Refine
Year of Publication
- 2012 (119) (remove)
Document Type
- Report (32)
- Peer-Reviewed Article (30)
- Conference Object (22)
- Part of a Book (15)
- Working Paper (12)
- Contribution to Periodical (4)
- Master Thesis (2)
- Doctoral Thesis (1)
- Periodical Part (1)
Language
- English (119) (remove)
Concerns over climate change and the security of industrial feedstock supplies have been opening a growing market for biobased materials. This development, however, also presents a challenge to scientists, policy makers, and industry because the production of biobased materials requires land and is typically associated with adverse environmental effects. This article addresses the environmental impacts of biobased materials in a meta-analysis of 44 life cycle assessment (LCA) studies. The reviewed literature suggests that one metric ton (t) of biobased materials saves, relative to conventional materials, 55 ± 34 gigajoules of primary energy and 3 ± 1 t carbon dioxide equivalents of greenhouse gases. However, biobased materials may increase eutrophication by 5 ± 7 kilograms (kg) phosphate equivalents/t and stratospheric ozone depletion by 1.9 ± 1.8 kg nitrous oxide equivalents/t. Our findings are inconclusive with regard to acidification (savings of 2 ± 20 kg sulfur dioxide equivalents/t) and photochemical ozone formation (savings of 0.3 ± 2.4 kg ethene equivalents/t). The variability in the results of life cycle assessment studies highlights the difficulties in drawing general conclusions. Still, common to most biobased materials are impacts caused by the application of fertilizers and pesticides during industrial biomass cultivation. Additional land use impacts, such as the potential loss of biodiversity, soil carbon depletion, soil erosion, deforestation, as well as greenhouse gas emissions from indirect land use change are not quantified in this review. Clearly these impacts should be considered when evaluating the environmental performance of biobased materials.
The cement industry is one of the major energy consuming and CO2 emitting sectors in China. In 2010, 1,868 million tons of cement has been produced, which accounted for 56.1% of the world's total cement production. The 11th Five-Year Plan (FYP) (2006-2010) included policy measures for CO2 emission abatement in cement production. Based on the main governmental framework of CO2 mitigation policies at national level in the cement sector, key policies and technologies used during this period are identified and their effects on CO2 reduction are assessed. This paper calculates the reduction of CO2 emissions related to four main policies and technologies for efficient cement production in the 11th and the 12th FYP (2011-2015) with 2005 as a reference year. These are waste heat recovery, closing outdated facilities, substitution for clinker production and other technologies aiming to increase energy efficiency. Due to these measures, we estimate that a total CO2 emission reduction during the 11th FYP of 397 million tonnes could be saved, which is considerably different to 185.75 million tonnes estimated by Zeng (2008) and 303 million tonnes by the NDRC by using different calculation methods. Of the four technologies, the 4th group of energy efficiency increasing techniques was the most important policy and avoided the largest amount of CO2 emissions. Previous energy intensity reduction was mainly due to the outdated production closing and energy efficiency improving. Based on the assessment of technology performance, it appears that there is still a large emission reduction potential in cement production processes. The paper calculates this potential for the 12th FYP period (2011-2015) based on these four identified policy measures. The result is compared to the Chinese government targets in the 12th FYP and promising future CO2 mitigation policies and technologies are proposed, such as the use of alternative energy.
The multi-level perspective has successfully been applied to the analysis of complex sector transitions in the energy, the health or the food production sector. Is this framework also helpful to understand and give prescriptive advice for sustainability transformations within a national science system? Based on a comprehensive study of the diffusion of transdisciplinary sustainability research in Germany, this article analyzes the institutional dimension of a changing science-society relation in the German science system. It uses the multi-level perspective as a fruitful heuristic in order to identify potential pathways for a broader diffusion of transdisciplinary sustainability science. The importance of niche coalitions of frontrunner universities and research institutes are highlighted.
The article estimates the natural resource consumption due to nutrition from the supply and demand sides. Using the MIPS (Material Input per Service Unit) methodology, we analyzed the use of natural resources along the supply chains of three Italian foodstuffs: wheat, rice and orange-based products. These figures were then applied for evaluating the sustainability of diets in 13 European countries. The results outline which phases in food production are more natural resource demanding than others. We also observed different levels of sustainability in the European diets and the effect of different foodstuffs in the materials, water and air consumption.
Consumption of natural resources should not exceed sustainable levels. The increasing use of biofuels and to some extent biomaterials, on top of rising food and feed demands, is causing countries to use a growing amount of global land, which may lead to land use conflicts and the expansion of cropland and intensive cultivation at the expense of natural ecosystems. Selective product certification cannot control the land use change triggered by growing overall biomass consumption. We propose a comprehensive approach to account for the global land use of countries for their domestic consumption, and assess this level with regard to globally acceptable levels of resource use, based on the concept of safe operating space. It is shown that the European Union currently uses one-third more cropland than globally available on a per capita basis and that with constant consumption levels it would exceed its fair share of acceptable resource use in 2030. As the use of global forests to meet renewable energy targets is becoming a concern, an approach to account for sustainable levels of timber flows is also proposed, based on the use of net annual increment, exemplified with preliminary data for Switzerland. Altogether, our approach would integrate the concept of sustainable consumption into national resource management plans; offering a conceptual basis and concrete reference values for informed policy making and urging countries to monitor and adjust their levels of resource consumption in a comprehensive way, respectful of the limits of sustainable supply.
Cities as "real world laboratories" for system innovations : theories, models and empirical designs
(2012)
City-wide programmes of activities : an option for significant emission reductions in cities?
(2012)
The exploitation of coltan in Central Africa can be considered a case of conflict minerals due to its nature. Many international organizations and bodies, national governments and private sector organizations seek to address this conflict, in particular via transparency, certification and accountability along the material supply chain. This paper analyses the international trade dimension of coltan and gives evidence on the dimension of illicit trade of coltan. The authors start from the hypothesis that illicit trade of coltan sooner or later will enter the market and will be reflected in the statistics. The paper is structured in the following manner: first, a short section gives a profile of coltan production and markets; second, an overview of the mining situation in the Democratic Republic of Congo (DRC) and related actors. The third section addresses mechanisms, actors and measurement issues involved in the international trade of coltan. The final part draws lessons for certification and conflict analysis and offers some guidance for future research.
The paper identifies two main possible gateways to trace illegal trade in coltan: the neighboring countries, especially Rwanda, and the importing countries for downstream production, in particular China. Our estimation is that the value of such illicit trade comes close to $ 27 million annually (2009), roughly one-fifth of the world market volume for tantalum production. With regard to any certification the paper concludes that this will become challenging for business and policy: (a) Central Africa currently is the largest supplier of coltan on the world market, many actors profit from the current situation and possess abilities to hide responsibility; (b) China will need to accept more responsibility, a first step would be the acceptance of the OECD guidelines on due diligence; (c) better regional governance in Central Africa comprises of resource taxation, a resource fund and fiscal coordination. An international task force may provide more robust data, however more research will also be needed.
This paper addresses future perspectives for the management of resources on an international level. Failures of international open markets result in significant material leakage. Here, taking the example of material used vehicles, we develop elements of an international metal covenant that should allow for a more sustainable management of global material flows in that area. Our proposal is based on two principles: any regulation should actively seek industry participation, taking advantage of business interest in supplying a sufficient quantity of materials while lowering materials costs; and it should also address public issues such as sustainability of recycling and waste. In this paper we first analyse contracts as a tool for bridging gaps in knowledge when multiple actors are involved. We then give empirical evidence for material leakage in the case of used vehicles from Germany, before outlining the elements of a proposed international metals covenant. Finally, we analyse potential impacts and discuss legal and institutional issues.
Shifting the resource base for chemical and energy production from fossil feedstocks to renewable raw materials is seen by many as one of the key strategies towards sustainable development. The utilization of biomass for the production of fuels and materials has been proposed as an alternative to the petroleum-based industry. Current research and policy initiatives focus mainly on the utilization of lignocellulose biomass, originating from agriculture and forestry, as second generation feedstocks for the production of biofuels and electricity. These activities act on the assumption that significant amounts of biomass for non-food purposes are available. However, given a certain productivity per area, the current massive growth in global biofuels demand may in the long term only be met through an expansion of global arable land at the expense of natural ecosystems and in direct competition with the food-sector. Although many studies have shown the potential of biofuels production to reduce both, greenhouse gas emissions and non-renewable energy consumption, these production routes are still linear processes which depend on significant amounts of agricultural or forestry production area. Cascading use, i.e. when biomass is used for material products first and the energy content is recovered at end-of-life, may provide a greater environmental benefit than primary use as fuel. Considering waste and production residues as alternative feedstocks could help to further reduce pressures on global arable land. This research focused on thermochemical and biochemical technologies capable of utilizing organic waste or forestry residuals for energy, chemical feedstock, and synthetic materials (polymers) generation. Routes towards synthetic materials allow a closer cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. The system-wide environmental burdens of three different technologies, including (1) municipal solid waste (MSW) gasification followed by Fischer-Tropsch synthesis (FTS), (2) plasma gasification of construction and demolition (C&D) wood for syngas production with energy recovery, and (3) forest residuals use in a biorefinery for polyitaconic acid (PIA) production, were assessed using life-cycle assessment. The first two studies indicated that MSW gasification and subsequent ethylene and polyethylene production via FTS has lower environmental impacts than conventional landfilling. In the future, as societies may shift towards the use of renewable energy, power offset by conventional waste-to-energy systems would not be as significant and chemicals production routes may then become increasingly competitive (in terms of environmental burdens) also to waste incineration. While production cost of Fischer-Tropsch derived chemicals seems not yet competitive to fossil-based chemicals provision, future price increases in global oil prices as well as changes in waste tipping fees, and efficiency gains on site of the waste conversion systems, may alter the economics and allow carbon recycling routes to reach a price competitive to fossil-based production routes. The third study found that plasma gasification of C&D wood for energy recovery has roughly similar environmental impacts than conventional fossil-based power systems. However, process optimization with respect to coal co-gasified, coke used as gasifier bed material, and fuel oil co-combusted in the steam boiler, would allow to significantly lower the system-wide environmental burdens. The fourth study looked at PIA production from softwood hemicellulose in a stream integrated approach (with the partially macerated wood and lignin being used in other existing processes such as pulp & paper plants for conventional pulp and bioenergy production). The assessment indicated lower global warming potential, energy demand, and acidification, for the wood-based PIA polymer, when compared to corn-based PIA and fossil-based polyacrylic acid (PAA). However, water use associated with wood-derived PIA was found to be higher than for fossil-based PAA production and land occupation is highest for the wood-derived polymer. It is hoped that results of this dissertation will add to the current debate on sustainable waste and biomass utilization and to establish future supply chains for green and sustainable chemical products.
Conflict minerals
(2012)
This paper presents the evaluation of a regional energy efficiency programme implemented in two "départements" of France. Électricité de France (EDF), a French energy company, provides refurbishment advice and financial incentives to end-users in the residential sector as well as specific training courses and certification to local installation contractors and building firms. Refurbishment measures analysed in this paper are efficient space heating equipment (condensing boilers, heat pumps and wood stoves or boilers), solar water heating systems and the installation of double-glazed windows. A billing analysis based on a survey of programme participants' energy consumption is used to calculate the energy savings attributed to the programme. In order to receive an economic feedback of this demonstration programme, the evaluation of both saved energy and programme costs is of importance. Detailed knowledge of the programme's cost-effectiveness is essential for EDF to achieve the saving obligations imposed by the French White Certificate scheme at the lowest cost. Results of this evaluation can support the development and implementation of further energy efficiency programmes with similar characteristics in other regions of France. The cost-effectiveness is determined from the perspective of the programme participant and the society as well as the energy company in charge of the programme. All cost and benefit components are calculated in Euro per kilowatt-hour, which allows a direct comparison of levelized costs of conserved energy with the avoidable costs of the energy supply system.
Material flows induced by national economies can be regarded as indirect pressure indicators for environmental degradation. Economy-wide material flow analysis and indicators have been designed to monitor material and energy flows at the macroeconomic level and to provide indicators, which could contribute to management of resourceuse and output emission flows from both economic, environmental and broader sustainability points of view. These indicators can serve various purposes including monitoring the material basis of national economies and related environmental pressures, assessment of the material and resource productivity and monitoring the implications of trade and globalisation.
The main part of this paper compares the material and resourceuse of the Czech Republic, Germany and the EU-15 by means of DMI and TMR indicators over the period of 1991–2004 (1991–2000 for EU-15). At the aggregate level both indicators in all three economies do not show any clear decreasing or increasing trends over the period considered. This means that environmental pressure related to use of materials for production and consumption purposes remains rather stable. All the economies however, recorded an increase in the efficiency of transforming the material/resource inputs into economic output. The analysis further revealed that most of the dynamics of DMI and TMR in the Czech Republic tended towards a higher similarity with Germany and the EU-15. In the future, further decreases in DMI as well as in TMR of fossils fuels might be expected in the Czech Republic, which could be counteracted by increase in DMI and TMR of metal ores/metal resources and non-metallic minerals/non-metallic resources. The future development of total DMI, TMR and material/resource intensity in both the Czech Republic and Germany will depend on further shifts to less material intensive industries and services and on increasing material efficiency in production and consumption of particular products. This is not only a technological, but also a social challenge, as there are barriers in current mode of governance and in shaping of current economic and social systems to do so.
Energy efficiency services : good practice business models and successful market developments
(2012)
The energy potential of agricultural residues in Tanzania has so far not been evaluated and quantified sufficiently. Moreover, the scientific basis for estimations of the sustainable potential of wastes and residues is still very limited. This paper presents an attempt to evaluate the theoretical and technical potential of residues from the sisal sector in Tanzania with regards to energy recovery through anaerobic digestion. The characteristics and availability of sisal residues are defined and a set of sustainability indicators with particular focus on environmental and socio-economic criteria is applied. Our analysis shows that electricity generation with sisal residues can be sustainable and have positive effects on the sustainability of sisal production itself. All sisal residues combined have an annual maximum electricity potential of 102 GW h in 2009, corresponding to up to 18.6 MW of potential electric capacity installations. This estimated maximum potential is equivalent to about 3 % of the country's current power production. Utilizing these residues could contribute to meeting the growing electricity demand and offers an opportunity for decentralized electricity production in Tanzania.
This chapter is an excerpt from a study commissioned by the European Parliament, which examines EU subsidies for agriculture, fisheries, transport, energy and regional development. Based on proven methodologies for the identification and assessment of environmentally harmful subsidies, the study assesses the sustainability level of the sectoral policies and makes recommendations for a reform that would contribute to the alignment of the EU budget towards a more sustainable growth. The following sections provide the main findings of one of the largest fields of expenditure within the EU budget, the structural and cohesion policy.
Transportation is one of the most pressing and least tackled problems for environmental protection and global warming, also in Germany, which is known for its car industry and highways. This thesis analyzes federal legal, fiscal and "soft" measures (such as awareness campaigns) for sustainability in the land transport sector in Germany. It shows the fixation on expensive technical programs such as electric mobility and infrastructure expansion to solve sustainability issues mobility behavior is not attempted to change. Instead of focusing on a traffic avoidance and modal shift, the federal government tries to solve emission problems only by improving engines and technology. The study compares goals and achievements of German politics and political packaging for sustainable transportation and shows that a massive transition in the transport sector is necessary to ensure affordable, socially just and environmentally friendly mobility for everyone.
The paper analyzes a Bolivian region for possible cultivation of the oil plant Jatropha curcas for sustainable biodiesel production in order to replace in part Bolivia's diesel imports. The specific site for this study is located in the dry region of Gran Chaco in Santa Cruz. The aim of this work is to analyse the potential of useable land and resources for sustainable biodiesel production from Jatropha without competition with edibles production using economic, environmental and social criteria. In addition the article introduces Jatropha as one of the preferred oil plants for biodiesel production in several countries and indicates its different uses. The recommendation to cultivate Jatropha for biodiesel production is based on an exploration of the possibility of land use in the selected region and the benefits Jatropha production could offer. In this manner a sustainable cultivation of Jatropha in the region of Gran Chaco is recommended to produce biodiesel and to improve some of the environmental problems facing the region.
Fragmentation or standardisation? : Offset use in Australia, California, Japan and South Korea
(2012)
How are neighbours doing? : Making energy efficiency efforts comparable through NEEAP screening
(2012)
How much is 100 billion US dollars? : Climate finance between adequacy and creative accounting
(2012)
The Energy End-use Efficiency and Energy Services Directive (ESD) of the European Union requires the member states to define and attain an overall target of at least 9 % annual energy savings between 2008 and 2016. Even if this target is indicative, this is the first international framework mandating countries to report on their energy savings results and prove achievement of their targets. The directive thus also required the development of harmonised calculation methods that can be used by member states for this proof and reporting. Existing literature covers most of the usual issues related to energy savings evaluation, but mostly looking at single, given energy efficiency programmes or policies. The evaluation objective for the ESD implementation is different, as it aims at accounting for the whole energy savings achieved in a country. Moreover, one of the main difficulties is the diversity in history and experience on this topic among the member states. In this context, the European project EMEEES has worked out an integrated system of bottom-up and top-down methods for the measurement of energy savings. The paper presents the overview of its final results. The proposals, inter alia, include 20 bottom-up and 14 top-down case applications of general evaluation methods. They enable more than 90 % of the potential energy savings to be measured and reported. They were used as a starting point by the European Commission to develop the methods recently recommended to the member states. Furthermore, the paper briefly discusses the importance of the quantity to be measured-all or additional energy savings - and the effect of measures implemented before the entering into force of the ESD ("early action"), and what this meant for the methods to be developed. It compares the main elements of calculation needed to ensure consistent results between bottom-up and top-down methods at the overall national level. Finally, general conclusions are drawn about what could be the next steps in developing an evaluation system that enables a high degree of comparability of results between different countries.
Increasing resource efficiency can potentially deliver important economic and environmental benefits. Many of these benefits are regularly foregone because the financial sector's capacity to adequately take the opportunities and risks arising from resource utilization and related climate change aspects into account has so far remained relatively undeveloped. Focusing on the case of Germany, a number of barriers to the inclusion of resource efficiency and climate change aspects into financial services' considerations are presented. Corresponding measures for improving the capacity of the financial sector to better integrate resource efficiency considerations and climate change related risks into its operating procedures are introduced. The measures encompass the areas of risk controlling, company reporting, institutional reporting requirements, as well as additional supporting measures.