Refine
Year of Publication
- 2010 (140) (remove)
Document Type
- Peer-Reviewed Article (33)
- Report (31)
- Conference Object (26)
- Working Paper (22)
- Part of a Book (14)
- Contribution to Periodical (9)
- Doctoral Thesis (3)
- Book (2)
Language
- English (140) (remove)
This article addresses informational barriers to energy efficiency. It is a widely acknowledged result that an energy efficiency gap exists implying that the level of energy efficiency is at an inefficiently low level. Several barriers to energy efficiency create this gap and the presence of asymmetric information is likely to be one such barrier. The article finds that problems of moral hazard and adverse selection indeed can help explain the seemingly low levels of energy efficiency. The theory reveals two implications to policies on energy efficiency. First, the development of measures to enable contractual parties to base remuneration on energy performance must be enhanced, and second, the information on technologies and the education of consumers and installers on energy efficiency must be increased. Finally, it is found that the preferred EU policy instrument on energy efficiency, so far, seems to be the use of minimum requirements. Less used in EU legislation is the use of measuring and verification as well as the use of certifications. Therefore, it is concluded that the EU should consider an increased use of these instruments.
Cleaning up the CDM
(2010)
REDD crediting vs. REDD funds : how avoided deforestation under the UNFCCC should be financed
(2010)
Biogas and bio-methane that are based on energy crops are renewable energy carriers and therefore potentially contribute to climate protection. However, significant greenhouse gas (GHG) emissions resulting from agricultural production processes must be considered. Among those, the production and use of fertilizer, and the resulting leaching of nitrous oxide (N2O), are crucial factors. This article provides an integrated life cycle assessment (LCA) of biogas (i.e. bio-methane that has been upgraded and injected into the natural gas grid), taking into account the processes of fermentation, upgrading and injection to the grid for two different types of biogas plants. The analysis is based on different feedstocks from crop rotation systems for different locations in Germany. A special focus is on the sensitivity of assumptions of nitrous oxide emissions to overall GHG emissions. Much research exists on the measurement or modeling of the actual N2O emissions that result from farming processes. Since there is as yet no precise regional data, most analyses use tier-1 data from the IPCC national GHG inventories as a default. The present article coincides with recent research in indicating that this data varies at the regional level. However, it is not the scope of the article to evaluate the quality of existing data for N2O emissions, but to show the effects of different assumptions on the LCA of GHGs from bio-methane. Thus, a link between the provision of emission data and the practical implementation of biogas technology is provided. The main result is that the supply chain of substrates from agricultural processes appears to contribute the most to the GHG emissions of bio-methane. The "worst case" scenario where 5% of the nitrogen fertilizer used is emitted in form of N2O shows that the GHG mitigation potential of bio-methane versus natural gas is very small, so there is not much margin for error in the plant technology.
This paper undertakes a step to explaining the international economics of resource productivity. It argues that natural resources are back on the agenda for four reasons: the demand on world markets continues to increase, the environmental constraints to using resources are relevant throughout their whole life cycle, the access to critical metals could become a barrier to the low carbon economy, and uneven patterns of use will probably become a source of resource conflicts. Thus, the issue is also of relevance for the transition to a low carbon economy. "Material Flow Analysis" is introduced as a tool to measure the use of natural resources within economies and internationally; such measurement methodology now is being harmonized under OECD auspices. For these reasons, the paper argues that resource productivity - that is the efficiency of using natural resources to produce goods and services in the economy - will become one of the key determinants of economic success and human well-being. An empirical chapter gives evidence on time series of resource productivity increases across a number of economies. Introducing the notion of "material flow innovation", the paper also discusses the innovation dynamics and issues of competitiveness. However, as the paper concludes, market barriers make a case for effective resource policies that should provide incentives for knowledge generation and get the prices right.
This paper reviews the current EU policy framework in view of its impact on hydrogen and fuel cell development. It screens EU energy policies, EU regulatory policies and EU spending policies. Key questions addressed are as follows: to what extent is the current policy framework conducive to hydrogen and fuel cell development? What barriers and inconsistencies can be identified? How can policies potentially promote hydrogen and fuel cells in Europe, taking into account the complex evolution of such a potentially disruptive technology? How should the EU policy framework be reformed in view of a strengthened and more coherent approach towards full deployment, taking into account recent technology-support activities? This paper concludes that the current EU policy framework does not hinder hydrogen development. Yet it does not constitute a strong push factor either. EU energy policies have the strongest impact on hydrogen and fuel cell development even though their potential is still underexploited. Regulatory policies have a weak but positive impact on hydrogen. EU spending policies show some inconsistencies. However, the large-scale market development of hydrogen and fuel cells will require a new policy approach which comprises technology-specific support as well as a supportive policy framework with a special regional dimension.
The papers for this special issue were originally contributed to the 2nd International Wuppertal Colloquium on "Sustainable Growth, Resource Productivity and Sustainable Industrial Policy - Recent Findings, new Approaches for Strategies and Policies" that was held from 10 to 12 September 2009 in Wuppertal, Germany. The intensive discussion during the Colloqium and the subsequent rigorous review process have helped to facilitate this process - we wish to thank all participants and contributers, as well as Sevan Hambarsoomian and Deniz Erdem for administrative support.
This study provides insight into the feasibility of a CO2 trunkline from the Netherlands to the Utsira formation in the Norwegian part of the North Sea, which is a large geological storage reservoir for CO2. The feasibility is investigated in competition with CO2 storage in onshore and near-offshore sinks in the Netherlands. Least-cost modelling with a MARKAL model in combination with ArcGIS was used to assess the cost-effectiveness of the trunkline as part of aDutch greenhouse gas emission reduction strategy for the Dutch electricity sector and CO2 intensive industry. The results show that under the condition that a CO2 permit price increases from €25 per tCO2 in 2010 to €60 per tCO2 in 2030, and remains at this level up to 2050, CO2 emissions in the Netherlands could reduce with 67% in 2050 compared to 1990, and investment in the Utsira trunkline may be cost-effective from 2020–2030 provided that Belgian and German CO2 is transported and stored via the Netherlands as well. In this case, by 2050 more than 2.1 GtCO2 would have been transported from the Netherlands to the Utsira formation. However, if the Utsira trunkline is not used for transportation of CO2 from Belgium and Germany, it may become cost-effective 10 years later, and less than 1.3 GtCO2 from the Netherlands would have been stored in the Utsiraformation by 2050. On the short term, CO2 storage in Dutch fields appears more cost-effective than in the Utsira formation, but as yet there are major uncertainties related to the timing and effective exploitation of the Dutch offshore storage opportunities.
Development of scientific and technical foundations for a national waste prevention programme
(2010)
In a new waste hierarchy the amended EU Waste Framework Directive (WFD) (2008/98/EG) confirmed the prevention of waste as a priority measure to protect the environment with regard to the production and handling of waste. Amongst others the Member States are requested to promote waste prevention. According to article 29 par. 1 WFD the prevention measures have to be planned in terms of waste prevention programmes to be created by the Member States until December 12th 2013. These prevention programmes are to describe existing waste prevention measures and set waste prevention goals. The progress is to be monitored and assessed by targeting appropriate, specific qualitative or quantitative benchmarks for adopted waste prevention measures. The programmes may be included in waste management plans or other environmental programmes. By the objectives and measures of prevention programmes the environmental impacts associated with generation of waste shall be decoupled from economic growth.
Securing universal access to electricity by using renewable energy sources is technically feasible. A broad range of technological options, which can meet almost any requirements, are available. Solutions can comprise the connection of users to large distribution networks (on-grid solutions) or the application of power supply systems that can operate autonomously (off-grid and mini-grid solutions). This brochure concentrates on the latter solutions; technologies for large-scale distribution are not covered.
The physical dimension of international trade. Part 1: Direct global flows between 1962 and 2005
(2010)
The physical dimension of international trade is attaining increased importance. This article describes a method to calculate complete physical trade flows for all countries which report their trade to the UN. The method is based on the UN Comtrade database and it was used to calculate world-wide physical trade flows for all reporting countries in nine selected years between 1962 and 2005. The results show increasing global trade with global direct material trade flows reaching about 10 billion tonnes in 2005, corresponding to a physical trade volume of about 20 billion tonnes (adding both total imports and total exports). The share from European countries is declining, mainly in favour of Asian countries. The dominant traded commodity in physical units was fossil fuels, mainly oil. Physical trade balances were used to identify the dominant resource suppliers and demanders. Australia was the principal resource supplier over the period with a diverse material export structure. It was followed by mainly oil-exporting countries with varying volumes. As regards to regions, Latin America, south-east Asian islands and central Asia were big resource exporters, mostly with increasing absolute amounts of net exports. The largest net importers were Japan, the United States and single European countries. Emerging countries like the "Asian Tigers" with major industrial productive sectors are growing net importers, some of them to an even higher degree than European countries. Altogether, with the major exception of Australia and Canada, industrialized countries are net importers and developing countries and transition countries are net exporters, but there are important differences within these groups.
Standardised baselines for urban passenger transport : no quick solution for fostering model shift
(2010)
Taking public transport by bus in the Chinese Metropolis Hefei as an example, the report analyses the practicability of standardised baselines as possible instruments for climate protection funding. The development of standardised baselines for the transport sector has been pushed since the nineties in order to better assess emission reductions of CDM projects. Further aims of standardising are a clinical comparison and a precise forecasting. For all projects of a defined sector, class, size or a given geographical origin it is possible to develop standardised baselines in the sense of reference value for emissions. The report was produced in the context of the initiative "Partnership on Sustainable Low Carbon Transport" (SLoCaT), commissioned by the Asian Development Bank. It complements the study "Applicability of Post 2012 Climate Instruments to the Transport Sector (SITS)", that analyses the impacts of climate protection funding mechanisms like the Clean Development Mechanism (CDM) in the transport sector of metropolises in emerging nations and gives recommendations for the further development of financing mechanisms.
The optimization of value chains is an important process to promote sustainable development, since value chains are closely linked to the satisfaction of human needs and combine different driving forces for environmental change. This article presents a methodological approach for the participatory development of value-chain wide sustainability indicator sets and their integration into a decision support tool in the specific case study of the chain "construction and refurbishment with wood". There are numerous indicator sets for sustainable development of forests and sustainable forestry available at different levels, ranging from local, regional and national to global scale assessments. Some efforts were also made to integrate later production stages of forest value chains (such as wood processing) in the assessment scope (e.g. for chain-of-custody certification). However, no indicator set has so far been available covering environmental, social and economic aspects for the entire value chain of building with timber. This gap was closed through applied sustainability research in the project "Holzwende 2020: Sustainable future markets for wood in the building sector".
Comparative analysis of environmental impacts of maize-biogas and photovoltaics on a land use basis
(2010)
This study aims to stimulate the discussion on how to optimize a sustainable energy mix from an environmental perspective and how to apply existing renewable energy sources in the most efficient way. Ground-mounted photovoltaics (PV) and the maize-biogas-electricity route are compared with regard to their potential to mitigate environmental pressure, assuming that a given agricultural area is available for energy production. Existing life cycle assessment (LCA) studies are taken as abasis to analyse environmental impacts of those technologies in relation to conventional technology for power and heat generation. The life-cycle-wide mitigation potential per area used is calculated for the impact categories non-renewable energy input, green house gas (GHG) emissions, acidification and eutrophication. The environmental performance of each system depends on the scenario that is assumed for end energy use (electricity and heat supply have been contemplated). In all scenarios under consideration, PV turns out to be superior to biogas in almost all studied impact categories. Even when maize is used for electricity production in connection with very efficient heat usage, and reduced PV performance is assumed to account for intermittence, PV can still mitigate about four times the amount of green house gas emissions and non-renewable energy input compared to maize-biogas. Soil erosion, which can be entirely avoided with PV, exceeds soil renewal rates roughly 20-fold on maize fields. Regarding the overall Eco-indicator 99 (H) score under most favourable assumptions for the maize–biogas route, PV has still a more than 100% higher potential to mitigate environmental burden. At present, the key advantages of biogas are its price and its availability without intermittence. In the long run, and with respect to more efficient land use, biogas might preferably be produced from organic waste or manure, whereas PV should be integrated into buildings and infrastructures.
The importance of intact ecosystems for human-wellbeing as well as the dependence on functions and services they provide is undoubted. But still neither the costs of ecosystem degradation nor the benefits from ecosystem functions and services appear on socio-economic balance sheets when development takes place. Consequently overuse of natural resources is socio-economically promoted by conventional resource management policies and external effects (externalities), equally positives and negatives, remain unregarded. In this context the potential of payments for hydrological ecosystem services as a political instrument to foster sustainable natural resource use, and rural development shall be investigated. This paper introduces the principle concept of such payments, presents a case study from Nicaragua and highlights preliminary effects of the application of this instrument on natural resource use and development.