaterial Zellulose zeigt, dass sich die an sich schon geringen Anteile der Dämmstoffe an den Umweltwirkungsindikatoren weiter verringern. Hinsichtlich der Materialintensität sind XPS- und Zellulose-Dämmung jedoch mit vergleichbaren Auswirkungen verbunden.
Zusammenfassend lässt sich festhalten, dass für beide Materialien ambitionierte Dämmstoffstrategien im Hinblick auf alle in dieser Studie analysierten Faktoren einen wesentlichen Beitrag sowohl zu Materialeffizienz- als auch zu Emissionsminderungszielen leisten können.
Um das vom Weltklimarat (IPCC) geforderte 2°C-Ziel einhalten zu können, ist eine Reduktion der globalen CO2-Emissionen um 80% bis 2050 gegenüber dem Stand von 1990 zwingend notwendig. Hierbei wird auch solarthermischen Kraftwerken eine immer größere Bedeutung beigemessen. Im BLUE Map-Szenario der Internationalen Energieagentur (IEA), das von einer CO2-Reduktion um 50% bis 2050 gegenüber 2005 ausgeht, müssen im Jahr 2050 ca. 11% (4.754 TWh) des weltweiten Strombedarfs durch Sonnenenergie gedeckt werden (IEA 2008). Neben Photovoltaik sollen solarthermische Kraftwerke (Concentrated Solar Power, CSP) etwa 46% (ca. 2.200 TWh) der prognostizierten Menge an Solarstrom erzeugen. Im Energy[R]evolution Szenario von Greenpeace International und EREC (European Renewable Energy Council) aus dem Jahr 2008 werden rund 6.000 TWh an CSP-Strom im Jahr 2050 angenommen (bei einer installierten Leistung von 801 GW), während andere Studien bis zu 1.000 GW installierter Leistung in 2050 betrachten (Viebahn et al. 2010). Die DESERTEC-Initiative gibt ein Ziel von 5.000 GW installierter Leistung im Jahr 2050 vor.
Der Export von CSP-Technologien in die "Sunbelt"-Regionen bietet große Chancen für deutsche Anlagenbauer. So sind u.a. Schott Solar, die Ferrostaal Group mit ihrem Geschäftssegment "Solar Energy", Flagsol, die Solar Power Group, Solar Millenium und Fichtner Solar auf dem Gebiet CSP aktiv. Schott Solar (Receiver) und Flabeg (Spiegel) haben eine weltweit führende Markstellung inne. Große deutsche Energieversorger und Anlagenbauer wie E.On, RWE und Siemens gehören zum Industriekonsortium der Desertec Industrial Initiative, die den Ausbau von CSP in der MENA-Region vorantreiben will. Die Initiative wurde von der Münchener Rück angestoßen.
In diesem Artikel wird dargestellt, welche Aktivitäten deutsche Unternehmen entlang der Wertschöpfungskette bislang aufweisen und wie ihre Marktstellung im Vergleich zu führenden internationalen Unternehmen zu bewerten ist. Anschließend wird auf Basis von vorliegenden Energieszenarien ermittelt, welche messbaren ökonomischen Effekte für deutsche Unternehmen, z.B. zusätzliche Wertschöpfung und die Schaffung neuer Arbeitsplätze, aus den genannen Potentialen resultieren. Die Ergebnisse basieren auf einer Studie des Wuppertal Instituts, die im Auftrag von Greenpeace Deutschland und der DESERTEC Foundation erstellt wurde.