Refine
Year of Publication
Document Type
- Conference Object (59)
- Report (48)
- Peer-Reviewed Article (16)
- Working Paper (8)
- Part of a Book (7)
- Contribution to Periodical (2)
Language
- English (140) (remove)
Conventional new buildings in OECD countries with a history of building codes save about 50 % of energy compared to average buildings in the building stock. This improvement, however, is not enough to create a building standard with low lifetime costs nor to reach long-term climate protection targets. Much higher energy savings can already be achieved through proven high-efficiency building concepts bringing net economic benefits among other advantages.
A strategic approach to integrated building design is the key to achieving these high-energy savings at low or no extra cost in residential buildings. In our paper we describe the "Easy Efficiency Approach", which can reduce primary energy consumption by 40 to 60 % compared to conventional new building standards, or by 70% to 80% when compared to the primary energy consumption of the existing building stock, and should be regarded as the minimum. This strategy focuses on low-cost options, mainly passive options. Although it can already significantly reduce energy consumption, this first step will not be sufficient to reach long-term climate protection goals. It is thus necessary to implement and support what we call an "Advanced Efficiency Approach", with savings up to 90% , as compared to new building standards, as soon as possible to avoid lock-in effects. Further improvements, especially through the active use of renewable energies, reduce the net primary energy demand to 0 % and beyond.
According to the chosen strategy clearly defined energy performance ranges, with reference to possible savings, for different climate zones worldwide are given. In verifying this approach simulations with BAT (Best Available Technologies) buildings of different types (single family, multi family, high rise) were carried out in close cooperation with project partners. This data has also been verified through an empirical database of built examples both for energy consumption as well their economic soundness.
The efficiency strategy to exploit the potential for energy savings in buildings still is applied rather slowly in most countries. In addition, there are indications that energy savings are partly compensated particularly by wealth but also rebound effects, the "empty nest" (persistence of elderly people and couples in family homes), and cohort effects (e.g. vintages of people or buildings). In Germany, as in other European countries, the existing trend in housing is a continuously growing floor space per capita. Over the last decades it expanded from about 20 m2 in 1960 to currently 45 m2 per person. Forecasts expect a further increase to more than 50 m2 per person. Obviously, more floor space needs more energy for space heating and cooling, ventilation, and lighting, but it also allows the household to operate more and or bigger appliances, all of which increase energy consumption.
On the other hand, housing projects emerge offering relatively small private living spaces in combination with various shared spaces to use. Many of them are based on private initiatives. But what is the motivation behind it? And is there a higher need for new living concepts in the future?
The proposed paper presents main drivers of increasing floor space per capita in Germany and discusses the question if more space is necessary for higher comfort. It presents different examples of housing concepts that strive to achieve good living with less space and suggests a "building typology of sufficiency".
Finally, the paper discusses qualitatively to which extent these housing concepts can lead to less energy use and emissions. In this way sufficiency could be best friend with efficiency and tackle wealth, rebound, and other effects that counter-act efficiency progress. But therefore, as the paper concludes, politics and policies should recognise sufficiency as a field of action instead of referring to individual decisions and lifestyles.
Energy Efficiency First (EEF) is an established principle for European Union (EU) energy policy design. It highlights the exploitation of demand-side resources and prioritizes cost-effective options from the demand-side over other options from a societal cost-benefit perspective. However, the involvement of multiple decision-makers makes it difficult to implement. Therefore, we propose a flexible decision-tree framework for applying the EEF principle based on a review of relevant areas and examples. In summary, this paper contributes to applying the EEF principle by defining and distinguishing different types of cases - (1) policy-making, and (2) system planning and investment - identifying the most common elements, and proposing a decision-tree framework that can be flexibly constructed based on the elements for different cases. Finally, we exemplify the application of this framework with two example cases: (1) planning for demand-response in the power sector, and (2) planning for a district heating system.
On 26 January 2019, the Commission on Growth, Structural Change and Employment recommended that no more coal-fired power plants would be operated in Germany by 2038 at the latest. In this paper the Wuppertal Institute comments on the results of the Commission and makes recommendations for the current necessary steps for the climate and innovation policy in Europe, Germany and North Rhine-Westphalia.
The paper presents the results of an ex-ante evaluation of the economy-wide benefits that may be achieved through the implementation of the 20-year Energy Efficiency Action Plan (EEAP) in Thailand. The objective of the EEAP is to reduce energy intensity by 25 % in 2030 compared to 2010. This is to be reached by reducing the projected energy consumption by 20 % or 38 Mtoe until 2030. We have specified an analytical framework, which allows for a calculation of the overall energy cost savings, energy import cost reductions and reduced CO2 emissions. Moreover, we calculated the induced energy efficiency investments, employment effects and impacts on governmental budget. The evaluation shows that an effective implementation of the plan may lead to a reduction in energy expenditure of 37.7 billion EUR by 2030. Moreover, the EEAP-induced energy savings will significantly reduce the greenhouse gas emissions as well as Thailand’s energy import costs and generate private investment in energy efficiency of about 5 billion EUR annually in 2030, which in turn may lead to about 300,000 new jobs. The size of the net impact of the plan on Thailand’s governmental budget is uncertain due to positive and negative effects on corporate and income tax revenues, expenses for unemployment benefits, governmental energy consumption, expenses for energy subsidies and energy tax income.
Bridging the data gap
(2004)
In Germany, the number of renewable energy prosumers has increased rapidly since 2000. However, the development of prosumers has faced and will continue to face various economic, social, and technological challenges, which have triggered the emergence of a number of innovative business models (BM). This paper enriches the empirical basis for prosumer-oriented BMs by investigating two BM innovations in Germany (P2P electricity trading and aggregation of small-size prosumers) drawing on business model and socio-technical transition theories. A mix of qualitative data collection methods, including document analysis and semi-structured expert interviews, was applied. We found that while both BMs can potentially address the challenges associated with renewable energy prosumer development in Germany, small-scale prosumers’ participation in both BMs has been limited so far. We identified various internal and external drivers and barriers for scaling up these BMs for prosumer development in Germany. Despite these barriers, both aggregation and centralized P2P targeting prosumers may potentially be also taken up by incumbent market actors such as utilities. Decentralized P2P on the other hand still faces significant internal and external barriers for upscaling. Based on the analysis, the paper provides policy recommendations with respect to the identified drivers and barriers. From a theoretical perspective, our findings provide further evidence to challenge the dichotomous understanding of niche actors and incumbents, the latter of which are often theorized to be resistant to radical innovations.
What are the best policies and measures to stimulate energy efficiency in buildings? The debate around this is at least as diverse as the markets and concepts for energy efficiency in buildings, and often quite controversial. However, no magic formula seems to have been found so far. It is, therefore, time to address the question in a new way - by combining both theoretical evidence on what policy support markets need, and empirical evidence on which combinations or packages of policies have worked.
In the context of its new four-year project bigEE - "Bridging the Information Gap on Energy Efficiency in Buildings", the Wuppertal Institute is implementing this new approach. The bigEE project aims at developing an international internet-based knowledge platform for energy efficiency in buildings. Hence, it must provide evidence-based information. On the theoretical side, the analysis starts with value chains in the building sector and the barriers but also actor-inherent incentives that the different types of market participants face. This enables to identify, which policies and measures need to be combined to jointly overcome the barriers and strengthen the incentives. On the empirical side, model examples of good practice are collected and compared. The search for these is guided by the results of the theoretical analysis, international expert opinion, and existing databases and platforms. In order to identify what is "good practice", the project uses a newly developed multi-criteria assessment scheme. Finally, the impacts achieved with the model examples, lessons learned, and their transferability will be used to validate the model policy package identified in the theoretical analysis.
The public launch of the bigEE platform is planned for autumn of 2011; eceee Summer Study participants will get a first glance at its content through this paper. The paper presents the methods and tools used and showcases their application for the case of new buildings
This paper presents the evaluation of a regional energy efficiency programme implemented in two "départements" of France. Électricité de France (EDF), a French energy company, provides refurbishment advice and financial incentives to end-users in the residential sector as well as specific training courses and certification to local installation contractors and building firms. Refurbishment measures analysed in this paper are efficient space heating equipment (condensing boilers, heat pumps and wood stoves or boilers), solar water heating systems and the installation of double-glazed windows. A billing analysis based on a survey of programme participants' energy consumption is used to calculate the energy savings attributed to the programme. In order to receive an economic feedback of this demonstration programme, the evaluation of both saved energy and programme costs is of importance. Detailed knowledge of the programme's cost-effectiveness is essential for EDF to achieve the saving obligations imposed by the French White Certificate scheme at the lowest cost. Results of this evaluation can support the development and implementation of further energy efficiency programmes with similar characteristics in other regions of France. The cost-effectiveness is determined from the perspective of the programme participant and the society as well as the energy company in charge of the programme. All cost and benefit components are calculated in Euro per kilowatt-hour, which allows a direct comparison of levelized costs of conserved energy with the avoidable costs of the energy supply system.
D2.1 report on local EPC situation and cross-country comparison matrix : QualDeEPC H2020 project
(2020)
Considering that 40% of the European Union's energy consumption can be traced back to its buildings, it is essential to improve their energy efficiency in order to achieve the EU's energy efficiency targets. Both the rate of energy renovation and its depth, i.e. the amount of energy savings during a renovation, need to be improved. Energy Performance Certificates (EPC), regulated by the EU's Energy Performance of Buildings Directive (EPBD), are an important instrument to enhance the market uptake of energy-efficient new buildings and the energy-efficient renovation of existing buildings.
Against this background, the Horizon2020 funded project QualDeEPC will work on EU-wide convergence of the building assessment and the issuance, design, and use of quality-enhanced EPCs as well as their recommendations for building renovation. The aim is to make these recommendations coherent with deep energy renovation towards a nearly-zero energy building stock by 2050.
The first part of the QualDeEPC project (work package 2) aims to identify the priorities for elements of EPC schemes that show a need to be improved, and for which the project will investigate further and propose how the elements can be improved. The first step in identifying these priorities is taking stock of the existing EPC schemes. Based on the input from all national consortium partners and other sources, the Wuppertal Institute prepared this detailed overview of the country-specific EPC assessment and certification procedures and their links to other policies and programmes, existing initiatives, and projects. The analysis was based on a list of almost 50 potential options for enhancing the existing EPC schemes.
The aim of this deliverable is to present this stock-taking by a detailed analysis on which of the potential enhanced EPC elements are already implemented in which form in which country, covering all 28 countries that were EU member states until 31 January 2020. All partners conducted bilateral interviews with the major actors in the EPC procedures, including executive bodies on EPC at regional and/or national level. For countries not represented in the Consortium, Wuppertal Institut and EAP conducted specific literature research, e.g. from the Concerted Action EPBD, and aimed to obtain contributions from other member states. The information collected allows a detailed presentation on the elements implemented as well as a cross-country comparison matrix (see Annex I) in this report, which outlines the current EPC practices across the EU regarding the elements of a good practice scheme or innovative improvement options, their comparability, compliance with EU legislation, and to which extent they differ or converge.
The results show, once more, the high diversity in EPC schemes across the EU. They also provide useful information in at least two directions: 1) which improvement options are not yet implemented at all or in sufficient quality in most QualDeEPC partner countries as well as other EU member states, and could therefore be interesting candidates for the further work of the QualDeEPC project in development, testing, discussion, and possibly implementation of elements for enhanced and converging EPC schemes; and 2) which countries, within or beyond the QualDeEPC project, offer good practice examples for the implementation of these options that could serve to guide the development and implementation in other countries. This deliverable will thus serve as a basis for the upcoming tasks to develop priorities and actual proposals for improvement of EPC schemes.
The QualDeEPC project is aiming to both improve quality and cross-EU convergence of Energy Performance Certificate schemes, and the link between EPCs and deep renovation: High-quality Energy Performance Assessment and Certification in Europe Accelerating Deep Energy Renovation. The objective of the project is to improve the practical implementation of the assessment, issuance, design, and use of EPCs as well as their renovation recommendations, in the participating countries and beyond.
This report serves as a compilation of the project's proposal for an enhanced and converging EPC assessment and certification scheme. It aims to provide a detailed description on the set of practical concepts, policy proposals, and tools for an enhanced EPC scheme towards deep renovation, developed by the QualDeEPC project. The project's substantial proposals both on EU and national level are presented in a comprehensive and rational way, guiding the relevant stakeholders, in particular the policy makers and competed bodies, on which steps need to be followed so as the proposals to be adapted and how the specific values can be determined in MSs. Furthermore, this report includes the project's proposal for defining "Deep Energy Renovation" based on a modified nZEB-based approach.
The project's priorities A) to G) addressed are presented in the following order in this document, reflecting the importance of the enhanced EPC template form and the training of EPC assessors in such schemes:
A) Improving the recommendations for renovation, which are provided on the EPCs, towards deep energy renovation;
E) High user-friendliness of the EPC, by way of an enhanced EPC template form, including an introduction of the proposed "Energy Rating" indicator;
D) Regular mandatory EPC assessor training or examination on assessment and renovation recommendations, required for certification/accreditation and registry;
B) Online tool for comparing EPC recommendations to deep energy renovation recommendations;
C) Creating Deep Renovation Network Platforms (DRNPs);
F) & G) Voluntary/mandatory advertising guidelines for EPCs and Improving compliance with the mandatory use of EPCs in real estate advertisement.
The original objectives for introducing Energy Performance Certificates (EPCs) were 1) to make energy performance transparent in the building market, as a measure of energy costs of using a building that a potential buyer or tenant would be interested in; and 2) to encourage energy efficiency renovation. However, the current implementation of EPC schemes in the Member States still shows significant challenges in achieving these two objectives. The recast of the EU Directive on the Overall Energy Performance of Buildings (EPBD) provides a chance to enhance both the usefulness and quality of EPCs and the EPC schemes overall.
This document aims to inform both the debate on the recast of the EPBD and the enhancement of national EPC schemes in EU Member States. It presents the draft policy recommendations of the Horizon 2020 QualDeEPC project for making the EPBD and the national schemes more effective, particularly for deep renovation, and enhance their quality overall. The policy recommendations particularly target the link between EPCs and deep (energy) renovation1, while increasing the levels of ambition and convergence across the EU in terms of building renovation. Deep (energy) renovation is crucial for mitigating climate change and for energy security. The EPBD and all of its articles, as well as national EPC schemes, should aim to make deep (energy) renovation the default. This objective would be embedded and ensured in EPC schemes, if the policy recommendations provided in this document were adopted and implemented.
Decoupling energy and resource use from growth in the Indian construction sector : a baseline study
(2017)
India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs.
The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector.
Policy brief 1 focuses on the baseline for decoupling in the Indian construction sector. The study draws attention to the existing scenario in terms of key policies, research and institutions linked to resources and energy in the sector.
India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs.
The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector.
Policy brief 2 focuses on analysing the potential for decoupling in the Indian buildings and construction sector. Primary and secondary research was conducted to identify the factors that influence decoupling. Subsequently, a framework was established to make it possible to measure the nature and extent of decoupling that is possible within the existing policy environment. Furthermore, gaps, drivers and barriers have been identified which could enable a potential analysis study on decoupling to be carried out. In addition, examples of good practice from Germany and other European countries have been studied with a view to learning lessons that can help to bridge the current gaps in India.
India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs.
The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector.
Policy brief 3 focuses on recommendations both at national and state level on the possible interventions that could result in resource and energy use being decoupled from growth in the Indian construction sector. Lack of a comprehensive policy on resource efficiency and the possibility of using secondary raw materials to obtain resource and impact decoupling continue to be the key issues that India will have to grapple with in the years to come.
India's present development trajectory is at a crucial juncture with a requirement to meet the demands of a population of over 1.2 billion while ensuring environmental sustainability. The resulting economic growth over the past two decades has over-exploited finite natural resources and led to tremendous environmental degradation. Therefore, decoupling economic growth from resource consumption is crucial in the transformation towards a green economy. Building construction is one of the most resource-intensive sectors, as well as creating a high impact on the environment. This study analyzes existing mechanisms in India's building construction sector that attempt to decouple economic growth from resource use and environmental impacts. The key contributors for decoupling are analyzed. Recommendations for regulations, market incentives, transparency, data monitoring and capacity-building are provided for an array of policy initiatives targeted at political and financial decision-makers at the national, state and local levels for different buildings.
The German climate change programme (2000) identified the residential sector as one of the main sectors in which to achieve additional GHG reductions. Our case study compiles results of existing evaluations of the key policies and measures that were planned and introduced and carries out some own estimates of achievements. We show, which emission reductions and which instruments where planned and what was delivered until 2004.
Legal instruments such as the revised building code were introduced later than planned and their effects will - at least partly - fall behind expectations. Other legal instruments such as minimum energy performance standards for domestic appliances etc. were - in spite of the programme - not implemented yet.
On the other hand, substantial financial incentives were introduced. Especially schemes granting low-interest loans for building renovation were introduced. However tax subsidies for low-energy buildings were phased out.
In general we can conclude from our case study that Germany was not able to compensate for the slower or restricted implementation of legal instruments through the introduction of financial incentives. Particularly the efficient use of electricity has been left aside as almost no further policy action was taken since 2001.
Thus energy efficiency in the residential sector will not deliver the GHG reductions planned for in the German climate change programme until 2005. From our findings we draw conclusions and recommendations towards policy makers: Which lessons are to be learnt and what has to be done in order to fully harness EE potentials in residential sector as planned for 2010?
Studies show that people can tolerate elevated temperatures in the presence of appreciable air movement (e.g., from using ceiling fans). This minimises the use of air-conditioners and extends their set-point temperature (Tset), resulting in energy savings in space cooling. However, there is little empirical evidence on the energy savings from using ceiling fans with Room Air-Conditioners (RACs). To address this gap, we analysed the energy performance of RACs with both fixed-speed compressors and inverter technology at different set-point temperatures and ceiling fan speed settings in 15 residential Mixed-Mode Buildings (MMBs) in India. Thermal comfort conditions (as predicted by the Indian Model for Adaptive Comfort-Residential (IMAC-R)) with minimum energy consumption were maintained at a set-point temperature (𝑇set) of 28 and 30 C and a fan speed setting of one. Compared with a Tset of 24 °C, a 𝑇set of 28 and 30 °C resulted in energy savings of 44 and 67%, respectively. With the use of RACs, a configuration with a minimum fan speed was satisfactory for an optimal use of energy and for maintaining the conditions of thermal comfort. In addition, RACs with inverter technology used 34-68% less energy than fixed-speed compressors. With the rising use of RACs, particularly in tropical regions, the study's outcomes offer a significant potential for reducing space-cooling energy consumption and the resultant greenhouse gas (GHG) emissions.
Energy efficiency of a range of domestic appliances covered by the labelling and ecodesign directives has improved significantly over the last 15 years. However, the power consumption of the German residential sector has remained relatively constant over this period. Besides other factors, such as decreasing average household size, the main reasons for this development were the increases of the types, features, size, equipment stock and usage times of appliances and devices in private households.
The project "Energy Sufficiency - strategies and instruments for a technical, systemic and cultural transformation towards sustainable restriction of energy demand in the field of construction and everyday life" investigates how the complementation of energy efficiency with energy sufficiency could lead to more user adequate domestic products and product-service systems and thereby result in an absolute reduction of power consumption.
In this project, energy sufficiency is defined as a strategy to reduce energy consumption by three approaches:
1. Quantitative reduction of sizes, features, usage times of devices etc.
2. Substitution of technical equipment in households by e.g.urban services.
3. Adjustment of technical services delivered by appliances toutility needed and desired by users.
The energy saving effects of an application of these approaches were modelled for different types of households and the energy saving potentials of energy sufficiency quantified. Innovative approaches for user adequate products and services were developed in open innovation workshops by the Design Thinking method. The paper summarizes some of the intermediate results of theoretical and transdisciplinary investigations of the project that runs until May 31, 2016. Furthermore, a first set of design criteria for user adequate appliances enabling energy sufficiency are developed based on these results. The paper concludes with suggestions for the future development of energy labelling and ecodesign derived from the design criteria and supplemented by examples of existing requirements according to the voluntary environmental label "Blauer Engel".
Energy sufficiency policy : an evolution of energy efficiency policy or radically new approaches?
(2015)
In the last four decades, energy efficiency increased significantly in OECD countries. However, only during the most recent years, total energy consumption started to decrease a little, and much more slowly than energy efficiency potentials would suggest. Energy sufficiency has therefore gained new attention as a way to limit and reduce total energy consumption of a household or a country overall.
The project "Energiesuffizienz" funded by the German ministry for research has examined what energy sufficiency actually is, and what householders, household members but also manufacturers and local authorities could do to make electricity use in the home more sufficient. The focus of this paper is the policy part of the project - the first comprehensive analysis of an energy sufficiency policy.
The objective is to find out how policy can support market actors in using the energy sufficiency options identified. As for energy efficiency policy, it starts with the gathering of potential sufficiency actions and the analysis of the relevant barriers all market actors face, to derive recommendations for which policy instruments need to be combined to an effective policy package, and which other pre-conditions have to be met. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some instruments of the energy sufficiency policy package may be the same as for energy efficiency - such as energy taxation, and linear or progressive energy prices. Some may simply adapt technology-specific energy efficiency policy instruments. Examples are progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require radical new approaches particularly to mitigate the drivers of non-sufficiency. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation. The paper presents these and other elements of an integrated energy sufficiency policy package resulting from this analysis.
Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents selected results of a research project funded by the German Federal Ministry of Education and Research that examined the potentials and barriers for energy sufficiency with a focus on electricity in households, how household members perceive sufficiency practices, and how policymakers could support and encourage these. Bottom-up calculations for an average 2-person household in Germany yielded a total electricity savings potential from energy efficiency and sufficiency combined of theoretically up to 75 %.
The continuous growth of per capita living space was identified as one important driver for additional energy consumption both for heat and electricity. The paper will present findings of a representative survey of 600 persons responsible for the housework. It revealed that a part of the households is already practicing sufficiency options or are open towards these. Up to 30 % of these households can imagine, given the right conditions and policy support, to move to a smaller dwelling or to share an apartment with others when they are older.
Results of a first comprehensive analysis of an energy sufficiency policy to encourage and support households to sufficiency practices form the second part of the paper, with a focus on the feasibility and potential effectiveness of instruments for limiting the growth in average living space per person. This includes a case study on fostering communal housing projects as a measure to reduce living space. Further, the feasibility of a cap scheme for the total electricity sales of a supplier to its customers was examined. Instruments supporting energy-efficient and sufficient purchase and use of equipment complete the integrated energy sufficiency and efficiency policy package.
The paper will finally present the project's conclusions on an integrated energy sufficiency policy package resulting from this analysis.
Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents both the partly new methods and the results of a comprehensive analysis of a micro- and meso-level energy sufficiency policy package to make electricity use in the home more sufficient and reduce at least the growth in per-capita dwelling size. The objective is to find out how policy can support households and their members, as individuals or as caregivers, but also manufacturers and local authorities in practicing energy sufficiency. This analysis needed an adapted and partly new set of methods we developed. Energy sufficiency does not only face barriers like energy efficiency, but also potential restrictions for certain household members or characteristics, and sometimes, preconditions have to be met to make more energy-sufficient routines and practices possible. All of this was analysed in detail to derive recommendations for which policy instruments need to be combined to an effective policy package for energy sufficiency. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some energy sufficiency policy instruments may be the same as for energy efficiency, such as energy pricing policies. Some may simply adapt technology-specific energy efficiency policy instruments. Examples include progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require new policy approaches. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation.
About 2 % of the overall electricity consumption of the EU is caused by circulators in single or double family homes and flats. A new technology of pumps with electronically commutated (EC) motor pumps is available now; it is one possible way to achieve a reduction in circulator annual electricity use by 60 % or more.
The project's objective is a market transformation towards this new very energy-efficient pump technologies - Energy+ pumps - for circulators in heating systems, both stand alone and integrated in boilers. Only few manufacturers have so far introduced the new pump technology to the market for single or double family homes and flats.
To bring more products to the market from all major manufacturers, the project will adapt and apply the technology procurement methodology as it was very successfully tested in the European Energy+ project on energy-efficient cold appliances.
Large buyers will be aggregated, to activate the pump and boiler manufacturers. Sales and training materials and a sizing spreadsheet software for installation contractors will be developed and applied. A competition both for energy-efficient products and marketing campaigns will be organised and the information on the Energy+ pumps will be disseminated widely through website, newsletter, media, and fairs.
This paper gives a short overview of this project and presents the results of the first project phases: a European wide market study on circulators and heating systems, and the first Energy+ lists for circulators, buyers and supporters.
Energy+ pumps : technology procurement for very energy efficient circulation pumps ; final report
(2009)
Estimating the sufficiency potential in buildings : the space between underdimensioned and oversized
(2019)
The emission reduction potential of energy efficiency and energy supply in buildings is estimated in various energy and climate action plans, scenarios, and potential analyses. But the third pillar of sustainability - sufficiency - is neglected in most studies.The increasing demand of space per person in the residential sector is a trend in most European countries. Its implication on energy use, demand for resources like land, building material, equipment, and waste production is enormous. Next to the ecological impact, the distribution of space has social and societal effects. Thus, sufficiency policies in the building sector complementing efficiency and energy policy are needed for a sustainable development of the European building stock.
But how can a sufficiency potential in the building sector be estimated? How much space and equipment is needed for a decent living and how much is too much? The paper proposes four areas of sufficiency in buildings: space, design and construction, equipment, and use. It presents a set of indicators, a quantitative estimate of energy savings from reduced per capita floor area, and visualises the sufficiency potential in European countries in an experimental approach. The final discussion focuses on the question: What does this mean for policy making?
Environmentally extended multiregional input-output (EE MRIO) tables have emerged as a key framework to provide a comprehensive description of the global economy and analyze its effects on the environment. Of the available EE MRIO databases, EXIOBASE stands out as a database compatible with the System of Environmental-Economic Accounting (SEEA) with a high sectorial detail matched with multiple social and environmental satellite accounts. In this paper, we present the latest developments realized with EXIOBASE 3 - a time series of EE MRIO tables ranging from 1995 to 2011 for 44 countries (28 EU member plus 16 major economies) and five rest of the world regions. EXIOBASE 3 builds upon the previous versions of EXIOBASE by using rectangular supply-use tables (SUTs) in a 163 industry by 200 products classification as the main building blocks. In order to capture structural changes, economic developments, as reported by national statistical agencies, were imposed on the available, disaggregated SUTs from EXIOBASE 2. These initial estimates were further refined by incorporating detailed data on energy, agricultural production, resource extraction, and bilateral trade. EXIOBASE 3 inherits the high level of environmental stressor detail from its precursor, with further improvement in the level of detail for resource extraction. To account for the expansion of the European Union (EU), EXIOBASE 3 was developed with the full EU28 country set (including the new member state Croatia). EXIOBASE 3 provides a unique tool for analyzing the dynamics of environmental pressures of economic activities over time.
The core objective of Energy Efficiency Watch 3 (EEW3) is to establish a constant feedback loop on the implementation of European and national energy efficiency policies and thus enable both compliance monitoring and mutual learning on effective policy making across the EU. The project team applied a mixed-method approach to assess energy efficiency policy developments in EU Member States. EEW3 analysed the progress made in the implementation of energy efficiency policies in European Member States since the publication of the second National Energy Efficiency Action Plans (NEEAPs) in 2011 by screening official documents, sought experts' knowledge via an EU-wide survey and has been creating new consultation platforms with a wide spectrum of stakeholders including parliamentarians, regions, cities and business stakeholders. Results are presented in Country Reports for each of the 28 Member States, the Expert Survey Report, 10 Case Studies presenting outstanding energy efficiency policies in Europe, the Key Policy Conclusions, the project summary report in brochure format and this Feedback Loop Report, which summarises the overall EEW3 portfolio.
Functional service contracts for white goods : selling a function instead of a product (FUNSERVE)
(2001)
The challenges and also potentials of the energy transition are tremendous in Germany, as well as in Japan. Sometimes, structures of the old energy world need "creative destruction" to clear the way for innovations for a decarbonized, low-risk energy system. In these times of disruptive changes, a constructive and sometimes controversial dialog within leading industrial nation as Japan and Germany over the energy transition is even more important. The German-Japanese Energy Transition Council (GJETC) released a summarizing report for the first project phase 2016-2018. It includes jointly formulated recommendations for politics as well as a controversial dialogue part.
The Council jointly states and recommends that:
Ambitious long-term targets and strategies for a low-carbon energy system must be defined and ambitiously implemented; Germany and Japan as high technology countries need to take the leadership.
Both countries will have to restructure their energy systems substantially until 2050 while maintaining their competitiveness and securing energy supply.
Highest priority is given to the forced implementation of efficiency technologies and renewable energies, despite different views on nuclear energy.
In both countries all relevant stakeholders - but above all the decision-makers on all levels of energy policy - need to increase their efforts for a successful implementation of the energy transition.
Design of the electricity market needs more incentives for flexibility options and for the extensive expansion of variable power generation, alongside with strategies for cost reduction for electricity from photovoltaic and wind energy.
The implementation gap of the energy efficiency needs to be closed by an innovative energy policy package to promote the principle of "Energy Efficiency First".
Synergies and co-benefits of an enhanced energy and resource efficiency policy need to be realized.
Co-existence of central infrastructure and the growing diversity of the activities for decentralization (citizens funding, energy cooperatives, establishment of public utility companies) should be supported.
Scientific cooperation can be intensified by a joint working group for scenarios and by the establishment of an academic exchange program.
The German-Japanese Energy Transition Council (GJETC) was established in 2016 by experts from research institutions, energy policy think tanks, and practitioners in Germany and Japan.
The objectives and main activities of the Council and the supporting secretariats are to identify and analyze current and future issues regarding policy frameworks, markets, infrastructure, and technological developments in the energy transition, and to hold Council meetings to exchange ideas and propose better policies and strategies. In its second project phase (2018-2020), the GJETC had six members from academia on the Japanese side, and eight members on the German side, with one Co-Chair from each country.
From October 2018 to March 2020, the GJETC worked on and debated six topics:
1) Digitalization and the energy transition. 2) Hydrogen society. 3) Review of German and Japanese long-term energy scenarios and their evaluation mechanism. 4) Buildings, energy efficiency, heating/cooling. 5) Integration costs of renewable energies. 6) Transport and sector coupling.
The outputs and the recommendations of the second phase of the GJETC are summarized in this report.
Energy efficiency has multiple benefits. It usually is a win-win option for all aspects of sustainability - environment, social objectives, and economy. We need to evaluate and communicate these multiple benefits - to citizens, companies, and policy-makers. Due to strong market barriers, effective governance and policy packages for energy efficiency are needed. Evaluation shows effective policy can achieve around 2% per year of additional energy savings.
Contemporary combined heat and power (CHP) systems are often based on fossil fuels, such as natural gas or heating oil. Thereby, small-scale cogeneration systems are intended to replace or complement traditional heating equipment in residential buildings. In addition to space heating or domestic hot water supply, electricity is generated for the own consumption of the building or to be sold to the electric power grid.
The adaptation of CHP-systems to renewable energy sources, such as solid biomass applications is challenging, because of feedstock composition and heat integration. Nevertheless, in particular smallscale CHP technologies based on biomass gasification and solid oxide fuel cells (SOFCs) offer significant potentials, also regarding important co-benefits, such as security of energy supply as well as emission reductions in terms of greenhouse gases or air pollutants. Besides emission or air quality regulations, the development of CHP technologies for clean on-site small-scale power generation is also strongly incentivised by energy efficiency policies for residential appliances, such as e.g. Ecodesign and Energy Labelling in the European Union (EU). Furthermore, solid residual biomass as renewable local energy source is best suited for decentralised operations such as micro-grids, also to reduce long-haul fuel transports. By this means such distributed energy resource technology can become an essential part of a forward-looking strategy for net zero energy or even smart plus energy buildings.
In this context, this paper presents preliminary impact assessment results and most recent environmental considerations from the EU Horizon 2020 project "FlexiFuel-SOFC" (Grant Agreement no. 641229), which aims at the development of a novel CHP system, consisting of a fuel flexible smallscale fixed-bed updraft gasifier technology, a compact gas cleaning concept and an SOFC for electricity generation. Besides sole system efficiencies, in particular resource and emission aspects of solid fuel combustion and net electricity effects need to be considered. The latter means that vastly less emission intensive gasifier-fuel cell CHP technologies cause significant less fuel related emissions than traditional heating systems, an effect which is further strengthened by avoided emissions from more emission intensive traditional grid electricity generation. As promising result, operation "net" emissions of such on-site generation installations may be virtually zero or even negative. Additionally, this paper scopes central regulatory instruments for small-scale CHP systems in the EU to discuss ways to improve the framework for system deployment.
To achieve the EU's energy efficiency targets, both the rate of building energy renovation and its depth, i.e., the amount of energy savings post renovation need to be improved. Energy Performance Certificates (EPCs) are key to make energy efficiency measures transparent for the building market and to promote the energy efficiency of buildings through renovation. The revision of the Energy Performance of Buildings Directive (EPBD) is seen as a pre-condition to meet the Renovation Wave objectives and to reach a highly energy efficient and decarbonized building stock by 2050. One focus of the current revision of the EPBD is therefore the improvement of EPCs. QualDeEPC - High-quality Energy Performance Assessment and Certification in Europe Accelerating Deep Energy Renovation, funded under the EU's Horizon 2020 programme, is a project that aims to improve EPCs. Following an EU-wide review of existing EPC schemes, and extensive stakeholder discussions in the seven partner countries, QualDeEPC found that EPCs and EPC schemes need to enhance particularly in the following three ways:
1. Establish a close link between EPCs and deep energy renovation
2. Improve the quality of EPC schemes, i.e., both the EPCs and their data, and the processes of assessment, certification, verification
3. Improve cross-EU convergence of EPC schemes.
How are neighbours doing? : Making energy efficiency efforts comparable through NEEAP screening
(2012)
How much energy saving is 1 % per year? : We still don t know, but we know better how to find out
(2009)
The Energy End-use Efficiency and Energy Services Directive (ESD) of the European Union requires the member states to define and attain an overall target of at least 9 % annual energy savings between 2008 and 2016. Even if this target is indicative, this is the first international framework mandating countries to report on their energy savings results and prove achievement of their targets. The directive thus also required the development of harmonised calculation methods that can be used by member states for this proof and reporting. Existing literature covers most of the usual issues related to energy savings evaluation, but mostly looking at single, given energy efficiency programmes or policies. The evaluation objective for the ESD implementation is different, as it aims at accounting for the whole energy savings achieved in a country. Moreover, one of the main difficulties is the diversity in history and experience on this topic among the member states. In this context, the European project EMEEES has worked out an integrated system of bottom-up and top-down methods for the measurement of energy savings. The paper presents the overview of its final results. The proposals, inter alia, include 20 bottom-up and 14 top-down case applications of general evaluation methods. They enable more than 90 % of the potential energy savings to be measured and reported. They were used as a starting point by the European Commission to develop the methods recently recommended to the member states. Furthermore, the paper briefly discusses the importance of the quantity to be measured-all or additional energy savings - and the effect of measures implemented before the entering into force of the ESD ("early action"), and what this meant for the methods to be developed. It compares the main elements of calculation needed to ensure consistent results between bottom-up and top-down methods at the overall national level. Finally, general conclusions are drawn about what could be the next steps in developing an evaluation system that enables a high degree of comparability of results between different countries.
As part of the discussion on a new international climate agreement, which is supposed to be concluded by 2015, the European Commission conducted a stakeholder consultation, to which the Wuppertal Institute contributed. The Wuppertal Institute suggests that Parties should revisit the widely shared assumption that there is a trade-off between climate protection and economic well-being. The problem is not so much the macro-economic outlook. The problem is that climate policy causes substantial distributional impacts and thus naturally leads to resistance. The Wuppertal Institute recommends to reconsider the political wisdom of the quantity-based approach that climate policy has so far been based on. As long as emissions are seen as inextricably linked to economic well-being, framing commitments in terms of emission reductions directly triggers the perspective of seeing climate protection as an economic loss. Commitments should ideally be multi-dimensional. Possible types of commitments to consider may include scaling up certain climate-friendly technologies, improving energy efficiency, limiting fossil fuel use and fossil fuel extraction, or emission price commitments. The strongest mobilisation of political support might perhaps be achieved by framing commitments as a joint international undertaking to provide universal access to sustainable energy services by a specific date.
In spite of differences in energy policies and supply, Japan and Germany have to master similar challenges: To reorganize the energy supply system towards - in the long term - being reliable, affordable, low in risks and resource use, and climate-neutral. At the same time, the ecological modernization should maintain or even strengthen international competitiveness. To better address these challenges, a bi-national expert council has been established between the two high-tech countries in 2016 - the GJETC.
The aim of the GJETC is to show that despite different starting points, a national energy transition can be more successful, if both countries learn from their strengths and also weaknesses, to avoid the latter. If the implementation of an energy transition in the two countries is socially and economically sound and advances technology innovation and deployment, it may not only double success, but can also serve as blue prints for other countries, especially due to learning from similarities and differences. For example: Why is per capita energy consumption higher in transport in Germany, but energy intensity higher in Japan's building sector? How can variable renewable energies be integrated in an efficient energy system at lowest costs?
The Council meets twice a year, holds stakeholder dialogues and outreach events, and prepares policy papers on strategic topics of mutual interest. Four comprehensive studies, each in cooperation of a German and a Japanese research institute, have been the basis for 15 joint key recommendations during the 1st phase. The 2nd phase to 2020 will study the role of hydrogen and digitalisation for the energy transition, as well as other topics. The paper presents the findings and recommendations of the GJETC of the first phase 2016-18 as well as first results of the second phase. It also reviews the setup of the GJETC and the way it works, to assess if and how it can serve as a role model of bilateral cooperation on the energy transition.
Using natural gas for fuel releases less carbon dioxide per unit of energy produced than burning oil or coal, but its production and transport are accompanied by emissions of methane, which is a much more potent greenhouse gas than carbon dioxide in the short term. This calls into question whether climate forcing could be reduced by switching from coal and oil to natural gas. We have made measurements in Russia along the world's largest gas-transport system and find that methane leakage is in the region of 1.4%, which is considerably less than expected and comparable to that from systems in the United States. Our calculations indicate that using natural gas in preference to other fossil fuels could be useful in the short term for mitigating climate change.
The economic assessment of low-carbon energy options is the primary step towards the design of policy portfolios to foster the green energy economy. However, today these assessments often fall short of including important determinants of the overall cost-benefit balance of such options by not including indirect costs and benefits, even though these can be game-changing. This is often due to the lack of adequate methodologies.
The purpose of this paper is to provide a comprehensive account of the key methodological challenges to the assessment of the multiple impacts of energy options, and an initial menu of potential solutions to address these challenges.
The paper first provides evidence for the importance of the multiple impacts of energy actions in the assessment of low-carbon options.
The paper identifies a few key challenges to the evaluation of the co-impacts of low-carbon options and demonstrates that these are more complex for co-impacts than for the direct ones. Such challenges include several layers of additionality, high context dependency, and accounting for distributional effects.
The paper continues by identifying the key challenges to the aggregation of multiple impacts including the risks of overcounting while taking into account the multitude of interactions among the various co-impacts. The paper proposes an analytical framework that can help address these and frame a systematic assessment of the multiple impacts.
Energy efficiency improvements have numerous benefits/impacts additional to energy and greenhouse gas savings, as has been shown and analysed e.g. in the 2014 IEA Report on "Multiple Benefits of Energy Efficiency". This paper presents the Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe"), aiming at calculating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. The project covers the most relevant technical energy efficiency improvement actions and estimates impacts of reduced air pollution (and its effects on human health, eco-systems/crops, buildings), improved social welfare (incl. disposable income, comfort, health, productivity), saved biotic and abiotic resources, and energy system, energy security, and the macroeconomy (employment, economic growth and public budget). This paper explains how the COMBI energy savings potential in the EU 2030 is being modelled and how multiple impacts are assessed. We outline main challenges with the quantification (choice of baseline scenario, additionality of savings and impacts, context dependency and distributional issues) as well as with the aggregation of impacts (e.g. interactions and overlaps) and how the project deals with them. As research is still ongoing, this paper only gives a first impression of the order of magnitude for additional multiple impacts of energy efficiency improvements may have in Europe, where this is available to date. The paper is intended to stimulate discussion and receive feedback from the academic community on quantification approaches followed by the project.
The COMBI project aimed at quantifying the multiple non-energy benefits of energy efficiency in the EU-28 area and incorporate those multiple impacts into decision-support frameworks for policy-making. Therefore, all multiple impacts of energy efficiency are analysed from an overall societal view in the project. The COMBI policy recommendations resulting from the evaluation outcomes are presented in this report.
COMBI draws on a reference scenario until the year 2030 including existing policies. By modelling 21 sets of "energy efficiency improvement" (EEI) actions, a second efficiency scenario was modelled amounting to additional energy savings of around 8% p.a. in 2030, and that is comparable to the EUCO+33 to EUCO+35 scenario. All figures quantified by COMBI relate to additional values, i.e. additional impacts resulting from additional EEI actions beyond the reference scenario as a consequence of additional policies. The project quantified in total 31 individual impact indicators with appropriate state-of-the-art models.
An important instrument to enhance the market uptake of energy-efficient new buildings and the energy-efficient renovation of existing buildings in the European Union (EU) are the Energy Performance Certificates (EPC). However, their implementation and use has varied between EU Member States. The European Commission has therefore provided funding to a number of Horizon2020 projects to develop next-generation EPC schemes.
One of these is the QualDeEPC project, aiming to both improve quality and cross-EU convergence of EPC schemes, and particularly the link between EPCs and deep renovation. The objective of the project is to improve the practical implementation of the assessment, issuance, design, and use of EPCs as well as their renovation recommendations, in the participating countries and beyond.
This paper presents the policy proposals and concepts for tools that the QualDeEPC project has developed as priorities for enhanced EPC schemes:
- Improving the recommendations for renovation, which are provided on the EPCs, towards deep energy renovation
- An online tool for comparing EPC recommendations to deep energy renovation recommendations
- Creating Deep Renovation Network Platforms (One-stop Shops plus networking and joint communication of supply-side actors)
- Regular mandatory EPC assessor training (on assessment and renovation recommendations) required for certification/accreditation and registry
- Achieving a high user-friendliness of the EPC
- Voluntary/mandatory advertising guidelines for EPCs
- Improving compliance with the mandatory use of EPCs in real estate advertisements
The paper will focus on the aspects related to improving the impact of EPCs for stimulating deep renovation. It will also present lessons learnt from the discussion with stakeholders at national and European workshops and from the testing of the proposals and tools in around 100 buildings, as well as from the first steps of their country-specific adaptation.
Options and potentials for energy end-use efficiency and energy services : summary ; final report
(2006)
The core objective of Energy Efficiency Watch 3 (EEW3) is to establish a constant feedback loop on the implementation of European and national energy efficiency policies and thus enable both compliance monitoring and mutual learning on effective policy making across the EU. The project team applied a mixed-method approach to assess energy efficiency policy developments in EU Member States. It analysed progress of national policies by screening official documents, sought experts' knowledge via an EU-wide survey and has been creating new consultation platforms with a wide spectrum of stakeholders including parliamentarians, regions, cities and business stakeholders. Analysis of the National Energy Efficiency Action Plans (NEEAPs), the expert survey with input from over 1,100 experts on policy ambition and progress in each Member State, as well as 28 Country Reports have been central elements in EEW3. This paper will present the main conclusions and policy recommendations of EEW3. In doing so, it will first summarise the findings of the document analysis based on the 28 Country Reports, showing developments of energy efficiency policies since the second NEEAP in 2011 in a cross-country overview for six sectors. These findings are then contrasted with the experts' perspective on progress in energy efficiency policies in their countries as collected in the EEW survey. Moreover, ten case studies of good practice energy efficiency policies are shown, three of them will be presented in more detail. The paper ends with key policy conclusions for improving the effectiveness of European energy efficiency policies. A key finding is that policy implementation has improved a lot since 2011 but more is needed to achieve the EED Art. 7 and other targets.
Proposals for contributions of emerging economies to the climate regime under the UNFCCC post 2012
(2008)
Under the principle of "common but differentiated responsibilities” (Article 3.1 of the UNFCCC) non-Annex I parties have so far been exempted from emission limitation or reduction commitments. However, the pressure is mounting on those countries, especially major emitting developing countries, to contribute actively to the mitigation of climate change. Participation by these developing countries in a future international climate regime is often called for, but it is usually unclear how and how much these countries should participate, what kind of support they need and in which sectors. This project aims to provide a more detailed view on six countries to understand how they could best make a contribution to the regime and how they could best be supported in limiting their greenhouse gas emissions.
In this paper we report on the approach and findings of the research partnership "Prospects for decentralised infrastructures amid the competing demands of competition, climate protection and quality (INFRAFUTUR)." INFRAFUTUR stands for the future of decentralised infrastructures. We asked which strategies would be appropriate to safeguard supply and disposal services in the energy, water/sewage and waste sectors to private households and business on an enduring basis. In doing so, we focused our analysis on municipal and mixed municipal-private enterprises as players.