Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
Document Type
- Peer-Reviewed Article (35)
- Report (33)
- Contribution to Periodical (13)
- Part of a Book (12)
- Conference Object (11)
- Working Paper (4)
- Book (2)
- Habilitation (1)
Für die Umsetzung der Energiewende und speziell den Ausbau erneuerbarer Energien sind nicht nur energiewirtschaftliche oder Klimaschutz-Kriterien maßgeblich. Zu einer umfassenden Nachhaltigkeitsbewertung gehört unter anderem auch die Ressourcenbewertung. Hier ist unstrittig, dass die Gesamt-Ressourceninanspruchnahme eines Energiesystems generell erheblich niedriger ist, wenn dieses nicht auf fossilen, sondern auf erneuerbaren Energien basiert (und dabei nicht hauptsächlich auf Biomasse ausgerichtet ist). Bisher wurde jedoch insbesondere der Verbrauch und die langfristige Verfügbarkeit der mineralischen Rohstoffe, die in der Regel zur Herstellung von Energiewandlern und Infrastruktur benötigt werden, wenig untersucht.
Im Rahmen des Projekts KRESSE wurde daher erstmals analysiert, welche "kritischen" mineralischen Rohstoffe für die Herstellung von Technologien, die Strom, Wärme und Kraftstoffe aus erneuerbaren Energien erzeugen, bei einer zeitlichen Perspektive bis zum Jahr 2050 in Deutschland relevant sind. Die Einschätzung als "kritisch" umfasst dabei die langfristige Verfügbarkeit der identifizierten Rohstoffe, die Versorgungssituation, die Recyclingfähigkeit und die Umweltbedingungen der Förderung. Die Studie macht deutlich, dass die geologische Verfügbarkeit mineralischer Rohstoffe für den geplanten Ausbau der erneuerbaren Energien in Deutschland grundsätzlich keine limitierende Größe darstellt. Dabei kann jedoch möglicherweise nicht jede Technologievariante unbeschränkt zum Einsatz kommen.
The transformation processes towards a sustainable development are complex. How can science contribute towards new solutions and ideas leading to change in practice? The authors of this book discuss these questions along the energy transition in the building sector.
A transformative research that leaves the neutral observer position needs appropriate concepts and methods: how can knowledge from different disciplines and from practice be integrated in order to be able to explain and understand complex circumstances and interrelations? What role do complex (agent-based) models and experiments play in this respect? Which mix of methods is required in transformative science in order to actively support the actors in transformation processes?
Theses questions are illustrated by the example of the BMBF funded project "EnerTransRuhr".
The main objective of this article is to evaluate CO2 mitigation potential and to calculate costs avoided by the use of different CO2 mitigation technologies in China's cement sector, namely energy efficiency improvements, use of alternative fuels, clinker substitution and carbon capture and storage (CCS). Three scenarios are designed based on the projection of cement output and technology development over the next 40 years (2010–2050). 2.5, 4.7 and 4.3 Gt tonnes of CO2 will be saved totally in basic scenario and two low carbon scenarios up to 2050. By comparing these technologies along the scenarios, it can be concluded that CO2 emissions can mainly be reduced by energy efficiency improvements and use of alternative fuels. Clinker substitution, which reduces the clinker-to-cement ratio as well as energy intensity, results in significant cost advantages. CCS, including post-combustion capture and oxy-fuel combustion capture, could play an important role in the capture of CO2 in the cement industry, and is expected to be in commercial use by 2030.
The study presents the results of an integrated assessment of carbon capture and storage (CCS) in the power plant sector in Germany, with special emphasis on the competition with renewable energy technologies. Assessment dimensions comprise technical, economic and environmental aspects, long-term scenario analysis, the role of stakeholders and public acceptance and regulatory issues. The results lead to the overall conclusion that there might not necessarily be a need to focus additionally on CCS in the power plant sector. Even in case of ambitious climate protection targets, current energy policy priorities (expansion of renewable energies and combined heat and power plants as well as enhanced energy productivity) result in a limited demand for CCS. In case that the large energy saving potential aimed for can only partly be implemented, the rising gap in CO2 reduction could only be closed by setting up a CCS-maximum strategy. In this case, up to 22% (41 GW) of the totally installed load in 2050 could be based on CCS. Assuming a more realistic scenario variant applying CCS to only 20 GW or lower would not be sufficient to reach the envisaged climate targets in the electricity sector. Furthermore, the growing public opposition against CO2 storage projects appears as a key barrier, supplemented by major uncertainties concerning the estimation of storage potentials, the long-term cost development as well as the environmental burdens which abound when applying a life-cycle approach. However, recently, alternative applications are being increasingly considered–that is the capture of CO2 at industrial point sources and biomass based energy production (electricity, heat and fuels) where assessment studies for exploring the potentials, limits and requirements for commercial use are missing so far. Globally, CCS at power plants might be an important climate protection technology: coal-consuming countries such as China and India are increasingly moving centre stage into the debate. Here, similar investigations on the development and the integration of both, CCS and renewable energies, into the individual energy system structures of such countries would be reasonable.
If the current energy policy priorities are retained, there may be no need to focus additionally on carbon capture and storage (CCS) in the power plant sector of Germany. This applies even in the case of ambitious climate protection targets, according to the results of the presented integrated assessment study. These cover a variety of aspects: Firstly, the technology is not expected to become available on a large scale in Germany before 2025. Secondly, if renewable energies and combined heat and power are expanded further and energy productivity is enhanced, there is likely to be only a limited demand for CCS power plants, as a scenario analysis of CCS deployment in Germany shows. Thirdly, cost analysis using the learning curve approach shows that the electricity generation costs of renewable electricity approach those of CCS power plants. This leads to the consequence that, from 2020, several renewable technologies may well be in a position to offer electricity at a cheaper rate than CCS power plants. In addition, a review of new life cycle assessments for CO2 separation in the power plant sector indicates that the greenhouse gas emissions from 1 kW h of electricity generated by first-generation CCS power plants could only be reduced by 68 % to 87 % (95 % in individual cases). Finally, a cautious, conservative estimate of the effective German CO2 storage capacity of approximately 5 billion tonnes of CO2 is calculated, including a fluctuation range yielding values between 4 and 15 billion tonnes of CO2. Therefore, the total CO2 emissions caused by large point sources in Germany could be stored for 12 years (basic value) or for 8 or 33 years (sensitivity values).
This article presents an integrated assessment conducted in order to explore whether carbon capture and storage (CCS) could be a viable technological option for significantly reducing future CO2 emissions in South Africa. The methodological approach covers a commercial availability analysis, an analysis of the long-term usable CO2 storage potential (based on storage capacity assessment, energy scenario analysis and source-sink matching), an economic and ecological assessment and a stakeholder analysis. The findings show, that a reliable storage capacity assessment is needed, since only rough figures concerning the effective capacity currently exist. Further constraints on the fast deployment of CCS may be the delayed commercial availability of CCS, significant barriers to increasing the economic viability of CCS, an expected net maximum reduction rate of the power plant's greenhouse gas emissions of 67%-72%, an increase in other environmental and social impacts, and low public awareness of CCS. One precondition for opting for CCS would be to find robust solutions to these constraints, taking into account that CCS could potentially conflict with other important policy objectives, such as affordable electricity rates to give the whole population access to electricity.
Green hydrogen and synthetic fuels are increasingly recognized as a key strategic element for the progress of the global energy transition. The Middle East and North Africa (MENA) region, with its large wind and solar potential, is well positioned to generate renewable energy at low cost for the production of green hydrogen and synthetic fuels, and is therefore considered as a potential future producer and exporter. Yet, while solar and wind energy potentials are essential, other factors are expected to play an equally important role for the development of green hydrogen and synthetic fuels (export) sectors. This includes, in particular, adequate industrial capacities and infrastructures. These preconditions vary from country to country, and while they have been often mentioned in the discussion on green hydrogen exports, they have only been examined to a limited extent. This paper employs a case study approach to assess the existing infrastructural and industrial conditions in Jordan, Morocco, and Oman for the development of a green hydrogen and downstream synthetic fuel (export) sector.
Il Wuppertal Institute ha condotto uno studio per valutare quali materiali sono da considerare critici in relazione al previsto incremento di energie rinnovabili in Germania. I problemi relativi a materiali come terre rare e vanadio riguardano la dipendenza da pochi paesi fornitori e gli usi competitivi.
The development of digital technologies is accelerating, enabling increasingly profound changes in increasingly short time periods. The changes affect almost all areas of the economy as well as society. The energy sector has already seen some effects of digitalization, but more drastic changes are expected in the next decades. Besides the very positive impacts on costs, system stability, and environmental effects, potential obstacles and risks need to be addressed to ensure that advantages can be exploited while adverse effects are avoided. A good understanding of available and future digital applications from different stakeholders' perspectives is necessary. This study proposes a framework for the holistic evaluation of digital applications in the energy sector. The framework consists of a combination of well-established methods, namely the multi-criteria analysis (MCA), the life cycle assessment (LCA), and expert interviews. The objective is to create transparency on benefits, obstacles, and risks as a basis for societal and political discussions and to supply the necessary information for the sustainable development and implementation of digital applications. The novelty of the proposed framework is the specific combination of the three methods and its setup to enable sound applicability to the wide variety of digital applications in the energy sector. The framework is tested subsequently on the example of the German smart meter roll-out. The results reveal that, on the one hand, the smart meter roll-out clearly offers the potential to increase the system stability and decrease the carbon emission intensity of the energy system. Therefore, the overall evaluation from an environmental perspective is positive. However, on the other hand, close attention needs to be paid to the required implementation and operational effort, the IT (information technology) and data security, the added value for the user, the social acceptance, and the realization of energy savings. Therefore, the energy utility perspective in particular results in an overall negative evaluation. Several areas with a need for action are identified. Overall, the proposed framework proves to be suitable for the holistic evaluation of this digital application.
Transponder-based Aircraft Detection Lighting Systems (ADLS) are increasingly used in wind turbines to limit beacon operation times, reduce light emissions, and increase wind energy acceptance. The systems use digital technologies such as receivers of digital transponder signals, LTE/5G, and other information and communication technology. The use of ADLS will be mandatory in Germany both for new and existing wind turbines with a height of >100 m from 2023 (onshore) and 2024 (offshore), so a nationwide rollout is expected to start during 2022. To fully realize the benefits while avoiding risks and bottlenecks, a thorough and holistic understanding of the efforts required and the impacts caused along the life cycle of an ADLS is essential. Therefore, this study presents the first multi-aspect holistic evaluation of an ADLS. A framework for evaluating digital applications in the energy sector, previously developed by the authors, is refined and applied. The framework is based on multi-criteria analysis (MCA), life cycle assessment (LCA), and expert interviews. On an aggregated level, the MCA results show an overall positive impact from all stakeholders’ perspectives. Most positive impacts are found in the society and politics category, while most negative impacts are of technical nature. The LCA of the ADLS reveals a slightly negative impact, but this impact is negligible when compared to the total life cycle impact of the wind turbines of which the ADLS is a part. Besides the aggregated evaluation, detailed information on potential implementation risks, bottlenecks, and levers for life cycle improvement are presented. In particular, the worldwide scarcity of the required semiconductors, in combination with the general lack of technicians in Germany, lead to the authors’ recommendation for a limited prolongation of the planned rollout period. This period should be used by decision-makers to ensure the availability of technical components and installation capacities. A pooling of ADLS installations in larger regions could improve plannability for manufacturers and installers. Furthermore, an ADLS implementation in other countries could be supported by an early holistic evaluation using the presented framework.
Carbon capture and storage (CCS) might be an important climate protection technology for coal-rich countries. This paper presents first results of a systemic and long-term analysis of a future CCS implementation in India. It focuses on potential storage formations in the geological subsurface and the geographic match of these sinks with CO2 emissions of current and future largepoint power plants. The analysis is framed by an overview on India’s position on CCS, ongoing Indian research and development projects as well as its international activities.
The geological potential for CO2 sequestration in India is subject to large uncertainty because, so far, only few studies estimated it in a vague manner. A first meta-analysis shows that there is a huge variation between 48 Gt and 572 Gt of CO2. The main differences between the evaluated studies are the assumed capacities for deep saline aquifers and basalt formations. Taking the ongoing discussion and the existing uncertainties into account, the storage potential might be provided only by aquifers (in the range of 44 to 360 Gt of CO2) and hydrocarbon fields (2 to 7 Gt of CO2).
The amount of CO2 emissions possibly available for sequestration is assessed by applying three substantially different long-term energy scenarios for India. These scenarios, indicating pathways between a "low carbon" and a "high carbon" development until 2050, result in cumulated CO2 emissions between 30 and 171 Gt if all new large-scaled power plants will be based on CCS from 2020 on. Compared with the sink capacities, only the CO2 emissions of scenario S2 (30 Gt) could theoretically be stored with high certainty. Considering the scenarios S3 and S1, their CO2 emissions (94 Gt and 171 Gt, respectively) could only be sequestered if the aquifer capacity would prove to be usable. Geological storage sites do not appear to be located close to sources in South West, Central, North and North East India. This first rough analysis means that only those CO2 emissions occurring in the Western parts of North and West India, the Eastern part of South India as well as the South part of East India might be suited for sequestration nearby.
A more detailed source-sink matching will follow in the next phase of the project, including results of expert meetings in India. Furthermore, this analysis will be complemented by an additional assessment from economic, ecological and resource-strategic points of view, which might further affect the potential for CCS.
Innerhalb des Projekts TFE-NRW bewertete das Wuppertal Institut den Forschungsbedarf für Energiewende-Technologien in Nordrhein-Westfalen. Ziel war es herauszufinden, welche Technologien und Forschungsbereiche im Rahmen der Energieforschung für Nordrhein-Westfalen (NRW) einen besonders hohen Stellenwert in Relation zur Bewertung für Deutschland haben könnten und für die eine besondere Unterstützung innerhalb der Energieforschung gerechtfertigt erscheint. Dabei sollten die speziellen Anforderungen des Bundeslandes berücksichtigt werden.
Betrachtet wurden 31 Technologiefelder aus den Bereichen erneuerbare Energien, konventionelle Kraftwerke, Infrastruktur, Technologien für die Sektorenkopplung (Power-to-X, P2X), energie- und ressourceneffiziente Gebäude, Energie- und Ressourceneffizienz in der Industrie und integrative Aspekte, die mithilfe eines Kriterienrasters qualitativ bewertet wurden.
This study provides insight into the feasibility of a CO2 trunkline from the Netherlands to the Utsira formation in the Norwegian part of the North Sea, which is a large geological storage reservoir for CO2. The feasibility is investigated in competition with CO2 storage in onshore and near-offshore sinks in the Netherlands. Least-cost modelling with a MARKAL model in combination with ArcGIS was used to assess the cost-effectiveness of the trunkline as part of aDutch greenhouse gas emission reduction strategy for the Dutch electricity sector and CO2 intensive industry. The results show that under the condition that a CO2 permit price increases from €25 per tCO2 in 2010 to €60 per tCO2 in 2030, and remains at this level up to 2050, CO2 emissions in the Netherlands could reduce with 67% in 2050 compared to 1990, and investment in the Utsira trunkline may be cost-effective from 2020–2030 provided that Belgian and German CO2 is transported and stored via the Netherlands as well. In this case, by 2050 more than 2.1 GtCO2 would have been transported from the Netherlands to the Utsira formation. However, if the Utsira trunkline is not used for transportation of CO2 from Belgium and Germany, it may become cost-effective 10 years later, and less than 1.3 GtCO2 from the Netherlands would have been stored in the Utsiraformation by 2050. On the short term, CO2 storage in Dutch fields appears more cost-effective than in the Utsira formation, but as yet there are major uncertainties related to the timing and effective exploitation of the Dutch offshore storage opportunities.
Facing the uncertainty of CO2 storage capacity in China by developing different storage scenarios
(2016)
China is very active in the research and development of CO2 capture and storage technologies (CCS). However, existing estimates for CO2 storage capacity are very uncertain. This uncertainty is due to limited geological knowledge, a lack of large-scale research on CO2 injection, and different assessment approaches and parameter settings. Hence storage scenarios represent a method that can be used by policy makers to demonstrate the range of possible storage capacity developments, to help interpret uncertain results and to identify the limitations of existing assessments. In this paper, three storage scenarios are developed for China by evaluating China-wide studies supplemented with more detailed site- and basin-specific assessments. It is estimated that the greatest storage potential can be found in deep saline aquifers. Oil and gas fields may also be used. Coal seams are only included in the highest storage scenario. In total, the scenarios presented demonstrate that China has an effective storage capacity of between 65 and 1551 Gt of CO2. Furthermore, the authors emphasise a need for action to harmonise storage capacity assessment approaches due to the uncertainties involved in the capacity assessments analysed in this study.
In the Paris Accord to the UN Climate Change Conference COP21 in 2015, the international community agreed to "make every effort" to reach a significant reduction in greenhouse gas (GHG) emissions and to limit global average temperature rise to preferably 1.5°C by 2100 (UNFCC 2018). A transition to a climate-friendly energy supply, however, would come largely at the expense of coal - a fossil fuel with large global reserves that are also widely dispersed regionally. Therefore, especially since the turn of the millennium, the question has been raised as to how coal could be used in a climate-friendly way in the future. So far, the only way to do this is to apply CCS technology or CCU. CCS involves the capture of carbon dioxide (CO2) emissions from fossil fuel-fired power plants or industrial sources and its storage underground, such as in deep saline aquifers or in depleted oil and natural gas fields, or their use for enhanced oil or gas recovery (EOR/EGR). When carbon capture and utilisation (CCU) is applied, the CO2 is further used, for example as feedstock for the production of durable plastics. Due to the relatively low potential of CCU compared to CCS (IPCC 2005), only CCS is considered in this thesis.
The majority of studies and roadmaps have discussed CCS as a technology option that could make a significant contribution to achieving the objective of decreasing GHG emissions for many years (IPCC 2014a, 2018). Particularly in the power sector, however, these expectations have not yet been met. As of November 2019, worldwide only two small base-load power plants, capturing a total of 2.4 Mt CO2/year and mainly using it for EOR, are in operation, together with a few pilots in industrial applications and, in particular, natural gas processing (in total 30 Mt CO2/year) (Global CCS Institute 2019).
Early on, it became clear that the predicted high deployment targets and their underlying studies should be critically questioned for various reasons. Particularly due to the lack of a systems-analytical evaluation of this technology (which was relatively new at the time), no reliable answers could be given about the ecological, economic, social and structural effects of its large-scale application. Such analyses are, however, a pre-condition for comprehensively classifying the contribution of a new technology as a promising option for a sustainable energy supply system and assessing it in comparison to other technologies.
To address these challenges, several studies, most of which initiated by the author, were conducted on this topic between 2004 and 2018. The resulting papers became the basis for this thesis.
Als Direct Air Capture (DAC) werden Technologien zur Abscheidung von Kohlendioxid aus der Atmosphäre bezeichnet. Diese könnten zunehmend zum Einsatz kommen, um CO2 für Power-to-X-Prozesse (PtX) oder zur Erzielung "negativer Emissionen" bereitzustellen. Die Ergebnisse einer multidimensionalen Bewertung im Rahmen der BMWi-Studie "Technologien für die Energiewende" (et 09/2018) zeigen, dass noch große Unsicherheiten bestehen und die Entwicklung überwiegend an Deutschland vorbeigeht.
Considering the traditional coal-based energy infrastructure in the German state North Rhine-Westphalia the question arises how to face the needs of embanking climate change. To reduce greenhouse gas intensive electricity generation in the Ruhr area, the introduction of carbon capture and storage (CCS) is an option of particular relevance. The paper investigates and discusses possibilities of setting up a CCS infrastructure in NRW. It shall clarify whether, and possibly how, highly efficient conventional fossil fired power plants could be refitted with CO2 capture to flexibly react to potentially changing climate policy conditions and to keep up with the market.
Several energy scenario studies consider concentrated solar power (CSP) plants as an important technology option to reduce the world's CO2 emissions to a level required for not letting the global average temperature exceed a threshold of 2–2.4 °C. A global ramp up of CSP technologies offers great economic opportunities for technology providers as CSP technologies include highly specialised components. This paper analyses possible value creation effects resulting from a global deployment of CSP until 2050 as projected in scenarios of the International Energy Agency (IEA) and Greenpeace International. The analysis focuses on the economic opportunities of German technology providers since companies such as Schott Solar, Flabeg or Solar Millennium are among the leading suppliers of CSP technologies on the global market.
For parabolic trough power plants using synthetic oil as the heat transfer medium, the application of solid media sensible heat storage is an attractive option in terms of investment and maintenance costs. One important aspect in storage development is the storage integration into the power plant. A modular operation concept for thermal storage systems was previously suggested by DLR, showing an increase in storage capacity of more than 100 %. However, in these investigations, the additional costs needed to implement this storage concept into the power plant, like for extra piping, valves, pumps and control had not been considered. These aspects are discussed in this paper, showing a decrease of levelized energy costs with modular storage integration of 2 to 3 %. In a Life Cycle Assessment (LCA) a comparison of an AndaSol-I type solar thermal power plant [1] with the original two-tank molten salt storage and with a "hypothetical" concrete storage shows an advantage of the concrete storage technology concerning environmental impacts. The environmental impacts of the “hypothetical” concrete based AndaSol-I decrease by 7 %, considering 1 kWh of solar electricity delivered to the grid. Regarding only the production of the power plant, the emissions decrease by 9.5 %.
Um den Klimawandel begrenzen zu können, wird zunehmend der Einsatz von Direct Air Capture (DAC) zur Erzeugung von Negativemissionen diskutiert. Anhand von Kosten sowie dem Flächen-, Wasser- und Energieverbrauch werden in diesem Artikel mögliche Implementierungspfade der DAC-Technologie, aufbauend auf einem bestehenden Klimaneutralitätsszenario für Deutschland, analysiert. Während die technische Realisierung machbar sein sollte, stellt der hohe Flächen- und Energiebedarf eine kritische Größe dar.
Direct Air Capture (DAC) is increasingly being discussed as a possibility to limit climate change. In this study, a possible rollout of the DAC technology at German coastal areas is analysed based on an existing climate neutrality scenario. For the year 2045 the resulting costs as well as land, water and energy consumption are examined. It is concluded that a realization of the DAC technology in Germany might be possible from a technical point of view. However, there is a high demand for land and energy. Since a rollout is needed to start in 20 years at the latest, the required discussion and evaluation should be initiated as quickly as possible.
One of the factors decelerating a further diffusion of the carbon capture and storage (CCS) technology is the public's negative perception of early pilot or demonstration activities in Germany as well as in other countries. This study examined the public perception of CCS in more detail by looking into different options within the CCS chain, i.e. for the three elements capture, transport and storage. This was analyzed using an experimental approach, realized in an online survey with a representative German sample of 1830 citizens. Each participant evaluated one of 18 different CCS scenarios created using three types of CO2 source (industry, biomass, coal), two transport options (pipeline vs. no specification), and three storage possibilities (saline aquifer, depleted gas field, enhanced gas recovery (EGR)).
Overall, we found that the ratings of CCS were neutral on average. However, if the CO2 is produced by a biomass power plant or industry, CCS is rated more positively than in a scenario with a coal-fired power plant. The specifications of transport and storage interacted with each other such that scenarios including EGR or a depleted gas field without mentioning a pipeline were evaluated better than storing it in a saline aquifer or a depleted gas field and mentioning a pipeline as means of transport. Exploratory regression analyses indicate the high relevance of the respective CO2 source in general as well as the perceived importance of this source for Germany.
One of the main objectives of impact assessments is to identify potentially significant impacts. However, determining this significance has received very limited attention as a procedural step in social impact assessments. Consequently, only limited research and documentation exists on approaches, survey tools and evaluation methods, especially with regard to participatory approaches and combined participatory-technical approaches. This study aims to address this research gap by developing and applying a joined participatory and technical impact significance evaluation. The approach is applied in a case study which analysed the livelihood impacts of the large-scale concentrated solar power plant NOORO I in Ouarzazate, Morocco.
The analysis shows that although different approaches and significance criteria must be applied when involving both local stakeholders and experts, the linked analysis offers more robust results and an improved basis for decision-making. Furthermore, it was observed in the case study that impacts affecting the social, cultural and political spheres were more often considered significant than impacts affecting the physical and material livelihood dimensions. Regarding sustainability assessments of large-scale renewable energy plants, these findings underline the importance (as for other large-scale infrastructure developments) of placing greater emphasis on the inclusion of social aspects in impact assessments.
Ende Dezember 2008 wurde im Europäischen Parlament die "Richtlinie über die geologische Speicherung von CO2" (auch als CCS-Richtlinie bezeichnet) verabschiedet, die eine Schlüsselrolle für die Entwicklung und die Umsetzung von Projekten der CO2-Abscheidung und -Speicherung (CCS) spielt. Der Artikel erläutert den Zusammenhang der CCS-Richtlinie mit dem Energie- und Klimapaket der EU, stellt die wesentlichen Inhalte der Richtlinie vor, zeigt die energiewirtschaftlichen Implikationen auf und arbeitet heraus, welche Regelungen zur Umsetzung der Richtlinie nun vom deutschen Gesetzgeber erfolgen müssen.
This report was prepared by the Wuppertal Institute in cooperation with the German Economic Institute as part of the SCI4climate.NRW project. The report aims to shed light on the possible phenomenon that the availability and costs of "green" energy sources may become a relevant location factor for basic materials produced in a climate-neutral manner in the future.
For this purpose, we introduce the term "Renewables Pull". We define Renewables Pull as the initially hypothetical phenomenon of a shift of industrial production from one region to another as a result of different marginal costs of renewable energies (or of secondary energy sources or feedstocks based on renewable energies).
Shifts in industrial production in the sense of Renewables Pull can in principle be caused by differences in the stringency of climate policies in different countries, as in the case of Carbon Leakage. Unlike Carbon Leakage, however, Renewables Pull can also occur if similarly ambitious climate policies are implemented in different countries. This is because Renewables Pull is primarily determined by differences in the costs and availability of renewable energies. In addition, Renewables Pull can also be triggered by cost reductions of renewable energies and by changing preferences on the demand side towards climate-friendly products. Another important difference to Carbon Leakage is that the Renewables Pull effect does not necessarily counteract climate policy.
Similar to Carbon Leakage, it is to be expected that Renewables Pull could become relevant primarily for very energy-intensive products in basic materials industries. In these sectors (e.g. in the steel or chemical industry), there is also the possibility that relocations of specific energy-intensive parts of the production process could trigger domino effects. As a result, large parts of the value chains previously existing in a country or region could also be subjected to an (indirect) Renewables Pull effect.
For the federal state of NRW, in which the basic materials industry plays an important role, the possible emergence of Renewables Pull is associated with significant challenges as climate policy in Germany, the EU and also worldwide is expected to become more ambitious in the future.
This report aims to enable and initiate a deeper analysis of the potential future developments and challenges associated with the Renewables Pull effect. Thus, in the final chapter of the report, several research questions are formulated that can be answered in the further course of the SCI4climate.NRW project as well as in other research projects.
Especially in the arid areas of the Middle East and North Africa (MENA), water availability plays an important role in the expansion planning of industrial-scale solar power plants. Although power plants may account for only a very small portion of local water demand, competition for water with other sectors is expected to increase when water resources are insufficient for meeting local needs. This can lead to conflicts between different users (such as communities, farmers, tourism, businesses and utilities). Despite the increasing attention on the water-energy nexus, comprehensive studies analysing the interdependencies and potential conflicts between energy and water at the local level are absent.
To examine the linkages between water resources and energy technologies at the local level, this case study was selected because Morocco is one of the countries most affected by water scarcity and, at the same time, it is also one of the most promising countries in North Africa for the development of renewable energies and offers excellent conditions for solar and wind power plants. Nevertheless, the country's electricity system is still largely based on conventional energy sources, and the country is more than 95% dependent on energy imports. To strengthen the country's energy security and reduce the financial burden associated with energy imports, Morocco is pursuing an ambitious renewable energy expansion strategy: by 2020, around 42% of the national electricity demand should be met by renewable energies. In view of Morocco's ambitious plans, it is particularly important to identify the potential conflicts and synergies resulting from the expansion of renewable energies in relation to the water sector.
For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72-90% and total greenhouse gas reduction by 65-79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
Carbon capture and storage
(2009)