Refine
Year of Publication
- 2021 (45) (remove)
Document Type
- Report (24)
- Peer-Reviewed Article (8)
- Contribution to Periodical (6)
- Working Paper (5)
- Part of a Book (1)
- Doctoral Thesis (1)
Division
- Kreislaufwirtschaft (45) (remove)
Die kommende Bundesregierung muss aus ambitionierten Zielen eine erfolgreiche Ressourcen- und Klimapolitik machen und dabei alle Bürgerinnen und Bürger mitnehmen - so das Fazit des Zukunftsimpulses des Wuppertal Instituts zur Bundestagswahl 2021. Es zeigt, welche Maßnahmen notwendig sind, um die Transformation in eine klimafreundliche und ressourcenleichte Zukunft jetzt konsequent einzuleiten.
Im Zeitalter der Machine Economy ist der maschinelle Dialog allgegenwärtig - das bietet neue Chancen für Nachhaltigkeit, erhöht gleichzeitig aber durch die zugrundeliegenden Technologien auch den Druck auf unsere Umwelt. Internet of Things (IoT), Künstliche Intelligenz (KI) und Distributed Ledger Technology (DLT) sind das technologische Fundament der Machine Economy. Damit verbunden sind Infrastrukturen, Datenströme und Anwendungen, die hohe Energie- sowie Ressourcenaufwände erzeugen. Der derzeitige politische Diskurs sowie die Nachhaltigkeitsforschung fokussieren sich auf Umweltwirkungen durch digitale Infrastrukturen. Daten, Applikationen sowie die Rolle von Akteuren als Treiber der Umweltwirkung werden zu wenig beleuchtet. In diesem Papier sprechen sich die Autorinnen und Autoren für eine "Grüne Governance der Machine Economy" aus. Adressiert werden Annahmen zu systemübergreifenden Treibern von Umweltbelastungen und ihrer Wirkung. Ziel ist es, ein Gesamtsystem nachhaltiger Entscheidungen und ein ökologisches Zusammenspiel aller beteiligten Technologien in der Wertschöpfung zu ermöglichen. Zukünftige Forschung soll die hier vorgestellten Hypothesen weiter ausarbeiten und konkrete Handlungsoptionen für eine Stakeholder übergreifende Roadmap erarbeiten.
Ohne die Transformation unserer Wirtschaft in eine nachhaltige Kreislaufwirtschaft werden wir die planetaren Grenzen weiter überschreiten, die Klimaziele verfehlen und die Ökosysteme schädigen. Deutschlands Politik hat sich in einem Flickenteppich aus Strategien und Gesetzen verfangen, aus dem eine echte Kreislaufwirtschaft nicht in der notwendigen Geschwindigkeit hervorgehen kann. Der Versuch, einer verschwenderischen Wirtschaft allein mit den Mitteln des Abfallrechts beizukommen, kann nicht glücken.
Nötig ist vielmehr eine ganzheitliche, übergeordnete deutsche Kreislaufwirtschaftsstrategie mit ambitionierten nationalen Zielen. Das vorliegende Papier will zeigen, was sich konkret verändern muss und welche Hebel es braucht, um die Kreislaufwirtschaft signifikant voranzubringen.
Es ist Zeit zu handeln. Innovative Ideen, Konzepte und Forderungen liegen auf dem Tisch. Sie machen es möglich, Deutschland auf eine zirkuläre Zukunft auszurichten, Rohstoffe und Materialien konsequent im Kreislauf zu führen und der Wirtschaft Planungssicherheit zu geben. Kreislaufwirtschaft ist Zukunftswirtschaft. Sie muss Kernthema einer neuen Regierung werden.
The ultimate goal of German Resource Efficiency Programme (ProgRess) is to make the extraction and use of natural resources more sustainable and reduce associated environmental pollution as much as possible. By doing this - also with responsibility towards future generations - the programme should create a prerequisite for securing a long-term high quality of life. To bring the policy approaches formulated in ProgRess to reality, efforts to implement resource efficiency measures have to be increased at all levels - from international to regional to local.
The chapter intends to provide an impetus for the current debate on ProgRess policy development. The chapter identifies, analyses and describes deficits and possibilities of vertical integration of the German programme in particular and derives recommendations for action which may also serve as indications for other strategies. The following sections are based on results of the advisory report "Vertical integration of the national resource efficiency programme ProgRess (VertRess)", conducted by the German Institute of Urban Affairs (Difu) and the Wuppertal Institute for Climate, Environment and Energy on behalf of the German Environmental Agency (UBA) and the Federal Ministry of the Environment, Nature Conservation and Nuclear Safety (BMU).
Nowadays, high expectations are set for a digitally enabled circular economy (CE), to enhance resource efficiency. Tracing, tracking, and storing information is most important for this. In this paper, the application of Internet of Things (IoT) and Distributed Ledger Technology (Blockchain) are hence discussed by presenting the case of professional Electrical and Electronic Equipment (EEE) in Italy. Within the context of CE, prevention of electronic waste (WEEE) is extremely relevant as it is a fast-growing waste stream, and the products contain environmentally damaging substances as well as valuable and rare materials. The use of a proper combination of IoT and blockchain can help the producers to keep control on products until EEE end-of-life, while promoting CE strategies and supporting decision-making. Based on the outcomes of five interviews conducted in 2019 to companies of the EEE sector, potential improvements in the EEE end-of-use management are discussed. After providing the definition of requirements for both the technical solution and its testing are provided, three solution variations and the related business models are created and presented, as well as considerations on their environmental and economic impacts. The study shows how digital technologies can support the appropriate and circular management of EEE products and WEEE.
With increasing world population and an unsettling resource scarcity in the back, sustainble consumption has moved to the foreground of political, economical and social discussions. One major school-of-thought is Circular Economy (CE), an approach summarizing various sustainable consumption activites under one roof. However, quantitative studies on the consumer are rare, yet crucial for a transfer from linear to circular consumption. This dissertation adds to literature by providing pioneer insights into consumer behavior in CE as an overarching concept, instead limiting research on singular subconcepts. Namely, four consumer activities are studied: recycling, upcycling, renting and sharing. In order to identify relevant insights for both academics and practitioners in CE, the research question ("what drives participation in CE?") is broken down into sub-hypotheses, which are addressed by three empirical studies. Using the SOR-Model (adaption Belk 1975) as overarching logic, the three studies deal with (1) the consumer (and their motivation) and situational stimuli (both (2) offline and (3) online). Respectively, three data sets are consulted to assess the sub-hypotheses and to identify overarching insights on how to accelerate consumer participation in CE, The research methodology employed ranges from a structured equation model (SEM), a random allocation field experiment during Fashion Week in Berlin to a discrete-choice model with best-worst scaling. The dissertation succeeds in revealing that (1) different activities in CE can be summarized in one latent variable, proving CE as a wholesome concept in consumer-related activities; that (2) Trust has a leveraging effect on participation in CE activities. Further, Trust can be enhanced offline via face-to-face interaction and online via third-party online attributes.; and that (3) experience in CE activities affects perception of online attributes, implying the need for adapted measures when dealing with CE-unexperienced consumers as compared to consumers with prior experience in CE activities.
Transformative Innovationen : die Suche nach den wichtigsten Hebeln der Großen Transformation
(2021)
Der hier vorliegende Zukunftsimpuls soll den Grundgedanken der Transformativen Innovationen und ihre Notwendigkeit beschreiben sowie erste Kandidaten für solche Transformativen Innovationen aus diversen Arbeitsbereichen des Wuppertal Instituts vorstellen. Er dient vor allem als Einladung, gemeinsam mit dem Wuppertal Institut über solche Innovationen zu diskutieren, die irgendwo zwischen den großen Utopien und kleinen Nischenaktivitäten liegen. Denn es braucht nicht immer den ganz großen Wurf, um Veränderungen in Gang zu setzen.
Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.
The transport sector accounts for 20 per cent of the greenhouse gas emissions in Germany and it is therefore key to success for German climate policy. At present, however, there is no other sector with a wider gap in missing the trajectory to climate neutrality. The present study, conducted on behalf of Huawei within the project "Shaping the Digital Transformation - Digital Solution Systems for the Sustainability Transition", points out new pathways towards a sustainable and climate friendly transition of the transport sector. The report specifies concrete options to follow up on the ambitious goals of the new coalition agreement to foster clean and digital mobility solutions.
The authors refined eight theses on how digitalisation can foster sustainable mobility solutions and how to shape a supporting policy framework, which is aligning the financial and regulatory guardrails for ramping up a sustainable mobility system while gradually phasing down the usage of private cars.
The need for a transition towards a circular economy (CE) is evident, as the current economic model is based on the exploitation of far more resources than the planet can replenish sustainably. A significant part of this economic transition is the inception of new, CE-oriented startups and business activities. While business model frameworks (BMF), such as the Business Model Canvas (BMC), were at the center of discussions about structuring business ideas in the beginning of the millennium, the conversation must now shift towards circular BMFs (CBMF). This paper follows the Design Research Methodology (DRM) for an empirical approach to devising a novel CBMF, including expert interviews as well as a first application of the framework with a startup. Throughout this process, a new and innovative tool called Circular Business Framework (CBF) was created and tested based on CE principles.
Mit dem Ziel, das Kunststoffrecycling weiter zu steigern, wurden in diesem Vorhaben die Verfahren und Prozesse der werkstofflichen Verwertung von Kunststoffabfällen in den Blick genommen - von der Sortierung über die Aufbereitung bis hin zu einem erneuten Einsatz in der Produktion. Ausgehend von der Beschreibung des Standes der Technik wurden mögliche, innovative technische Optimierungspotenziale identifiziert und dargestellt, die zur Verbesserung der Rezyklatqualitäten und ihren Einsatzmöglichkeiten in Neuprodukten beitragen können. Für eine Bewertung der Umweltwirkungen der technischen Innovationen im Vergleich zum Stand wurden ökobilanzielle Berechnungen vorgenommen.
Mit dem Ziel, das Kunststoffrecycling weiter zu steigern, wurden in diesem Vorhaben die Verfahren und Prozesse der werkstofflichen Verwertung von Kunststoffabfällen in den Blick genommen - von der Sortierung über die Aufbereitung bis hin zu einem erneuten Einsatz in der Produktion. Ausgehend von der Beschreibung des Standes der Technik wurden mögliche, innovative technische Optimierungspotenziale identifiziert und dargestellt, die zur Verbesserung der Rezyklatqualitäten und ihren Einsatzmöglichkeiten in Neuprodukten beitragen können. Für eine Bewertung der Umweltwirkungen der technischen Innovationen im Vergleich zum Stand wurden ökobilanzielle Berechnungen vorgenommen.
Seitdem Einweg-Plastikartikel wie Kunststofftüten und Strohhalme verboten wurden, sind Straßen und Strände sauberer geworden. Zudem wurde auch die öffentliche Diskussion über nachhaltigen Konsum intensiviert. Die Gesamtmenge an Kunststoff-Abfällen ließ sich mit "Plastikverboten" hingegen nicht signifikant reduzieren. Zu diesem Ergebnis kommt der vorliegende Polyproblem-Report der gemeinnützigen Röchling Stiftung und des Beratungshauses Wider Sense in Zusammenarbeit mit dem Wuppertal Institut. Die Autor*innen haben die Wirkung staatlicher Verbote von Einweg-Plastikprodukten unter die Lupe genommen und die Erfahrungen aus Deutschland, Kenia und Kalifornien analysiert.
The first step of complete transformation will be utilizing digital technologies and applications to improve current procedures, processes, and structures (Improve). Next, complete digitalisation will pave the way for new business models and framework conditions (Convert). Finally, comprehensive transformation of the economy and value creation will ensure the effective reorientation of society and lifestyles towards sustainability (Transform). This last step is critical for a successful ecological transformation, or a "green transformation", must be placed front and centre during international debate.
Through this report, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we will discuss three exemplary areas of ecological transformation where action is necessary: 1) A digital and circular economy that uses data to increase resource efficiency. 2) Intelligent, sustainable mobility that connects us in eco-friendly ways. 3) Transparent transitions towards sustainable food chains and agriculture.
This report represents the first phase of the Shaping Digital Transformation project. In this report, we will outline the framework of our project to create a starting point for further debates.
By use of macro-economic model EXIOMOD, the expected impacts of actions described in the Strategic Research and Innovation Agenda (SRIA) have been analyzed. The results of this analysis show that the R&I actions described in the SRIA contribute to decoupling economic growth from resource use. The actions are expected to cause an increasing gross domestic product and a decreasing raw material demand. This results in an increasing extracted resource productivity, a measure used to show the decoupling of economic growth and resource use. It can however be questioned whether the actions in the SRIA - or the measures implemented in the model - assume a strong enough pace for decoupling economic growth and material use. The actions contribute to the climate goals of the European Commission, by showing a pathway through which the emissions of greenhouse gas can be reduced.
This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.