Refine
Year of Publication
Document Type
- Conference Object (133) (remove)
Division
- Energie-, Verkehrs- und Klimapolitik (133) (remove)
The EU Horizon 2020 project HiEff-BioPower (grant agreement No 727330, duration: 10/2016 - 09/2021) aimed at the development of a new, innovative, fuel flexible and highly efficient biomass CHP technology for a capacity range of 1 to 10 MW total energy output, suitable e.g. for on-site generation at larger residential apartment buildings or local heat grids. The new technology shall define a new milestone in terms of CHP efficiency and contribute to a sustainable energy supply based on renewable energies using otherwise unused residual biomass. It consists of a fuel-flexible updraft gasification technology with ultra-low particulate matter emissions, an integrated gas cleaning system and a solid oxide fuel cell (SOFC). The technology shall be applicable for a wide fuel spectrum for residual biomass (wood pellets, wood chips or selected agricultural fuels like agro-pellets) and achieve high gross electric (40%) and overall (90%) efficiencies as well as almost zero gaseous and particulate matter (PM) emissions (close or below the level of detection) as non-energy benefits. At the end of the project, final technology data has become available, as well as techno-economic analyses and market studies. Based on this data, this paper presents final results from the environmental impact assessment of the new HiEff-BioPower technology.
Future of car-sharing in Germany : customer potential estimation, diffusion and ecological effect
(2007)
Contemporary combined heat and power (CHP) systems are often based on fossil fuels, such as natural gas or heating oil. Thereby, small-scale cogeneration systems are intended to replace or complement traditional heating equipment in residential buildings. In addition to space heating or domestic hot water supply, electricity is generated for the own consumption of the building or to be sold to the electric power grid.
The adaptation of CHP-systems to renewable energy sources, such as solid biomass applications is challenging, because of feedstock composition and heat integration. Nevertheless, in particular smallscale CHP technologies based on biomass gasification and solid oxide fuel cells (SOFCs) offer significant potentials, also regarding important co-benefits, such as security of energy supply as well as emission reductions in terms of greenhouse gases or air pollutants. Besides emission or air quality regulations, the development of CHP technologies for clean on-site small-scale power generation is also strongly incentivised by energy efficiency policies for residential appliances, such as e.g. Ecodesign and Energy Labelling in the European Union (EU). Furthermore, solid residual biomass as renewable local energy source is best suited for decentralised operations such as micro-grids, also to reduce long-haul fuel transports. By this means such distributed energy resource technology can become an essential part of a forward-looking strategy for net zero energy or even smart plus energy buildings.
In this context, this paper presents preliminary impact assessment results and most recent environmental considerations from the EU Horizon 2020 project "FlexiFuel-SOFC" (Grant Agreement no. 641229), which aims at the development of a novel CHP system, consisting of a fuel flexible smallscale fixed-bed updraft gasifier technology, a compact gas cleaning concept and an SOFC for electricity generation. Besides sole system efficiencies, in particular resource and emission aspects of solid fuel combustion and net electricity effects need to be considered. The latter means that vastly less emission intensive gasifier-fuel cell CHP technologies cause significant less fuel related emissions than traditional heating systems, an effect which is further strengthened by avoided emissions from more emission intensive traditional grid electricity generation. As promising result, operation "net" emissions of such on-site generation installations may be virtually zero or even negative. Additionally, this paper scopes central regulatory instruments for small-scale CHP systems in the EU to discuss ways to improve the framework for system deployment.
Refrigerators and freezers (subsumed under the term "cold appliances") are among the most widely used electrical appliances in the residential sector all around the world. Currently, about 1.4 billion domestic cold appliances worldwide use about 650 TWh electricity, which is 1.2 times Germany’s total electricity consumption, and cause CO2 emissions of 450 million tons of CO2eq.
Although the specific electricity consumption per volume of cold appliances has decreased during recent years due to technical progress and policy instruments like labelling and eco-design requirements, total worldwide energy consumption of these appliances is on the increase. Scenario calculations were carried out for 10 world regions by the Wuppertal Institute. Results show that about half of the energy consumption could be saved with the most energy-efficient appliances available today, and even higher savings will be possible with next generation technologies by 2030. According to the analysis, these savings are usually very cost-effective.
All these aspects are part of the new website "bigEE.net - Your guide to energy efficiency in buildings" which aims to provide information about technical options but also about policies to support the development of energy-efficient appliances.
To initiate and foster market transformation of energy-efficient appliances it is highly advisable for policymakers to generate appliances-specific policy packages. Since each regional market has its specificity (e.g. energy prices, typical appliance affecting the cost effectiveness of efficient appliances), the barriers for the market transformation of single product groups are also specific and need to be addressed by appropriate policies and measures. Elements of measures to build appropriate specific policy packages for refrigerators will be presented in the paper, and the refrigerator package from California (USA) demonstrates the successful implementation of a sector-specific package.
To achieve the EU's energy efficiency targets, both the rate of building energy renovation and its depth, i.e., the amount of energy savings post renovation need to be improved. Energy Performance Certificates (EPCs) are key to make energy efficiency measures transparent for the building market and to promote the energy efficiency of buildings through renovation. The revision of the Energy Performance of Buildings Directive (EPBD) is seen as a pre-condition to meet the Renovation Wave objectives and to reach a highly energy efficient and decarbonized building stock by 2050. One focus of the current revision of the EPBD is therefore the improvement of EPCs. QualDeEPC - High-quality Energy Performance Assessment and Certification in Europe Accelerating Deep Energy Renovation, funded under the EU's Horizon 2020 programme, is a project that aims to improve EPCs. Following an EU-wide review of existing EPC schemes, and extensive stakeholder discussions in the seven partner countries, QualDeEPC found that EPCs and EPC schemes need to enhance particularly in the following three ways:
1. Establish a close link between EPCs and deep energy renovation
2. Improve the quality of EPC schemes, i.e., both the EPCs and their data, and the processes of assessment, certification, verification
3. Improve cross-EU convergence of EPC schemes.
How are neighbours doing? : Making energy efficiency efforts comparable through NEEAP screening
(2012)
How much energy saving is 1 % per year? : We still don t know, but we know better how to find out
(2009)
Innovation and diffusion of car-sharing for sustainable consumption and production of urban mobility
(2008)
International comparison of energy labeling and standards for energy efficient and green buildings
(2011)
In spite of differences in energy policies and supply, Japan and Germany have to master similar challenges: To reorganize the energy supply system towards - in the long term - being reliable, affordable, low in risks and resource use, and climate-neutral. At the same time, the ecological modernization should maintain or even strengthen international competitiveness. To better address these challenges, a bi-national expert council has been established between the two high-tech countries in 2016 - the GJETC.
The aim of the GJETC is to show that despite different starting points, a national energy transition can be more successful, if both countries learn from their strengths and also weaknesses, to avoid the latter. If the implementation of an energy transition in the two countries is socially and economically sound and advances technology innovation and deployment, it may not only double success, but can also serve as blue prints for other countries, especially due to learning from similarities and differences. For example: Why is per capita energy consumption higher in transport in Germany, but energy intensity higher in Japan's building sector? How can variable renewable energies be integrated in an efficient energy system at lowest costs?
The Council meets twice a year, holds stakeholder dialogues and outreach events, and prepares policy papers on strategic topics of mutual interest. Four comprehensive studies, each in cooperation of a German and a Japanese research institute, have been the basis for 15 joint key recommendations during the 1st phase. The 2nd phase to 2020 will study the role of hydrogen and digitalisation for the energy transition, as well as other topics. The paper presents the findings and recommendations of the GJETC of the first phase 2016-18 as well as first results of the second phase. It also reviews the setup of the GJETC and the way it works, to assess if and how it can serve as a role model of bilateral cooperation on the energy transition.
Limits und Leitplanken : wie sich die Richtung des Wandels hin zum Weniger beeinflussen lässt
(2016)
The German contribution to limiting global warming to two degrees has to be - as in other developed countries, too - a reduction of 80 to 95 percent of CO2 emissions by 2050 compared to 1990. The project "Low Carbon City Wuppertal 2050" has analysed how such a drastic reduction of CO2 could be achieved on a municipal level in the transportation and residential sector by also working on the land use and material flows dimension. The focus of this paper lies on the space heating in the residential sector.
Wuppertal is a city with about 350,000 inhabitants in the West of Germany. According to the CO2 balance (2007) of the city that was adjusted to the year 2010, the emissions that were caused by space heating in the residential sector remained almost the same since 1990. They decreased slightly from 693,000 tons CO2 in 1990 to 691,000 tons in 2010, although final energy use for space heating increased by about 15 percent. But the shift of energy sources especially from coal to gas avoided an increase of emissions. However, the reduction target of 95 percent means that CO2 emissions have to be reduced to 35,000 tons per year until 2050.
A reference scenario shows that the city could achieve about 30 percent of the reduction required with the current trend of renewable energy development and energy efficiency measures such as retrofitting the building stock. But looking at the difficult financial conditions of the municipality as well as at the socio-economic situation of the inhabitants it becomes clear that the remaining 65 percent of the target to a 95 percent reduction will be difficult to reach and that innovative measures of energy efficiency and sufficiency1 need to be developed.
But which social-ecological effects does the implementation of comprehensive climate protection measures have on the inhabitants of a city? How do people live in a "Low Carbon City"? In this paper qualitative and quantitative scenarios will be developed since the combination of both is promising to show both effects: what share could renewable energies, energy efficiency and sufficiency measures have in reaching the target of 95 percent, and how could life look like in an almost CO2 free city in Germany in 2050.
Der Anteil erneuerbarer Energien bei der Wärme- (und Kälte-)Versorgung lag 2021 in Deutschland bei 16,5 % (knapp 200 TWh/a). Davon stammten 86 % aus Biomasse und davon wiederum 47% allein aus Holzfeuerungen im häuslichen Bereich. Der Rest der erneuerbaren Wärme stammte aus oberflächennaher Geothermie und Umgebungswärme (Wärmepumpen) mit 9 % und Solarthermie mit 4,2 %. Bisher vergleichsweise kleine Beiträge stammten aus der tiefen Geothermie. Im Jahr 2021 waren bezogen auf die rund 21 Millionen im Bestand befindlichen Einzelgebäudeheizanlagen (nicht Einzelraumfeuerstätten) 1,1 Mio. Wärmepumpen und 0,9 Mio. Biomassekessel im Betrieb. Hinzu kommen zusätzliche 2,5 Mio. solarthermische Anlagen mit einer Gesamtkollektorfläche von rund 21 Mio. m2. Bei den neu installierten Wärmeerzeugern konnten Wärmepumpen und Biomassekessel auch 2021 einen deutlich steigenden Absatz verzeichnen, wobei ihr Anteil an den insgesamt rund 930.000 neu installierten Wärmerzeugern bei knapp 25% lag.
Doch 2021 nutzten immer noch rund 19 Mio. Wärmeerzeuger Gas und Öl. Darüber hinaus müssen in Wohngebäuden auch noch Etagenheizungen und veraltete Biomasseheizsysteme ausgetauscht werden. Für eine erfolgreiche Wärmewende bis 2045 im Gebäudewärmebereich müssen also weiterhin jedes Jahr rund eine Million neue komplett Erneuerbare-Heizanlagen installiert und in Betrieb genommen werden. Nach dem Anschluss an zumindest perspektivisch vollständig erneuerbar versorgte Wärmenetze sind für alle anderen Objekte Wärmepumpen, Wärmepumpen-Biomasse-Hybride und, nur wo es keine anderen Möglichkeiten gibt, reine Biomassekessel zu installieren. Alle Lösungen lassen sich zusätzlich mit Solarthermieanlagen ergänzen. Im Vergleich zu Erdgasthermen ist jedoch allein die Installation der deutlich komplexeren Systeme mit mindestens dem doppelten Zeitaufwand zu veranschlagen, während die Branche bereits heute über einen realen Fachkräftemangel klagt. Es braucht also wirksame Lösungsansätze der Forschung zur Überwindung dieser und vieler anderer Hemmnisse zur erfolgreichen Wärmewende bis 2045.
The international governance landscape on climate change mitigation is increasingly complex across multiple governance levels. Climate change mitigation initiatives by non-state stakeholders can play an important role in governing global climate change and contribute to avoiding unmanageable climate change. It has been argued that the UNFCCC could and should play a stronger role in "orchestrating" the efforts of these initiatives within the wider climate regime complex and thus inspire new and enhanced climate action. In fact, the Lima-Paris Action Agenda supporting cooperative climate action among state and non-state actors was supposed to be a major outcome of COP21.
There is little doubt that successful mitigation initiatives can create a momentum for climate protection. What is missing, is a systematic analysis of how this momentum can feed back into the UNFCCC negotiation process, inspiring also enhanced and more ambitious climate mitigation by states in future iterations of the cycle of nationally determined contributions under the Paris Agreement. This paper aims to close this gap: building on a structurational regime model, the article [1] develops a theory of change of how and through which structuration channels non-state initiatives can contribute to changing the politics of international climate policy; [2] traces existing UNFCCC processes and the Paris Agreement with a view to identifying entry points for a more direct feedback from non-state initiatives; and [3] derives recommendations on how and under which agenda items positive experiences can resonate within the UNFCCC negotiation process.
A case study in the rural area of South Westphalia, Germany, showed the importance of independent intermediaries to support the development and implementation of sustainable energy and efficiency projects. The idea behind the project "Dorf ist Energie(klug)" (Village is Energy(smart)) was to foster, accompany, and support energy and efficiency projects in villages from the first idea to final implementation. Therefore, the South Westphalia Agency as independent intermediary initiated an application process in which villages could apply with their innovative energy and efficiency project ideas. During the following process the chosen "coaching villages" benefitted from the consultation of teams of thematic experts. Villages with less developed projects were supported through idea workshops with experts and study visits.
The accompanying scientific study evaluated the overall process focussing on the transferability, the sustainability and the quality of the process. Furthermore, a self evaluation tool for (energy) projects in villages was developed and tested in two of the participating coaching villages.
The paper gives a short insight into the project "Dorf ist Energie(klug)". It presents the methodology of the accompanying study and the results with a special focus on the role of the South Westphalia Agency as independent intermediary. Finally, it discusses the transferability and sustainability of the project.
Energy efficiency improvements have numerous benefits/impacts additional to energy and greenhouse gas savings, as has been shown and analysed e.g. in the 2014 IEA Report on "Multiple Benefits of Energy Efficiency". This paper presents the Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe"), aiming at calculating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. The project covers the most relevant technical energy efficiency improvement actions and estimates impacts of reduced air pollution (and its effects on human health, eco-systems/crops, buildings), improved social welfare (incl. disposable income, comfort, health, productivity), saved biotic and abiotic resources, and energy system, energy security, and the macroeconomy (employment, economic growth and public budget). This paper explains how the COMBI energy savings potential in the EU 2030 is being modelled and how multiple impacts are assessed. We outline main challenges with the quantification (choice of baseline scenario, additionality of savings and impacts, context dependency and distributional issues) as well as with the aggregation of impacts (e.g. interactions and overlaps) and how the project deals with them. As research is still ongoing, this paper only gives a first impression of the order of magnitude for additional multiple impacts of energy efficiency improvements may have in Europe, where this is available to date. The paper is intended to stimulate discussion and receive feedback from the academic community on quantification approaches followed by the project.
The general conditions for local authorities in Germany have changed fundamentally during the last decades. Not only do municipalities compete with each other for employment, prestige and competitive advantages, they also face increasingly higher demands by their citizens, for instance in the area of climate protection.
Therefore, every municipality has to consider various economic, social and ecological determinants in its decision-making processes. With respect to public buildings, an economically-oriented cost-benefit-analysis alone is not adequate due to a municipality's role as "consumer and role model". To identify measures with a broader benefit, a multicriteria analysis (MCA) has been used to analyze energy efficiency measures in public buildings for the city of Dortmund.
For several years Dortmund has committed itself to implement energy efficiency measures and improve the energy performance of its building stock. Nevertheless, a benchmark analysis still shows a high energy saving potential that cannot be tapped with the existing measures and instruments. Therefore, a package of measures has been developed in close cooperation with the city of Dortmund, ranging broadly from measures of energetic retrofitting and green IT to behavioral change of building occupants.
In the MCA these measures have been assessed according to ten different criteria such as innovativeness, cost effectiveness, external costs, CO2 reduction potential, local value or effort of implementation. Three different scenarios ("City as Role Model", "City as Homo Oeconomicus", "City as Climate Protector") show different municipal perspectives.
The analysis has shown that the greatest benefit for municipalities, regardless of the municipal perspective, is yielded by measures such as voluntarily enhanced minimum standards for new or for energetic retrofitting of public buildings, the procurement of energy-efficient office equipment, the expansion of heat generation from renewable energies and the usage of private capital in participatory projects like "Solar&Save".
In 2008, transport accounted for 27% of the world’s total final energy consumption. Currently, we are facing a rapidly expanding transport sector with continually increasing energy consumption. In the future, emerging and developing countries especially will experience an accelerated growth in transport energy demand due to rapid population growth, urbanisation and rising per capita income. The transport sector’s inefficiency and its dependency on oil will become an economic burden for these countries. They will have to face increasing crude oil prices and uncertainties regarding energy security.
Thus, there is a need for an efficient transport system and particularly for decision makers in developing and emerging countries to have access to planning advice in order to identify suitable and effective measures for low-energy urban transport. To meet this demand, existing knowledge and measures about energy efficiency in urban passenger transport was compiled and a structured introduction to energy efficiency in transport is provided.
The main determinates of an energy-efficient transport system are explained and strategic approaches to increase energy efficiency are outlined. Success factors and barriers for energy efficiency policies are described. The main element of the paper is an overview of different energy efficiency policies and measures for the key actors in energy-efficient transport on local and national levels. A set of measures is assigned to each actor identified. The compilation was adapted to the circumstances in developing and emerging countries and includes examples for successful implementation of several measures. Thus, the document satisfies the need for a comprehensive introduction to energy efficiency in urban transport in developing and emerging countries.
An important instrument to enhance the market uptake of energy-efficient new buildings and the energy-efficient renovation of existing buildings in the European Union (EU) are the Energy Performance Certificates (EPC). However, their implementation and use has varied between EU Member States. The European Commission has therefore provided funding to a number of Horizon2020 projects to develop next-generation EPC schemes.
One of these is the QualDeEPC project, aiming to both improve quality and cross-EU convergence of EPC schemes, and particularly the link between EPCs and deep renovation. The objective of the project is to improve the practical implementation of the assessment, issuance, design, and use of EPCs as well as their renovation recommendations, in the participating countries and beyond.
This paper presents the policy proposals and concepts for tools that the QualDeEPC project has developed as priorities for enhanced EPC schemes:
- Improving the recommendations for renovation, which are provided on the EPCs, towards deep energy renovation
- An online tool for comparing EPC recommendations to deep energy renovation recommendations
- Creating Deep Renovation Network Platforms (One-stop Shops plus networking and joint communication of supply-side actors)
- Regular mandatory EPC assessor training (on assessment and renovation recommendations) required for certification/accreditation and registry
- Achieving a high user-friendliness of the EPC
- Voluntary/mandatory advertising guidelines for EPCs
- Improving compliance with the mandatory use of EPCs in real estate advertisements
The paper will focus on the aspects related to improving the impact of EPCs for stimulating deep renovation. It will also present lessons learnt from the discussion with stakeholders at national and European workshops and from the testing of the proposals and tools in around 100 buildings, as well as from the first steps of their country-specific adaptation.
Consumption by private households in various areas of demand - housing, mobility, nutrition, services and products - contributes to around 10 % of total emissions in Germany. Of this, higher-income households are responsible for a disproportionate share. At the same time, many households often lack the knowledge, time, or motivation to deal with their own energy-relevant and climate-impacting behaviours. In this context, energy advice services play an important role for raising awareness, activating consumers and imparting knowledge about available options for action. However, conventional energy advice services are mostly limited to the topics of building and appliance energy efficiency - especially for middle- and high-income households - without considering private consumption behaviour and the related social practices as a whole. In practice, there has been little differentiation to date in addressing target groups in a way that takes into account different lifestyles and realities and the underlying values and motivations in a pluralistic society. The present paper presents a methodological approach to develop targeted energy advice approaches in urban environments that are oriented towards the motivations of different types of households with medium and high incomes. It proposes a three-step approach consisting of 1) a microdata-based population analysis to identify and categorize target subgroups, 2) an inventory of existing advice offers with regard to their coverage and approach and 3) a gap analysis based on the results of the preceding steps. Applied to a large city in Germany, the analysis finds that gaps are rarely found with regard to communicated facts but rather the way in which information is conveyed. Accordingly, recommendations relate to more effectively use windows of opportunity and framing of measures to match target group motivations.
The Chinese national government has put energy efficiency and pollution control at the heart of its 11th five-year plan (2005-2010). However, implementation of national policies at the local level is notoriously poor in China. In order to tackle this problem, voluntary agreements were signed between local Environmental Protection Bureaus and 14 mostly state-owned companies from different energy-intensive sectors in Nanjing, Xi'an and Kelamayi in the context of an ongoing EU-funded pilot project. In Nanjing, for instance, agreed targets are in the range of a 3-5% reduction in energy intensity by 2009 over a 2007 baseline. The pilot agreements are informed by Dutch experiences with long-term agreements on energy efficiency (LTA/1989-1999) as European best practice, but have been significantly adjusted to Chinese circumstances. Much emphasis was put on process management applying a cooperative approach throughout. Each enterprise put together a so-called Energy Action Team for voluntary agreement development and implementation. This helped to create a sense of ownership in the companies and assigned clear responsibilities. Energy Action Teams conducted Energy Potential Scans in cooperation with a Dutch expert to identify energy saving potentials and possible measures to realize them. On this basis, achievable targets were agreed and a detailed action plan was developed. A first evaluation is scheduled for April 2009. By lifting industry on a more equal power level with government authorities, voluntary agreements showed to be an effective policy instrument to overcome traditional institutional constraints to environmental policy implementation at the local level in China.
Increasing urbanisation and climate change belong to the greatest challenges of the 21st century. A high share of global greenhouse gas emissions are estimated to originate in urban areas (40 % to 78 % according to UN Habitat 2010). Therefore, low carbon city strategies and concepts implicate large greenhouse gas (GHG) mitigation potentials. At the same time, with high population and infrastructure densities as well as concentrated economic activities, cities are particularly vulnerable to the impacts of climate change and need to adapt. Scarce natural resources further constrain the leeway for long-term, sustainable urban development. The Low Carbon Future Cities (LCFC) project aims at tapping this three-dimensional challenge and will develop an integrated strategy / roadmap, balancing low carbon development, gains in resource efficiency and adaptation to climate change. The study focuses on two pilot regions - one in China (Wuxi) and one in Germany (Düsseldorf+) - and is conducted by a German-Chinese research team supported by the German Stiftung Mercator. The paper gives an overview of first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi. The project developed an emission inventory for Wuxi to identify key sectors for further analysis and low carbon scenarios. The future development of energy demand and related CO2 emissions in 2030 were simulated in the current policy scenario (CPS), using five different sub-models. Selected aspects of Wuxi's current material and water flows were analysed and modelled for energy transformation and the building sector. Current and future climate impacts and vulnerability were investigated. Recent climatic changes and resulting damages were analysed, expected changes in temperature and precipitation in the coming four decades were projected using ensembles of three General Circulation Models. Although Wuxi's government started a path to implement a low carbon plan, the first results show that more ambitious efforts are needed to overcome the challenges faced.
Many European city governments have voluntarily committed to ambitious CO2-emission reduction targets until 2020 and 2050. Supported by dedicated structures and networks (e.g. Covenant of Mayors), local governments have already developed, or are currently developing, ambitious climate action plans, all pursuing the aim of radical CO2-emission reduction in the long term.
Though, the development of climate action plans is only a first step, as the actual crucial and more challenging part its implementation. Besides financial investments also additional capacities, improved institutional structures and innovative strategies are necessary to successfully implement ambitious policies within existing national and regional framework conditions. There is often more competition than co-operation between cities. However, exchanging on common challenges in order to find new solutions provides potential for innovative ideas and new views on own structures. In particular, methods and formats for self-assessment and mutual learning can support cities' stakeholders to overcome their implementation gap in local energy and climate policies.
This paper will present results from the first phase of the three year project "CASCADE", which was initiated by 19 European cities in co-operation with EUROCITIES. Within the project, implementation challenges are being addressed in an intensive process of self-assessment and mutual learning. The methodological "backbone" of this process is a qualitative benchmarking framework in the thematic fields of "Renewable energy sources and distributed energy generation", "Energy efficient buildings and districts" and “Energy in urban transport”. Up to a certain degree, existing local climate policy benchmarks provide a common exchange platform, but mainly for the comparison between cities. The CASCADE benchmarking framework goes beyond competitive comparisons. As a qualitative criteria-based assessment procedure it identifies key challenges and factors for a successful implementation of established local climate policy plans. These factors have been developed from a qualitative survey including interviews and workshops with representatives of the participating cities.
Six cities serve as examples. Self-assessment reports were provided based on the CASCADE benchmarking framework focussing on the implementation status of their local climate policies. These reports were reevaluated by four or five project partners from different cities in a desk-review process. During subsequent four-days peer learning visits, the CASCADE benchmarking framework was used again as a tool for an in-depth assessment of the local climate and energy action plans and the local activities towards implementation of these strategic documents. Finally, the visitors drafted a feedback report with recommendations and improvements for the hosts.
The paper describes the methodology of the CASCADE benchmarking framework for integrated learning, its applicability for peer learning processes, as well as first experiences and results from the peer learning visits.
The core objective of Energy Efficiency Watch 3 (EEW3) is to establish a constant feedback loop on the implementation of European and national energy efficiency policies and thus enable both compliance monitoring and mutual learning on effective policy making across the EU. The project team applied a mixed-method approach to assess energy efficiency policy developments in EU Member States. It analysed progress of national policies by screening official documents, sought experts' knowledge via an EU-wide survey and has been creating new consultation platforms with a wide spectrum of stakeholders including parliamentarians, regions, cities and business stakeholders. Analysis of the National Energy Efficiency Action Plans (NEEAPs), the expert survey with input from over 1,100 experts on policy ambition and progress in each Member State, as well as 28 Country Reports have been central elements in EEW3. This paper will present the main conclusions and policy recommendations of EEW3. In doing so, it will first summarise the findings of the document analysis based on the 28 Country Reports, showing developments of energy efficiency policies since the second NEEAP in 2011 in a cross-country overview for six sectors. These findings are then contrasted with the experts' perspective on progress in energy efficiency policies in their countries as collected in the EEW survey. Moreover, ten case studies of good practice energy efficiency policies are shown, three of them will be presented in more detail. The paper ends with key policy conclusions for improving the effectiveness of European energy efficiency policies. A key finding is that policy implementation has improved a lot since 2011 but more is needed to achieve the EED Art. 7 and other targets.
Neuerdings ist es wieder "hoffähig" geworden, von Suffizienz zu sprechen. Das ist auch gut so, denn die gewünschte Energiewende schreitet mit Sicherheit schneller und zielstrebiger voran, wenn Suffizienz-, Effizienz- und Konsistenzstrategien zusammenwirken. Neben den notwendigen technischen Veränderungen ist aber auch eine sozial-kulturelle Transformation erforderlich.
Michael Kopatz beschreibt den Weg zur Suffizienz anhand eines Wohnflächen-Moratoriums.
Small-scale residential biomass combustion for space heating and warm water production already holds a considerable share on overall energy production from biomass in Europe. In the existing regulative framework of EU air quality and climate protection targets, an extended usage of renewable biomass heating without an increase of harmful emissions is urgently needed. In this context, the FP7 project "EU-UltraLowDust" (ULD) aimed at the demonstration of highly efficient and ultra-low emission small-scale biomass combustion technologies and the development of supporting policy recommendations.
New combustion technology operating at almost zero particulate matter (PM) emissions has been demonstrated, rivalling even the performance of state-of-the-art natural gas fuelled systems. In this context, the authors analysed EU policy options for a faster diffusion of these new innovative technologies. The analysis presented in this paper is based on results from an original impact assessment with special focus on energy efficiency and emission scenarios, including the potential effects of a broad deployment of the new ULD technologies as well as the early replacement of poor performing existing installations.
As the derived results show that major shares of energy consumption and emissions from residential biomass combustion in the EU are caused by old heating systems, specific policy measures for new and existing installations have been analysed. Following this, a recommended and harmonized policy package for new Small Combustion Installations (SCI) to be put on the market as well as for existing SCI in the stock has been developed, which will be presented in this paper. The basic policy package addresses new installations and consists of a two-step approach, aiming at enhancing the current and forthcoming policies addressing the SCI market in Europe. A complementary second policy package for existing installations aims specifically at the early replacement of SCI already installed in the stock, which are characterized by low efficiency and high emissions.
The role of cities in mitigating GHG emissions and thus tackling global warming has gained importance over the last years.Many cities have developed climate action plans, primarily to achieve long-term "low-carbon" mitigation goals set by national governments or (inter)national agreements. A mere adoption of high level targets, however, raises the question whether these targets are applicable for cities with very different framework conditions.
We argue that it is crucial to understand the socio-economic, geophysical, spatial, infrastructural and political framework of a city - a broad approach, which is generally missing in climate action plans. Thus, determining drivers and barriers for future development paths is neglected by local policies, which leads to a gap between ambition (target) and reality (implementation).
We exemplarily examine this hypothesis for the shrinking city of Oberhausen (Germany). Oberhausen, located in the Ruhr area,is a typical old industrial region, which has seen a decline of its industrial basis over the last decades. We analysed historical data and developed scenarios until 2030. Both show a significant decrease in CO2 emissions. A closer look, however, reveals that the reduction is primarily due to the economic transformation (less manufacturing, more service industry, accompanied by a decrease in population) and general energy efficiency developments following the implementation of national and EU policies. Although the city has implemented–and will further implement - many instruments and policies to reduce CO2 emissions, local barriers such as unemployment, low rents, low income, high per capita debts, etc. dramatically reduce the city's capacity for action.
The results show that Oberhausen's emission reductions do not reflect active energy policies but are mainly driven by an economic decline. To reach ambitious reduction targets, however, the city needs to be enabled to take action in achieving appropriate and reasonable targets.