Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
Document Type
- Contribution to Periodical (409)
- Report (362)
- Peer-Reviewed Article (243)
- Part of a Book (214)
- Conference Object (143)
- Working Paper (63)
- Doctoral Thesis (24)
- Book (17)
- Master Thesis (4)
- Lecture (3)
- Habilitation (1)
- Periodical Part (1)
Language
Division
Der Politikbericht ist ein Ergebnis des Forschungsvorhabens "Technologien für die Energiewende", das vom Bundesministerium für Wirtschaft und Energie (BMWi) als Teil des strategischen Leitprojekts "Trends und Perspektiven der Energieforschung" von 2016 bis 2018 gefördert wurde. Er enthält neben einer kurzen deutschen und englischen Einleitung vierseitige Zusammenfassungen zu jedem der 31 analysierten Technologiefelder und eine Kurzdarstellung der Bewertungsmethodik. Die Zusammenfassungen sind gegliedert nach Definition des Technologiefeldes, aktueller Stand der Technologie, ausgewählte Bewertungskriterien und F&E-Empfehlungen.
Der Teilbericht 2 enthält alle 31 Technologieberichte, die im Forschungsvorhaben "Technologien für die Energiewende" erstellt wurden. Für jedes Technologiefeld wird der Entwicklungsstatus und der Bedarf an Forschung und Entwicklung dargestellt. Die Bewertung erfolgte mittels 12 Bewertungskriterien, die nach dem klimapolitischen und energiewirtschaftlichen Beitrag der jeweiligen Technologien fragen, die Positionierung deutscher Unternehmen im internationalen Kontext betrachten sowie die Systemkompatibilität bewerten. Hinzu kommen Aspekte der gesellschaftlichen Akzeptanz sowie des Standes von F&E im internationalen Vergleich.
Band 1 enthält die Technologieberichte aus den Bereichen Erneuerbare Energien, konventionelle Kraftwerke und Infrastruktur.
Der Teilbericht 2 enthält alle 31 Technologieberichte, die im Forschungsvorhaben "Technologien für die Energiewende" erstellt wurden. Für jedes Technologiefeld wird der Entwicklungsstatus und der Bedarf an Forschung und Entwicklung dargestellt. Die Bewertung erfolgte mittels 12 Bewertungskriterien, die nach dem klimapolitischen und energiewirtschaftlichen Beitrag der jeweiligen Technologien fragen, die Positionierung deutscher Unternehmen im internationalen Kontext betrachten sowie die Systemkompatibilität bewerten. Hinzu kommen Aspekte der gesellschaftlichen Akzeptanz sowie des Standes von F&E im internationalen Vergleich.
Band 2 enthält die Technologieberichte aus den Bereichen Sektorenkopplung, Energie- und Ressourceneffizienz in Gebäuden sowie in der Industrie und integrative Aspekte.
Im Herbst 2018 wird das neue Energieforschungsprogramm (EFP) der Bundesregierung verabschiedet. Das Forschungsprojekt "Technologien für die Energiewende", kurz TF_Energiewende, hat hierfür eine wesentliche wissenschaftliche Basis geliefert. Für 31 Technologiefelder, die mehrere Hundert Technologien umfassen, analysierten die Projektpartner das Innovations- und Marktpotenzial, bewerteten Chancen und Risiken sowie den möglichen Beitrag der Technologien zur Umsetzung der Energiewende und zeigten Forschungs- und Entwicklungsbedarf auf. Die nun veröffentlichten Ergebnisse dienen gleichzeitig als umfassendes Nachschlagewerk für Entscheider in Unternehmen, Forschungsabteilungen, Fördergeber und die interessierte Fachöffentlichkeit.
The concept of regime and "flat ontologies" : empirical potential and methodological implications
(2012)
There is significant potential for family farming to contribute to several dimensions of the Sustainable Development Goals adopted by the United Nations General Assembly in 2015. Our research aims to provide insights to help strengthen sustainable family farming. We focus on initiatives that have advanced sustainable family farming innovations in Colombia and analyse the factors and dynamics that have led to the limited penetration of those innovations across the country. To that aim, a transformative methodology is applied involving representatives of farmers' associations, supporting organisations and researchers from various disciplinary fields. We analyse the network of initiatives against the conceptual background of sociotechnical niches and identify a stable niche where generic lessons are being systematically identified and used to establish replication projects. However, this niche is still limited in its breadth, which results in a low capacity for expansion and a strong dependency on international donors for reproducing experiences. Specific recommendations are outlined for broadening the type of actors involved in the interpretation and dissemination of lessons from the niche. Moreover, we outline suggestions for further research and conceptualisation in two directions: for exploring effective ways of broadening the niche and translating niche lessons to state policies and for deepening the understanding of interactions between the niche and other levels.
Several low-carbon energy roadmaps and scenarios have recently been published by the European Commission and the International Energy Agency (IEA) as well as by various stakeholders such as Eurelectric, ECF and Greenpeace. Discussions of these studies mainly focus on technology options available on the electricity supply side and mostly omit the significant challenges that all of the scenarios impose on the energy demand side.
A comparison of 5 decarbonisation scenarios from 4 of the most relevant recent scenario studies for the EU shows that all of them imply significant efficiency improvements in traditional appliances, usually well above levels historically observed over longer periods of time. At the same time they assume substantial electrification of transportation and heating. The scenarios suggest that both of these challenges need to be tackled successfully for decarbonising the energy system.
With shares of renewable electricity reaching at least 60 % of supply in 2050 in almost all of the decarbonisation scenarios, the adaptation of demand to variable supply becomes increasingly important. This aspect of demand side management should therefore be part of any policy mix aiming for a low-carbon power system.
Based on a quantitative analysis of 5 decarbonisation scenarios and a comparison with historical evidence we derive the (implicit) new challenges posed by the current low-carbon roadmaps and develop recommendations for energy policy on the electricity demand side.
The experience curve theory assumes that technology costs decline as experience of a technology is gained through production and use. This article reviews the literature on the experience curve theory and its empirical evidence in the field of electricity generation technologies. Differences in the characteristics of experience curves found in the literature are systematically presented and the limitations of the experience curve theory, as well as its use in energy models, are discussed. The article finds that for some electricity generation technologies, especially small-scale modular technologies, there has been a remarkably strong (negative) relationship between experience and cost for several decades. Conversely, for other technologies, especially large-scale and highly complex technologies, the experience curve does not appear to be a useful tool for explaining cost changes over time. The literature review suggests that when analysing past cost developments and projecting future cost developments, researchers should be aware that factors other than experience may have significant influence. It may be worthwhile trying to incorporate some of these additional factors into energy system models, although considerable uncertainties remain in quantifying the relevance of some of these factors.
The future belongs to the youth, but do they really have a say in it? Learning processes with regard to a successful socio-ecological change must start in childhood and adolescence in order to succeed in social transformation. The youth cannot be a passive part in a changing society - they have to be actively included in its design. When allowed to participate, young people can make important and effective contributions - which should not be reduced to sub-projects and opportunity structures. In a socio-political context, participation means involvement, collaboration, and commitment. In the context of intra- and inter-generational equity, as the core part of sustainable development, participation strategies should be developed that allow for a permanent and purposeful involvement of children and adolescents. Participation of young people is an important and appropriate step in strengthening those who are so strongly affected by the planning processes but are otherwise powerless. A successful involvement and participation of non-professional actors requires a target group-oriented method, a supportive culture of participation, as well as clarity and decision latitude. Abiding by these rules leads to central results.
The greenhouse gas balance
(2013)
How can renewable energy sources be efficiently integrated into the North African electricity systems? By using techno-economic modeling methods, this book explores optimized electricity system expansion pathways until the year 2030 for the five North African countries - Morocco, Algeria, Tunisia, Libya and Egypt. The results indicate that renewable energy integration is actually a viable business case for the entire region, if wind and solar capacities are properly planned in conjunction with the conventional generation system and under consideration of the country-specific electricity supply-/demand patterns. Further aspects featured in this publication are the impact of renewable power on the transnational electricity transmission system and the question how decision making processes about renewable energy strategies can be improved in the North African context. The book is a contribution to the scientific literature about energy issues in the Middle East and North Africa (MENA), but also seeks to address political and industrial practitioners concerned with the development of the region's renewable energy future.
In addition to the expansion of renewable energies, the efficient use of energy is crucial in order to ensure energy transition successful. The Federal Government of Germany has therefore set itself clear objectives with the National Energy Efficiency Action Plan (NAPE), which aims to reduce the primary energy consumption in Germany - compared to 2008 levels - by 20 per cent until 2020, and by 50 per cent until 2050. In addition, greenhouse gas emissions should fall by 40 per cent compared to 1990.
To reach this goal, the German Federal Ministry of Economic Affairs and Energy (BMWi) inter alia launched the "National Top Runner Initiative (NTRI)" in January 2016. It is an important component and concerns private homes, as well as industry, retail and services.
The NTRI is intended to bring energy efficient and high-quality appliances (so called Top Runners) onto the market more quickly, thus accelerate market replacement. For this purpose, motivation, knowledge and competence in product-related energy efficiency is to be strengthened and expanded along the whole value chain - from the appliance manufacturer to the retailer and the consumer. Manufacturers are pushed to develop more efficient products and consumers get valuable information about Top-Runner products and how they can benefit. In this context, retailers are especially relevant as they act as "gatekeeper" between manufacturers and consumers. They play a key role in advancing an energy efficient production and consumption. They do not only select the products but they also have a direct contact to consumers and influence the purchase decision. In this paper, special emphasis will be put on the role of retailers and the efforts of the National Top Runner Initiative will be illustrated. Barriers and incentives to motivate this target group will be elaborated.
In October 2014, the European Council agreed on a target of improving overall energy efficiency by at least 27 per cent by 2030. According to the European Council's conclusions, this target should not be translated into nationally binding targets. Nevertheless individual Member States are free to set higher national objectives if desired. However, it is difficult to assess the degree of ambition of a national target because so far not much light has been shed upon the exact size of the untapped efficiency potentials.
This paper provides an in-depth analysis and comparison of existing studies on energy efficiency potentials in the European Union's (EU) Member States by 2030. It includes a structured overview of the results, information on the quality of the available data and suggestions for improvement.
The review shows that comprehensive studies on national energy efficiency potentials are rare and hardly comparable. The existing studies agree on the existence of significant potentials for energy efficiency. Their outcomes, however, vary significantly in terms of national levels. Assuming low policy intensity, energy savings between 10 and 28 per cent could be realised by 2030 compared to a baseline development, in the case of high policy intensity 7-44 per cent. Technical energy efficiency potentials in the different EU Member States are estimated at 14-52 per cent. On average, energy savings of 27 per cent by 2030 appear to be feasible with significant policy effort. We conclude that the deviation in Member States' energy efficiency potentials resulting from different studies represents an indication of the so far poor quality of underlying data. In order to allow for a concretisation of efficiency potential estimates, the comparability and detail of information sources should be improved.
Energy used in buildings is responsible for more than 40% of energy consumption and greenhouse gas (GHG) emissions of the EU and their share in cost-efficient GHG mitigation potentials is estimated to be even higher. In spite of its huge savings potential of up to 80%, achievements are very slow in the building sector and much stronger political action seems to be needed. One important step in this direction has been the recast of the Energy Performance of Buildings Directive (EPBD) in autumn 2009. However, strong national implementation including powerful packages of flanking measures seems to be crucial to really make significant progress in this important field. In order to directly improve political action, we provide a differentiated country-by-country bottom up simulation of residential buildings for the whole EU, Norway, Iceland, Croatia and Liechtenstein. The analysis provides a database of the building stock by construction periods, building types, as well as typical building sizes. It includes a simulation of the thermal quality and costs of the components of the building shell for new buildings as well as the refurbishment of the existing building stock. Based on this differentiated analysis, we show in detail what would be needed to accelerate energy savings in the building sector and provide a more precise estimate of the potentials to be targeted by particular policies. We demonstrate, e.g. that the potential of building codes set via the EPBD would be located mainly in those countries that already have quite stringent codes in place. We show as well the high relevance of accelerating refurbishments and re-investment cycles of buildings. By providing a clear estimate of the full costs related to such a strategy, we highlight a major obstacle to accelerated energy-efficient building renovation and construction.
Distributed cogeneration units are flexible and suited to providing balancing power, thereby contributing to the integration of renewable electricity. Against this background, we analysed the technical potential and ecological impact of CHP (combined heat and power) systems on the German minutes reserve market for 2010, 2020 and 2030. Typical CHP plants (from 1 to 2800 kWel) were evaluated in relation to typical buildings or supply cases in different sectors. The minutes reserve potential was determined by an optimisation model with a temporal resolution of 15 min. The results were scaled up to national level using a scenario analysis for the future development of CHP. Additionally, the extent to which three different flexibility measures (double plant size/fourfold storage volume/emergency cooler) increase the potential provision of balancing power was examined. Key findings demonstrate that distributed CHP could contribute significantly to the provision of minutes reserve in future decades. Flexibility options would further enhance the theoretical potential. The grid-orientated operating mode slightly increases CO2 emissions compared to the heat-orientated mode, but it is still preferable to the separate generation of heat and power. However, the impacts of a flexible mode depend greatly on the application and power-to-heat ratio of the individual CHP system.
Concentrated solar power (CSP) plants are one of several renewable energy technologies with significant potential to meet a part of future energy demand. An integrated technology assessment shows that CSP plants could play a promising role in Africa and Europe, helping to reach ambitious climate protection goals. Based on the analysis of driving forces and barriers, at first three future envisaged technology scenarios are developed. Depending on the underlying assumptions, an installed capacity of 120 GWel, 405 GWel or even 1,000 GWel could be reached globally in 2050. In the latter case, CSP would then meet 13–15% of global electricity demand. Depending on these scenarios, cost reduction curves for North Africa and Europe are derived. The cost assessment conducted for two virtual sites in Algeria and in Spain shows a long-term reduction of electricity generating costs to figures between 4 and 6 ct/kWhel in 2050. The paper concludes with an ecological analysis based on life cycle assessment. Although the greenhouse gas emissions of current (solar only operated) CSP systems show a good performance (31 g CO2-equivalents/kWhel) compared with advanced fossil-fired systems (130–900 CO2-eq./kWhel), they could further be reduced to 18 g CO2-eq./kWhel in 2050, including transmission from North Africa to Europe.
A significant reduction in greenhouse gas emissions will be necessary in the coming decades to enable the global community to avoid the most dangerous consequences of man-made global warming. This fact is reflected in Germany's 7th Federal Energy Research Program (EFP), which was adopted in 2018. Direct Air Capture (DAC) technologies used to absorb carbon dioxide (CO2) from the atmosphere comprise one way to achieve these reductions in greenhouse gases. DAC has been identified as a technology (group) for which there are still major technology gaps. The intention of this article is to explore the potential role of DAC for the EFP by using a multi-dimensional analysis showing the technology's possible contributions to the German government's energy and climate policy goals and to German industry's global reputation in the field of modern energy technologies, as well as the possibilities of integrating DAC into the existing energy system. The results show that the future role of DAC is affected by a variety of uncertainty factors. The technology is still in an early stage of development and has yet to prove its large-scale technical feasibility, as well as its economic viability. The results of the multi-dimensional evaluation, as well as the need for further technological development, integrated assessment, and systems-level analyses, justify the inclusion of DAC technology in national energy research programs like the EFP.
International consensus is growing that a transition towards a low carbon society (LCS) is needed over the next 40 years. The G8, the Major Economies Forum on Energy and Climate, as well as the Ad Hoc Working Group on Long-term Cooperative Action under the United Nations Framework Convention on Climate Change, have concluded that states should prepare their own Low-emission Plans or Low-emission Development Plans and such plans are in development in an increasing number of countries.
An analysis of recent long-term low emission scenarios for Germany shows that all scenarios rely heavily on a massive scale up of energy efficiency improvements based on past trends. However, in spite of the high potential that scenario developers assign to this strategy, huge uncertainty still exists in respect of where the efficiency potentials really lie, how and if they can be achieved and how much their successful implementation depends on more fundamental changes towards a more sustainable society (e.g. behavioural changes).
In order to come to a better understanding of this issue we specifically examine the potential for energy efficiency in relation to particular demand sectors. Our comparative analysis shows that despite general agreement about the high importance of energy efficiency (EE), the perception on where and how to achieve it differ between the analysed scenarios. It also shows that the close nexus between energy efficiency and non-technical behavioural aspects is still little understood. This leads us to the conclusion that in order to support energy policy decisions more research should be done on energy efficiency potential. A better understanding of its potential would help energy efficiency to fulfil its role in the transition towards a LCS.
To combat climate change, it is anticipated that in the coming years countries around the world will adopt more stringent policies to reduce greenhouse gas emissions and increase the use of clean energy sources. These policies will also affect the industry sector, which means that industrial production is likely to progressively shift from CO2-emitting fossil fuel sources to renewable energy sources. As a result, a region's renewable energy resources could become an increasingly important factor in determining where energy-intensive industries locate their production. We refer to this pull factor as the "renewables pull" effect. Renewables pull could lead to the relocation of some industrial production as a consequence of regional differences in the marginal cost of renewable energy sources. In this paper, we introduce the concept of renewables pull and explain why its importance is likely to increase in the future. Using the examples of direct reduced iron (DRI) and ammonia production, we find that the future costs of climate-neutral production of certain products is likely to vary considerably between regions with different renewable energy resources. However, we also identify the fact that many other factors in addition to energy costs determine the decisions that companies make in term of location, leaving room for further research to better understand the future relevance of renewables pull.
Industrial demand response can play an important part in balancing the intermittent production from a growing share of renewable energies in electricity markets. This paper analyses the role of aggregators - intermediaries between participants and power markets - in facilitating industrial demand response. Based on the results from semi-structured interviews with German demand response aggregators, as well as a wider stakeholder online survey, we examine the role of aggregators in overcoming barriers to industrial demand response. We find that a central role for aggregators is to raise awareness for the potentials of demand response, as well as to support implementation by engaging key actors in industrial companies. Moreover, we develop a taxonomy that helps analyse how the different functional roles of aggregators create economic value. We find that there is considerable heterogeneity in the kind of services that aggregators offer, many of which do create significant economic value. However, some of the functional roles that aggregators currently fill may become obsolete once market barriers to demand response are reduced or knowledge on demand response becomes more diffused.
Germany and Japan have both gained substantial experience with hydrogen production and applications, albeit with focus on different sectors. They also share similar drivers for hydrogen development and, of course, similar technical and economic opportunities and challenges. However, there also are relevant differences in the policy priorities and approaches.
Notwithstanding differing emphases and patterns, the two countries share three main drivers for hydrogen development and deployment: climate mitigation and other environmental goals, energy supply diversification, and technological leadership. In this context, hydrogen has been identified by the German and the Japanese governments during the Energy Policy Dialogue as having potential for closer cooperation.
The authors of this study provide an overview of demand-side deployment by sector (residential, transport, industry, power generation and power-to-x) for both countries, as well as of their hydrogen policy debates, key institutions, R&D programs and demonstration projects. They also present a short survey on relevant international platforms and initiatives in which Japan and Germany participate.
On the basis of a meta-analysis of the role of hydrogen in 18 long-term energy system scenarios for Germany and 12 scenarios for Japan, this study draws conclusions on the possible role of hydrogen in the long term energy policy debates of both countries. Subsequently, the authors discuss sustainability criteria and certification schemes for clean hydrogen, compare the greenhouse gas intensity of different hydrogen supply chains and provide a data-based analysis to identify countries which could become important suppliers of clean hydrogen.
Iran is one of the largest oil producers and natural gas owners globally. However, it has to struggle with domestic energy shortages, economic losses through energy subsidisation and inefficient energy infrastructures. Furthermore, GHG and other energy related emissions are rapidly increasing and posing a growing threat to local environment as well as global climate. With current trends prevailing, Iran may even become a net energy importer over the next decades. Resource allocation is therefore a crucial challenge for Iran: domestic consumption stands versus exports of energy.
The energy transformation sector clarifies Iran's dilemma: soaring electricity demand leads to blackouts, and power plant new builds are far from using most efficient technologies (e. g. CHP), therefore keeping energy intensive structures. But fossil fuels could be sold on international markets if spared by having more efficient energy infrastructures.
As shown by the high energy intensity of its economy, Iran has large potentials for energy saving and efficiency. In order to highlight and better identify this potential the paper contrasts a high efficiency scenario in all sectors of energy transformation and consumption with a possible "business as usual" development.
Using a bottom-up approach, the analysis provides a sector-by-sector perspective on energy saving potentials. These can be utilised on the demand side especially in the transport sector (fuels) and in households (electricity for appliances, natural gas for heating). Electricity generation bears efficiency potentials as well.
We conclude that Iran, but also the international community, would benefit on various levels from a more energy-efficient Iranian economy: Energy exports could increase, generating more foreign currency and reducing the pressures on international oil and gas prices; energy consumption would decrease, leading to lower needs for nuclear energy and for subsidies to Iranian people, as well as to a reduction of the high external costs entailed by fossil fuels combustion (smog in cities, environmental stress).
Based on a comprehensive scenario analysis of the EU's GHG emissions by 2020, we show that the 20% energy savings target set in the Action Plan "Doing more with less" in 2006 is still the most significant and thus indispensable strategy element within an ambitious EU climate and energy strategy targeting at a 30% reduction of GHG emissions by 2020.
The scenario analysis provides a sector by sector projection of potential future energy use and GHG emissions, combined with a detailed policy analysis of the core policies on energy efficiency by the EU and its Member States taken from current research results by the authors and others.
Consequently the paper identifies and quantifies the current implementation deficit in the EU and shows that, despite of sufficient targets, implementation is still significantly lacking in almost all fields of energy efficiency. Some, e.g. transport sector and buildings, are still substantially far from receiving the necessary political impetus. The paper also demonstrates co-benefits of a strong energy efficiency strategy, e.g. the achievability of the targets of the RES directive, which crucially depends on a strong efficiency policy.
We conclude that the efforts of the energy efficiency policy of the EU and its Member States have to be significantly intensfied. As proposed by the EU in case that other developed and key developing countries take up comparable targets in order to fulfil its role in the climate and energy strategy. To achieve this, we offer an analysis of the current weaknesses of EU energy efficiency policy and derive recommendations on how the EU can still reach its targets for 2020.
The role of gender concerns in the planning of small-scale energy projects in developing countries
(2014)
The role of gender concerns in the planning of small-scale energy projects in developing countries
(2015)
Based on different current long-term energy scenarios the paper discusses the future perspectives of hydrogen in the German energy system as a representative example for the development of sustainable energy systems. The scenario analysis offers varying outlines of the future energy system that determine the possible role of hydrogen. The paper discusses the possibilities of expanding the share of renewable energy and the resulting prospects for establishing clean hydrogen production from renewable energy sources. Emphasis is given to the questions of an ecologically efficient allocation of limited renewable energy resources that can only be assessed from asystems analysis perspective. Findings from recent studies for Germany reveal a strong competition between the direct input into the electricity system and an indirect use as fuel in the transport sector. Moreover, the analysis underlines the paramount importance of reducing energy demand as the inevitable prerequisite for any renewable energy system.
Various electricity generation technologies using different primary energy sources are available. Many published studies compare the costs of these technologies. However, most of those studies only consider plant-level costs and do not fully take into account additional costs that societies may face in using these technologies. This article reviews the literature on the costs of electricity generation technologies, aiming to determine which types of costs are relevant from a societal point of view when comparing generation technologies. The paper categorises the relevant types of costs, differentiating between plant-level, system and external costs as the main categories. It discusses the relevance of each type of cost for each generation technology. The findings suggest that several low-carbon electricity generation technologies exhibit lower social costs per kWh than the currently dominant technologies using fossil fuels. More generally, the findings emphasise the importance of taking not only plant-level costs, but also system and external costs, into account when comparing electricity generation technologies from a societal point of view. The article intends to inform both policymakers and energy system modellers, the latter who may strive to include all relevant types of costs in their models.
As part of this dissertation, a categorisation of the social costs of electricity supply is suggested. The following three main cost categories are differentiated: plant-level costs, system costs and external costs. Different types of costs are allocated to these categories and are examined and quantified (to the extent possible) for several power generation technologies. The limits of monetizing certain types of costs are also discussed. In a further step, and based on a large number of empirical studies, individual factors that have had a significant influence on the development of plant-level costs in the past, are identified and categorized. Finally, based on an online survey conducted among energy modellers, the dissertation examines to what extent the identified relevant types of costs and cost-influencing factors are taken into account in different types of energy models.
Organic waste to energy (OWtE) technologies have been developed and implemented in Latin America and the Caribbean (LAC) countries. However, they are still far away to significantly contribute not only to treat the ever-increasing waste volumes in the region but also to supply the regional energy demand and meet national carbon emission goals. The technical complexity of these technologies aligned with lack of research, high investment costs and political deficiencies have not allowed for an appropriate implementation of OWtE in the region, where the applicability of large-scale plants remains to be demonstrated. This research presents the state-of-the art of OWtE technologies in the context of the LAC countries based on archival research method. In addition, it presents challenges and opportunities that the region is facing for an adequate implementation of these technologies. The main findings show that OWtE have the potential to improve waste and energy systems in the region by reducing environmental impacts along with a series of social and economic benefits, such as increasing access to a sustainable energy supply. Diverse researches indicate principally anaerobic digestion, fermentation (e.g. 2G bioethanol, etc.), microbial fuel cells, gasification and pyrolysis as efficient technologies to treat solid organic wastes and produce bioenergy.
Energy-intensive processing industries (EPIs) produce iron and steel, aluminum, chemicals, cement, glass, and paper and pulp and are responsible for a large share of global greenhouse gas emissions. To meet 2050 emission targets, an accelerated transition towards deep decarbonization is required in these industries. Insights from sociotechnical and innovation systems perspectives are needed to better understand how to steer and facilitate this transition process. The transitions literature has so far, however, not featured EPIs. This paper positions EPIs within the transitions literature by characterizing their sociotechnical and innovation systems in terms of industry structure, innovation strategies, networks, markets and governmental interventions. We subsequently explore how these characteristics may influence the transition to deep decarbonization and identify gaps in the literature from which we formulate an agenda for further transitions research on EPIs and consider policy implications. Furthering this research field would not only enrich discussions on policy for achieving deep decarbonization, but would also develop transitions theory since the distinctive EPI characteristics are likely to yield new patterns in transition dynamics.
This paper examines the effects of an increased integration of concentrated solar power (CSP) into the conventional electricity systems of Morocco and Algeria. A cost-minimizing linear optimization tool was used to calculate the best CSP plant configuration for Morocco's coal-dominated power system as well as for Algeria, where flexible gas-fired power plants prevail. The results demonstrate that in both North African countries, storage-based CSP plants offer significant economic advantages over non-storage, low-dispatchable CSP configurations. However, in a generalized renewable integration scenario, where CSP has to compete with other renewable generation technologies, like wind or photovoltaic (PV) power, it was found that the cost advantages of dispatchability only justify CSP investments when a relatively high renewable penetration is targeted in the electricity mix.
This study intends to provide a comprehensive overview of the water-energy nexus' relevance to the Iranian electricity sector, by illustrating key trends, analysing water-related challenges and identifying knowledge gaps. It summarises the results of a workshop, and a series of dialogues with Iranian energy and water experts, in which both the current situation and future water-related risks and impacts on the Iranian power sector were discussed. Based on those results, it highlights research needs and further options for scientific collaboration.
There's no decarbonisation without energy efficiency : but take care of the "rebound effects"
(2013)
Dengan semakin berkurangnya "anggaran karbon" atau carbon budget di seluruh dunia, berbagai negara sedang mencari solusi untuk mengurangi emisi gas rumah kaca. Karena produksi dan penggunaan batu bara dapat dikatakan sebagai salah satu penghasil emisi karbon yang sangat besar dan memicu perubahan iklim, oleh karena itu dapat diperkirakan bahwa wilayah penghasil batu bara akan sangat terdampak akibat transformasi energi dari sistem energi yang berbasis bahan bakar fosil menjadi energi terbarukan. Tantangan yang muncul tidak hanya di bidang produksi energi, perlindungan lingkungan, tetapi juga dalam aspek ekonomi dan sosial di kawasan kawasan batu bara yang tengah menghadapi transformasi - sering disebut dengan istilah "Transisi Berkeadilan". Para pengambil keputusan di wilayah penghasil batu bara, sangat membutuhkan alat pendukung untuk memulai langkah-langkah untuk mendiversifikasi ekonomi lokal yang disaat bersamaan juga mendukung pekerja dan masyarakat lokal. Transisi Berkeadilan ini membutuhkan perencanaan yang komprehensif, kebijakan baru dan penyesuaian serta keterlibatan semua pemangku kepentingan.
Oleh karena itu, Wuppertal Institute merancang "Just Transition Toolbox" untuk memberikan dukungan bagi para praktisi di kawasan penghasil batu bara di seluruh dunia yang menggambarkan tantangan dan peluang dalam transisi berkelanjutan untuk audiens global. Toolbox Transisi Berkeadilan ini terdiri dari informasi tentang pengembangan strategi, rekomendasi untuk struktur tata kelola, mendorong lapangan kerja berkelanjutan, menunjukan pilihan teknologi dan menyoroti rehabilitasi lingkungan dan penggunaan kembali situs dan infrastruktur terkait batubara. Toolbox ini dikembangkan berdasarkan seperangkat alat yang dirancang oleh Wuppertal Institute melalui kerja sama dengan berbagai pemangku kepentingan atas inisiatif Uni Eropa untuk daerah-daerah kawasan Batubara yang berada dalam masa transisi. Toolbox ini juga menampilkan pelajaran yang diambil dari kawasan batu bara mitra SPIPA seperti India, Indonesia, Afrika Selatan, Jepang, Korea Selatan, Kanada, dan Amerika Serikat. Akronim SPIPA adalah kependekan dari "Kemitraan Strategis untuk Implementasi Perjanjian Persetujuan Paris" pada program UE-BMU yang dibiayai bersama oleh GIZ.
Toothless tiger? : Is the EU action plan on energy efficiency sufficient to reach its target?
(2007)
Motivated by, inter alia, the increasing energy prices, the security of energy supply and climate change, the new EU "Action Plan for Energy Efficiency: Realising the Potential" (EEAP), sets out the policies and measures required to be implemented over the next six years to achieve the EU's goal of reducing annual primary energy consumption by about 20 % by 2020. By increasing energy efficiency, the security of energy supply and the reduction of carbon emissions are also improved.
The paper will analyse the 20 % target of the new EEAP for the energy demand side by comparison with different recent energy scenarios for the EU. It will therefore review the recommended policies and measures and examine, in which energy demand sectors energy efficiency may be increased and to which extend. The main focus is whether the recommended policies and actions will be sufficient and which additional measures may be useful, if additional measures are needed.
The contribution of the EU bioeconomy to sustainable development depends on how it is implemented. A high innovation potential is accompanied by considerable risks, in particular regarding the exacerbation of global land use conflicts. This article argues that a systemic monitoring system capable of connecting human-environment interactions and multiple scales of analysis in a dynamic way is needed to ensure that the EU bioeconomy transition meets overarching goals, like the Sustainable Development Goals. The monitoring should be centered around a dashboard of key indicators and targets covering environmental, economic, and social aspects of the bioeconomy. With a focus on the land dimension, this article examines the strengths and weakness of different economic, environmental and integrated models and methods for monitoring and forecasting the development of the EU bioeconomy. The state of research on key indicators and targets, as well as research needs to integrate these aspects into existing modeling approaches, are assessed. The article concludes with key criteria for a systemic bioeconomy monitoring system.
22 years are left until the German target for climate neutrality should be reached. For the industrial sector, this implies a fundamental change and an acceleration of emission reduction, as from 2000 to 2021 the sector has reduced its greenhouse gas (GHG) emissions by only 13% (ERK, 2022). For the large structures, plants and assets that are characteristic for the energy intensive industrial sectors, the timespan implies no room for delay. One sector facing particular challenges is the chemical industry. Here, fossil resources are used not only for energetic purposes but for feedstock as well, in the petrochemical industry in particular. The efforts made in the petrochemical sector thereby not only affects the sectors own emissions, but the chemicals value chain at large, including the management of end-of-life products. The dependency on energetic resources for material use also means that there is a particular connection from the chemical industry to the energy system at large, which also entails special consideration.
The chemical industry also has a particular relevance to the Antwerp-Rotterdam-Rhine-Ruhr-Area (ARRRA) which hosts several large petrochemical clusters in Germany as well as the Netherlands and Belgium, with complexly interlinked production chains. In reaching the climate targets, these regions especially face significant changes and may have the opportunity to position themselves as frontrunners for industrial transformation. That is, if a successful strategy can be found.
In the recent years, numerous scenario analyses and roadmaps have been released drawing out pathways for chemical industries to develop in line with national and international climate targets. This can entail mapping of technological options, important prerequisites, particular challenges as well as important opportunities and timeframes. This meta-analysis summarizes and compares the findings of some of the most recent previous works at the national, European and global level. As the goal is to investigate the various strategic options and development paths for Germany and the ARRRA, it has a particular focus on roadmaps for Germany, the Netherlands and Belgium. It takes a quantitative as well as qualitative approach, looking both at resource and production volumes, different emission reduction strategies relative importance, as well as policy recommendations and other important framework conditions. A particular focus is put on the use of non-fossil feedstocks to reduce emissions.
The paper reviews the current knowledge on the use of biomass for non-food purposes, critically discusses its environmental sustainability implications, and describes the needs for further research, thus enabling a more balanced policy approach. The life-cylce wide impacts of the use of biomass for energy and material purposes derived from either direct crop harvest or residuals indicate that biomass based substitutes have a different, not always superior environmental performance than comparable fossil based products. Cascading use, i.e. when biomass is used for material products first and the energy content is recovered from the end-of-life products, tends to provide a higher environmental benefit than primary use as fuel. Due to limited global land resources, non-food biomass may only substitute for a certain share of non-renewables. If the demand for non-food biomass, especially fuel crops and its derivates, continues to grow this will inevitably lead to an expansion of global arable land at the expense of natural ecosystems such as savannas and tropical rain forests. Whereas the current aspirations and incentives to increase the use of non-food biomass are intended to counteract climate change and environmental degradation, they are thus bound to a high risk of problem shifting and may even lead to a global deterioration of the environment. Although the "balanced approach" of the European Union's biomass strategy may be deemed a good principle, the concrete targets and implementation measures in the Union and countries like Germany should be revisited. Likewise, countries like Brazil and Indonesia may revisit their strategies to use their natural resources for export or domestic purposes. Further research is needed to optimize the use of biomass within and between regions.
Towards an effective and equitable climate change agreement : a Wuppertal proposal for Copenhagen
(2009)
This paper presents comprehensive proposals for the post-2012 climate regime: the scale of the challenge, emission targets for industrialised countries, increased actions by Southern countries, financing, technology, adaptation and deforestation. The proposals are based on ongoing research by the Wuppertal Institute.
The role of hydrogen in long run sustainable energy scenarios for the world and for the case of Germany is analysed, based on key criteria for sustainable energy systems. The possible range of hydrogen within long-term energy scenarios is broad and uncertain depending on assumptions on used primary energy, technology mix, rate of energy efficiency increase and costs degression ("learning effects"). In any case, sustainable energy strategies must give energy efficiency highest priority combined with an accelerated market introduction of renewables ("integrated strategy"). Under these conditions hydrogen will play a major role not before 2030 using natural gas as a bridge to renewable hydrogen. Against the background of an ambitious CO2-reduction goal which is under discussion in Germany the potentials for efficiency increase, the necessary structural change of the power plant system (corresponding to the decision to phase out nuclear energy, the transformation of the transportation sector and the market implementation order of renewable energies ("following efficiency guidelines first for electricity generation purposes, than for heat generation and than for the transportation sector")) are analysed based on latest sustainable energy scenarios.
Decarbonisation of energy systems requires deep structural change. The purpose of this research was to analyse the rates of change taking place in the energy systems of the European Union (EU), in the light of the EU's climate change mitigation objectives. Trends on indicators such as energy intensity and carbon intensity of energy were compared with decadal benchmarks derived from deep decarbonisation scenarios for the electricity, residential, transport, and industry sectors. The methodology applied provides a useful and informative approach to tracking decarbonisation of energy systems. The results show that the EU has made significant progress in decarbonising its energy systems. On a number of indicators assessed the results show that a significant acceleration from historical levels is required in order to reach the rates of change seen on the future benchmarks for deep decarbonisation. The methodology applied provides an example of how the research community and international organisations could complement the transparency mechanism developed by the Paris Agreement on climate change, to improve understanding of progress toward low-carbon energy systems.
Community-based approaches to natural resource management are being discussed and experienced as promising ways for pursuing ecological conservation and socio-economic development simultaneously. However, the multiplicity of levels, scales, objectives and actors that are involved in sustainability transformations tends to be challenging for such bottom-up approaches. Collaborative and polycentric governance schemes are proposed for dealing with those challenges. What has not been fully explored is how knowledge from local contexts of community-based initiatives can be diffused to influence practices on higher levels and/or in other local contexts. This study explores how theoretical advances in the diffusion of grassroots innovation can contribute to understanding and supporting the diffusion of knowledge and practices from community-based initiatives and proposes a transdisciplinary approach to diffusion. For that aim, we develop an analytical perspective on the diffusion of grassroots innovations that takes into consideration the multiplicity of actors, levels and scales, the different qualities/types of knowledge and practices, as well as their respective contributions. We focus on the multiplicity and situatedness of cognitive frames and conceptualize the diffusion of grassroots innovations as a transdisciplinary process. In this way three different diffusion pathways are derived in which the knowledge and practices of grassroots initiatives can be processed in order to promote their (re)interpretation and (re)application in situations and by actors that do not share the cognitive frame and the local context of the originating grassroots initiative. The application of the developed approach is illustrated through transdisciplinary research for the diffusion of sustainable family farming innovations in Colombia. This conceptualization accounts for the emergence of multiplicity as an outcome of diffusion by emphasizing difference as a core resource in building sustainable futures.
Transformation in der Industrie : Herausforderungen und Lösungen für erneuerbare Prozesswärme
(2023)
Der Beitrag stellt Ergebnisse aus der "AG Industrielle Prozesswärme" des Thinktanks IN4climate.NRW in Zusammenarbeit mit dem wissenschaftlichen Kompetenzzentrum Sci4Climate.NRW vor. Hier wurde in einem mehrjährigen Stakeholder-Prozess unter Einbindung von Wissenschaft, Politik und Unternehmen der energieintensiven Industrie in NRW ein Diskussionspapier entwickelt, welches in einem "Vier-Stufen- Modell" eine aus gesamtsystemischer Sicht optimale Vorgehensweise zur Dekarbonisierung bzw. Defossilisierung industrieller Prozesswärme aufzeigt. Flankierend werden über die Koautor:innen Technologie-Beispiele innerhalb des "Vier-Stufen-Modells" aufgezeigt.
Transformation in der Industrie : Herausforderungen und Lösungen für erneuerbare Prozesswärme
(2023)
Transformation zur "Grünsten Industrieregion der Welt" - aufgezeigt für die Metropole Ruhr : Studie
(2021)
Industrieregionen stehen vor besonderen Herausforderungen für eine nachhaltige und klimagerechte Entwicklung, sie müssen zu "grünen Industrieregionen" werden. Doch was macht eine "grüne Industrieregion" überhaupt aus? Die vorliegende Studie des Wuppertal Instituts verdeutlicht, worauf es besonders ankommt, wie Fortschritte gemessen werden können und welche Maßnahmen die erforderliche Transformation beschleunigen können. Das Autorenteam schätzt die Vorreiterpotenziale der Metropole Ruhr für sieben Indikatoren ein, die besonders deutlich bei der Umweltwirtschaft und der Entwicklung der Grün- und Erholungsflächen herausstechen.
Deutschland liegt bei Klimaschutz und der langfristigen Sicherung der Energie- und Rohstoffversorgung weit hinter seinen eigenen Zielen. Nur mit Tempo, Mut und Ehrlichkeit lässt sich der Rückstand jetzt aufholen. Dazu gehören ein beschleunigter Ausbau erneuerbarer Energien, ein sofortiger Aufbau eines umfassenden Netzes für grünen Wasserstoff, verbindliche Ziele für eine echte Kreislaufwirtschaft, klare Vorgaben für den Wohnungsbestand, eine ernsthafte Mobilitätswende und wirksame Anreize für eine nachhaltige Produktion. Bei all dem müssen sozial gerechte Lösungen gefunden werden, nur so lässt sich CO2-Vermeidung und Ressourcenschutz in der Breite durchsetzen.
Das vorliegende Impulspapier des Wuppertals Instituts zeigt, wie sehr Deutschland auf dem Weg zur Nachhaltigkeit seinen eigenen Zielen hinterherhinkt.
Szenarien spielten und spielen eine zentrale Rolle für die Gestaltung der Energiewende. Sie beschreiben dabei auf konsistente Weise die mögliche zukünftige Entwicklung des Systems unter bestmöglicher Berücksichtigung des aktuellen Wissens bezüglich des Systems, d.h. der internen Abhängigkeiten und Wechselwirkungen der Systemkomponenten, aber auch die Abhängigkeit der Systementwicklung von äußeren Faktoren. Damit liefern Szenarien Leitplanken für zentrale technisch-strukturelle, energiepolitische, ökonomische und gesellschaftliche Weichenstellungen, die einen zielgerichteten Transformationsprozess flankieren müssen.
Transformative Innovationen : die Suche nach den wichtigsten Hebeln der Großen Transformation
(2021)
Der hier vorliegende Zukunftsimpuls soll den Grundgedanken der Transformativen Innovationen und ihre Notwendigkeit beschreiben sowie erste Kandidaten für solche Transformativen Innovationen aus diversen Arbeitsbereichen des Wuppertal Instituts vorstellen. Er dient vor allem als Einladung, gemeinsam mit dem Wuppertal Institut über solche Innovationen zu diskutieren, die irgendwo zwischen den großen Utopien und kleinen Nischenaktivitäten liegen. Denn es braucht nicht immer den ganz großen Wurf, um Veränderungen in Gang zu setzen.
Sustainability policy in the early 2000s is based on and therefore influenced by scientific literature on "transition". The importance of this link has inspired the authors to explore the structure of cooperating authors and citation networks in the field. In order to understand "transition" literature, we compare it with an alternative term for change, "transformation", which is also used in the context of socio-technical shifts towards sustainability. We expose the different structures of these fields with an overview of keywords, key references, key authors, and the coherence between references and authors. By analysing co-author and citation networks, we find large differences in these groups of documents. The transition literature is characterised by a large network of directly and indirectly cooperating authors with clear clusters; transformation literature contains smaller author networks. Key transition authors are predominantly Dutch. They repeatedly write together and cite each other's work. The transition literature is tightly knit with high degrees of internal references and a clearly distinguishable core. Transformation literature has fewer connections between authors and articles. The connecting articles, each with many global citations, form its basis. This analysis can be used as a step to continue the debate on the role of transition and transformation literature in sustainability and renewable energy policy. The transformation literature teaches us that older streams of thought are still relevant and may be used as "glue" for linking change with respect to sustainable energy to wider developments. Rediscovering existing literature in new combinations may lead to promising new views on sustainable energy.
A cost-minimizing electricity market model was used to explore optimized infrastructures for the integration of renewable energies in interconnected North African power systems until 2030. The results show that the five countries Morocco, Algeria, Tunisia, Libya and Egypt could together achieve significant economic benefits, reaching up to EUR 3.4 billion, if they increase power system integration, build interconnectors and cooperate on joint utilization of their generation assets. Net electricity exports out of North Africa to Europe or Eastern Mediterranean regions, however, were not observed in the regime of integrated electricity markets until 2030, and could only be realized by much higher levels of renewable energy penetration than currently foreseen by North African governments.
Die Wärmewende ist als Teil der Energiewende ein gesellschaftliches Großprojekt. Für eine erfolgreiche Umsetzung benötigt die Wärmewende im Vergleich zur Stromwende vielfältigere und differenziertere Handlungsmechanismen. Es geht dabei nicht nur um den Ersatz fossiler Energieträger im Bereich der Wärmeversorgung durch regenerative Quellen, sondern vielmehr um einen systemischen Ansatz, der zudem eine stringente Forcierung von Energieeffizienzmaßnahmen, eine optimierte Verzahnung von Strom- und Wärmesystemen sowie eine zielgruppenspezifische Adressierung und Sensibilisierung von Akteursgruppen (hier: Kommunen, Privathaushalte, Industrie, GHD) erforderlich macht.
Mit Inkrafttreten des Kyoto-Protokolls am 16.2.2005 gelten für Deutschland und die meisten anderen Industrieländer völkerrechtlich bindende Minderungsziele für die 6 im Kyoto-Protokoll erfassten Treibhausgase. Damit erlangt eine durchaus kontrovers diskutierte Klimaschutzstrategie, die auf eine stärkere Umstellung der Energienutzung von Öl und Kohle auf mehr Erdgas setzt, zusätzlich an Bedeutung. Der nachfolgende Beitrag setzt sich mit der Klimabilanz des Erdgases unter Berücksichtigung der gesamten Prozesskette auseinander. Insbesondere werden neue Messergebnisse aus Russland dargestellt (Wuppertal Institut 2004), die zeigen, dass die dem Export von russischem Erdgas nach Deutschland zuzuordnenden indirekten Emissionen nur etwa ein Viertel der bei der Erdgasverbrennung entstehenden direkten Emissionen betragen. Damit bleibt Erdgas auch unter Berücksichtigung der indirekten Emissionen in Russland der fossile Energieträger mit den mit Abstand geringsten Treibhausgasemissionen.
Ziel - In diesem Beitrag sollen die mit der Erdgasbereitstellung für den deutschen Markt verbundenen Treibhausgasemissionen entlang der gesamten Prozesskette dargestellt werden, um eine Gesamtbewertung der mit seiner Nutzung verbundenen Treibhausgasemissionen und einen Vergleich mit den entsprechenden Emissionen anderer Energieträger zu ermöglichen. Dabei werden die in bis 2030 zu erwartenden dynamischen Veranderungen sowohl der Gasherkunft, als auch der Technik bei Förderung, Aufbereitung und Transport detailliert berücksichtigt. Ein besonderer Schwerpunkt liegt auf den Emissionen der Erdgasbereitstellung aus Russland, das seine Rolle als führender Erdgaslieferant ggf. noch weiter ausbauen wird.
Ergebnisse und Diskussion - Die Analysen dieses Beitrags zeigen, dass sich die Bezugsstrukturen für Erdgas in den nächsten zwei Jahrzehnten signifikant verändern werden. Die Förderung in der EU wird deutlich zurückgehen und der Anteil russischen und norwegischen Erdgases sowie von verflüssigtem Erdgas LNG (z.B. aus Algerien und Ägypten) wird zunehmen. Obwohl hierdurch die Emissionssituation potentiell ungünstiger wird, können steigende Emissionen durch die erforderlichen umfangreichen Investitionen teilweise kompensiert werden, weil ältere und ineffizientere Technik durch den aktuellen Stand der Technik ausgetauscht wird. Im Ergebnis werden sich die gegenläufigen Trends in etwa aufheben und die Treibhausgasemissionen der Erdgasbereitstellung - je nach Investitionsumfang - leicht sinken, d.h. bei etwa 12% der direkten Treibhausgasemissionen liegen. Für die beiden hier berechneten Szenarien-Varianten wird eine Senkung der gesamten Vorketten-Emissionen des in Deutschland genutzten Gases von rund 23 Mio. t CO2-Äquivalent (2005) auf 19,5 bzw. 17,6 Mio. t CO2-Äquivalente bis 2030 angenommen. Bei der ersten Variante können trotz steigenden Gasverbrauchs die Emissionen mittels technischer Verbesserungen reduziert werden, während bei der zweiten Variante der erhebliche Rückgang des Gasimports Hauptgrund für die Emissionsreduktion ist.
Schlussfolgerungen - Derzeit liegen die indirekten Treibhausgasemissionen der Erdgasbereitstellung etwa auf dem Niveau der anderen fossilen Energieträger, Öl und Steinkohle. Beim Erdgas wird diese Höhe in den nächsten Jahrzehnten sogar stark absinken, wenn die großen Optimierungspotentiale konsequent umgesetzt werden. Allerdings sind für die Sicherstellung der Erdgasversorgung umfangreiche Investitionen erforderlich. Diese sollten mit der aus Emissionssicht jeweils best verfügbaren - und damit langfristig auch wirtschaftlichsten - Technik erfolgen. Erdgas wird unter diesen Voraussetzungen auch in Zukunft - als relativ sauberer fossiler Energieträger - eine wichtige Übergangsfunktion zur regenerativen Energieversorgung übernehmen können.
In der vorliegenden Arbeit sind die verfügbaren Potenziale an Biomethan auf Basis nachwachsender Rohstoffe in Deutschland mit den ökologischen und ökonomischen Kenndaten (THG-Emissionsfaktoren und Gas-Gestehungskosten) sowohl statisch für das Bezugsjahr 2010 als auch im mittel- bis langfristigen Ausblick untersucht worden (Teilmodell I). Zudem ist ein Abgleich der verschiedenen Einsatzbereiche von Biomethan erfolgt, um vor dem Hintergrund des sich ebenfalls dynamisch entwickelnden Energiesystems zu ermitteln, durch welchen der Nutzungspfade (KWK, Strom, Wärme, Kraftstoff, Ersatz von Erdgas) sich der höchstmögliche Beitrag zum Klimaschutz durch die maximale Einsparung von Treibhausgasen (THG) erzielen lässt (Teilmodell II). Teilmodell 1: Die Produktion von Biogas und Biomethan sollte generell immer nach dem jeweils besten Stand der Technik betrieben werden, um THG-Emissionen etwa durch offene Gärrestlager, zu hohe diffuse Methanemissionen aus dem Fermenter oder Methanverluste bei der Aufbereitung zu vermeiden. Der Anbau der Substrate sollte zudem in regional angepassten Fruchtfolgen erfolgen. Nach dem Stand der Technik (Bezugsjahr 2010) kann Biomethan auf Basis nachwachsender Rohstoffe in großmaßstäblichen, industriell geführten Anlagen mit einem THG-Emissionsfaktor von durchschnittlich rund 84 g CO2Äq/kWh Methan erzeugt werden, wenn Substrate aus regional angepassten Fruchtfolgen verwendet werden. Dieser Wert liegt um rund 20 % höher, als es bei Einsatz von ausschließlich Mais als gängigstem Substrat mit den geringsten THG-Emissionen der Fall wäre. Im Gegensatz zu einer "Monokultur Mais" ist die Erzeugung von Biogassubstraten in regional angepassten Fruchtfolgen aber nicht mit zusätzlichen negativen Folgen im Vergleich zur konventionellen Landwirtschaft verbunden. Die Erzeugung der Substrate ist der Teil der technischen Prozesskette Biomethan, der die meisten THG-Emissionen verursacht. Auf Basis einer eine Technologie-Lernkurve mit dem Lernfaktor FLCA wird abgeschätzt, dass sich der THG-Emissionsfaktor von Biomethan im Ausblick bis 2050 auf rund 40 % des Wertes von 2010 (2030: ca. 56 %) bzw. bis auf 34 g CO2Äq/kWh Methan (2030: 47 g CO2Äq/kWh Methan) reduziert. Ausgehend von einer Einspeisekapazität von 0,25 Mrd.m3 Methan/a in 2010 können in 2050 über 20 Mrd.m3 Methan/a eingespeist werden. Die Mengenziele der Gasnetz-Zugangsverordnung werden mit 2,2 Mrd.m3 Methan/a in 2020 und 6,2 Mrd.m3 Methan/a in 2030 allerdings zunächst verfehlt. Die erheblichen Steigerungen im Ausblick sind dabei unter anderem auf die angenommenen Ertragssteigerungen sowohl der konventionellen Landwirtschaft zur Nahrungs- und Futtermittelproduktion als auch für Energiepflanzen zurückzuführen. Teilmodell 2: Bei der Erzeugung von Biomethan werden zunächst Treibhausgase freigesetzt. Durch den Ersatz von anderen, fossilen Energieträgern kann der Einsatz von Biomethan aber zum Klimaschutz durch THG-Vermeidung beitragen. Dies gilt in unterschiedlichem Maße, abhängig von den ersetzten Referenz-Technologien. Je höher die Emissionen, die durch das Referenzsystem verursacht werden, desto höher ist das Vermeidungspotenzial durch eine emissionsärmere Technik. Die Wahl des Bezugssystems beeinflussen insbesondere im Ausblick das Ergebnis und damit die Einsatzpriorität. Durch geschickte Wahl des Referenzsystems ist es möglich, das Ergebnis der Einsatzpriorität für Biomethan mindestens in seiner Eindeutigkeit zu beeinflussen. In der wissenschaftlichen Debatte ist daher besonderer Wert auf Transparenz der Annahmen zu legen. Das gilt insbesondere für das Zusammenspiel der Strom- und Wärme-Referenz. Der gezielte Einsatz von Biomethan in verschiedenen Sektoren unterscheidet sich deutlich positiv von dem reinen Ersatz von Erdgas als Energieträger. Das schlägt sich auch in den absoluten THG-Minderungen der Mengengerüste bis 2050 nieder: wird das zusätzliche Biomethan in KWK verstromt, können insgesamt rund 733 Mio. t CO2äq an Treibhausgasen über den Betrachtungszeitraum bis 2050 gespart werden, bei reinem Erdgasersatz sind es mit rund 600 Mio. t CO2äq etwa 20 % weniger. Mittelfristig (bis etwa 2030) hat bei konsistentem Ansatz der Einsatz von Biomethan in der KWK die höchste Priorität, da hier die höchsten THG-Minderungen erreicht werden können; an zweiter Stelle steht der Einsatz als Kraftstoff. Sowohl die reine Verstromung ohne Wärmenutzung als auch die reine Wärmenutzung erzielen THG-Vermeidungen in sehr ähnlicher Größenordnung wie der Ersatz des Energieträgers Erdgas durch Biomethan. Langfristig (ab 2030 bis 2050) ist die Einsatzpriorität von KWK und Kraftstoffnutzung vertauscht. Die ungekoppelte Wärmebereitstellung bleibt vor dem Ersatz von Erdgas als Energieträger; die ungekopplte Stromerzeugung ist die schlechteste Option zur THG-Minderung.
Treibhausgasneutralität in Deutschland bis 2045 : ein Szenario aus dem Projekt SCI4climate.NRW
(2023)
Die klimapolitischen Ziele Deutschlands und der EU machen eine sehr schnelle und tiefgreifende Transformation sowohl der Energieversorgung als auch der energieverbrauchenden Sektoren notwendig. Diese Transformationsherausforderung betrifft nicht zuletzt die energieintensive Industrie in Deutschland, die vor grundlegenden technologischen Veränderungen wichtiger Produktionsprozesse steht. Die Herausforderungen für die Industrie werden durch die aktuelle Energiekrise weiter verschärft.
Vor diesem Hintergrund stellt das hier vorgestellte Klimaschutzszenario "SCI4climate.NRW-Klimaneutralität" (S4C-KN), das im Rahmen des vom Land NRW finanzierten Forschungsprojekts "SCI4climate.NRW" entwickelt wurde, die möglichen künftigen Entwicklungen in der energieintensiven Industrie in den Mittelpunkt der Analyse. Das Szenario analysiert diese Entwicklungen im Kontext eines gesamtwirtschaftlichen Transformationspfads hin zu einem klimaneutralen Deutschland im Jahr 2045.
Local implementation projects for sector coupling play an important role in the transformation to a more sustainable energy system. Despite various technical possibilities, there are various barriers to the realisation of local projects. Against this backdrop, we introduce an inter- and transdisciplinary approach to identifying and evaluating different power-to-X paths as well as setting up robust local implementation projects, which account for existing drivers and potential hurdles early on. After developing the approach conceptually, we exemplify our elaborations by applying them to a use case in the German city of Wuppertal. It can be shown that a mix of several interlinked interdisciplinary methods as well as several participatory elements is suitable for triggering a collective, local innovation process. However, the timing and extent of end-user integration remain a balancing act. The paper does not focus on a detailed description of power-to-X (PtX) as a central pillar of the sustainable transformation of the energy system. Rather, it focuses on the innovative methodological approach used to select a suitable use path and design a corresponding business model. The research approach was successfully implemented in the specific case study. However, it also becomes clear that the local-specific consideration entails limitations with regard to the transferability of the research design to other spatial contexts.
Contrary to "static" pathways that are defined once for all, this article deals with the need for policy makers to adopt a dynamic adaptive policy pathway for managing decarbonization over the period of implementation. When choosing a pathway as the most desirable option, it is important to keep in mind that each decarbonization option relies on the implementation of specific policies and instruments. Given structural, effectiveness, and timing uncertainties specific to each policy option, they may fail in delivering the expected outcomes in time. The possibility of diverging from an initial decarbonization trajectory to another one without incurring excessive costs should therefore be a strategic element in the design of an appropriate decarbonization strategy. The article relies on initial experiences in France and Germany on decarbonization planning and implementation to define elements for managing dynamic adjustment issues. Such an adaptive pathway strategy should combine long-lived incentives, like a pre-announced escalating carbon price, to form consistent expectations, as well as adaptive policies to improve overall robustness and resilience. We sketch key elements of a monitoring process based on an ex ante definition of leading indicators that should be assessed regularly and combined with signposts and trigger values at the subsector level.
Accelerating the diffusion of domestic biogas is considered to be a promising option for reaching the goal of universal access to energy by 2030, particularly for the provision of cooking energy for rural populations in developing countries. The aim of this study is to develop a systematic account of the factors that influence the diffusion of domestic biogas technologies. To achieve this objective, a three step analysis approach is applied. In the first step, a conceptual model is built based on insights from scholars that have been studying the diffusion of energy innovations in rural contexts. In the next step, a qualitative content analysis of scientific literature is undertaken to test and refine the categories proposed by the conceptual model and to systematically organise the empirical evidence of the factors that influence the diffusion of domestic biogas in developing and emerging countries. The systemised evidence is used to identify the components and interactions between the household configurations and socio-economic context that determine both the adoption process at household level and the overall technology diffusion. Finally, in the last step, we reflect on the implications of the resultant systematic conceptualisation regarding the purpose and design of programmes promoting the dissemination of domestic biogas technologies.
Große Erzählungen im Engelsjahr 2020 handeln von der Textilindustrie gestern und heute. Die vorliegenden kleinen Erzählungen spielen in anderen textilen Welten und jenseits der großen Fabriken. Von ihnen erzählt Friedrich Engels nicht. Dem Erzählten und Nicht-Erzählten auf der Spur finden wir schließlich heraus, dass auch zu Friedrich Engels selbst in einer bestimmten Weise erzählt - und nicht erzählt wird.
Unvermeidbare Emissionen aus der Abfallbehandlung : Optionen auf dem Weg zur Klimaneutralität
(2022)
Auch die thermische Abfallbehandlung in Deutschland kann zu einem Baustein des klimaneutralen Wirtschaftens werden. Allerdings sind dafür noch verschiedene Voraussetzungen zu schaffen. Technisch sind neben den bereits bekannten weitere innovative Verfahren in der Entwicklung; nicht zu vernachlässigen ist zudem die anspruchsvolle Aufgabe des CO2-Handlings. Hier ist zum einen der Aufbau der benötigten Infrastruktur zu nennen. In Bezug auf die Nutzung des abgetrennten CO2 ist auch die Industrie gefragt, um sektorübergreifende, klimafreundliche Use-Cases und Geschäftsmodelle rund um CCU und die weitmöglichste Schließung von Kohlenstoffkreisläufen zu entwickeln. Entsprechende Regularien und Marktanreize sind politisch zu setzen.
Urban GHG emissions and resource flows : methods for understanding the complex functioning of cities
(2015)
This paper sums up the recent developments in concepts and methods being used to measure the impacts of cities on environmental sustainability. It differentiates between a dominant trend in research literature that concentrates on the accounting and allocation of greenhouse gas (GHG) emissions and energy use to cities, and a re-emergence of studies focusing on the direct and indirect urban material and resource flows. The availability of reliable data and standard protocols is greater in the GHG accounting field and continues to grow rapidly.
Bei der Großen Transformation handelt es sich laut Wissenschaftlichen Beirat Globale Umweltveränderungen (WGBU) um einen ganzheitlichen Wandel des fossilen ökonomischen Systems in Richtung klimaverträglicher Nachhaltigkeit und höherer Lebensqualität. Schon heute lebt mehr als die Hälfte der Menschheit in Städten - in Deutschland sind es über 80 %. In der Transformationsforschung spielen daher Städte eine zentrale Rolle. In Bottrop finden derzeit zwei großangelegte ökologische Transformationsprozesse statt. Zum einen wird die Emscher im Norden der Stadt renaturiert. Der bisher als Abwasserkanal genutzte Fluss erstreckt sich über das gesamte Ruhrgebiet und wird in einer insgesamt 20 Jahre langen Umbauphase zu einem naturnahen Gewässer zurückgeführt. Zum anderem ist Bottrop Gewinner des Wettbewerbs InnovationCity Ruhr. Im Frühjahr 2010 rief der Initiativkreis Ruhr einen Wettbewerb aus, bei dem die Klimastadt der Zukunft gefunden werden sollte. Ziel von InnovationCity Ruhr ist es die CO2-Emmissionen in Bottrop bis 2020 zu halbieren und somit eine Vorbildfunktion zur klimafreundlichen Wandlung für das gesamte Ruhrgebiet einzunehmen. Die erfolgreiche Implementation solcher Transformationsprozesse ist laut WBGU von der Akzeptanz, Legitimation und Partizipation der Bevölkerung abhängig. Diese Forschungsarbeit zeigt mittels einer Methodentriangulation von Interviews mit acht Bottroper Bürgerinnen und Bürger sowie der Anwendung einer Collagenmethode, welche Einstellungen und Präferenzen die Bottroper Bevölkerung in Bezug zum urbanen Leben hat. Dabei steht die Frage im Mittelpunkt: Was bedeutet Lebensqualität für die Bottroper und wie lässt sich diese mit der Großen Transformation vereinbaren? Anschließend werden sowohl Anknüpfungspunkte als auch Interessenkonflikte zu den Transformationsprozessen Emscher-Umbau und InnovationCity Ruhr aufgedeckt. Diese Masterarbeit ist in Zusammenarbeit des Wuppertal Instituts mit der Universität Duisburg Essen im Studiengang "Urbane Kultur Gesellschaft und Raum" entstanden.
Urbane Suffizienz
(2013)
The German Energiewende is a deliberate transformation of an established industrial economy towards a nearly CO2-free energy system accompanied by a phase out of nuclear energy. Its governance requires knowledge on how to steer the transition from the existing status quo to the target situation (transformation knowledge). The energy system is, however, a complex socio-technical system whose dynamics are influenced by behavioural and institutional aspects, which are badly represented by the dominant techno-economic scenario studies. In this paper, we therefore investigate and identify characteristics of model studies that make agent-based modelling supportive for the generation of transformation knowledge for the Energiewende. This is done by reflecting on the experiences gained from four different applications of agent-based models. In particular, we analyse whether the studies have improved our understanding of policies' impacts on the energy system, whether the knowledge derived is useful for practitioners, how valid understanding derived by the studies is, and whether the insights can be used beyond the initial case-studies. We conclude that agent-based modelling has a high potential to generate transformation knowledge, but that the design of projects in which the models are developed and used is of major importance to reap this potential. Well-informed and goal-oriented stakeholder involvement and a strong collaboration between data collection and model development are crucial.
For some time, 3D printing has been a major buzzword of innovation in industrial production. It was considered a game changer concerning the way industrial goods are produced. There were early expectations that it might reduce the material, energy and transport intensity of value chains. However for quite a while, the main real world applications of additive manufacturing (AM) have been some rapid prototyping and the home-based production of toys made from plastics. On this limited basis, any hypotheses regarding likely impacts on industrial energy efficiency appeared to be premature. Notwithstanding the stark contrast between early hype and practical use, the diffusion of AM has evolved to an extent that at least for some applications allows for a preliminary assessment of its likely implications for energy efficiency.
Unlike many cross-cutting energy efficiency technologies, energy use of AM may vary substantially depending on industry considered and material used for processing. Moreover, AM may have much greater repercussions on other stages of value chains than conventional cross-cutting energy efficiency technologies. In case of AM with metals the following potential determinants of energy efficiency come to mind:
- A reduction of material required per unit of product and used during processing;
- Changes in the total number and spatial allocation of certain stages of the value chain; and
- End-use energy efficiency of final products.
At the same time, these various streams of impact on energy efficiency may be important drivers for the diffusion of AM with metals. This contribution takes stock of AM with metals concerning applications and processes used as well as early evidence on impacts on energy efficiency and combine this into a systematic overview. It builds on relevant literature and a case study on Wire Arc Additive Manufacturing performed within the REINVENT project.